Evolution of Residual Stresses with Fatigue Crack Growth in a Variable Polarity Plasma Arc–Welded Aluminum Alloy Compact Tension Specimen
Source abstract
Abstract
The evolution of the residual stresses during fatigue crack growth in a welded compact tension C(T) specimen was measured using neutron diffraction. The measurements were performed by growing a fatigue crack in a sample in situ on a neutron diffractometer. The stresses were found to be unaffected by crack growth through the compressive part of the initial residual stress field. The residual stresses at the crack tip increased when the crack entered the tensile residual stress field to maintain residual stress equilibrium. Finite element (FE) modeling of the evolution of the residual stresses showed good correlation with the experimental results. The residual stress evolution was found to be governed by redistribution of the initial stress field and only slightly affected by fatigue-induced effects at the measured spatial resolution (2 mm × 2 mm × 7 mm).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Advanced Welding Techniques Analysis · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. J.F. Throop, H.S. Reemsnyder: Residual Stress Effects in Fatigue, ASTM STP 776, ASTM, Philadelphia, PA, 1981, pp. 1–2
2. M.E. Fitzpatrick, A. Lodini: Analysis of Residual Stress Using Neutron and Synchrotron Radiation, Taylor & Francis, London, 2003, pp. 296–31810.1201/9780203608999 ↗
3. L. Edwards, P.J. Bouchard, M. Dutta, D.Q. Wang, J.R. Santisteban, S. Hiller, M.E. Fitspatrick: Int. J. Pres. Ves. Pip., 2005, vol. 83, pp. 288–9810.1016/j.ijpvp.2004.08.007 ↗
4. R.A. Oven, R.V. Preston, P.J. Withers, H.R. Shercliff, P.J. Webster: Mater. Sci. Eng. A, 2003, vol. 346, pp. 159–67.10.1016/S0921-5093(02)00547-6 ↗
5. Y. Zhang, S. Ganguly, L. Edwards, M.E. Fitzpatrick: Acta Mater., 2004, vol. 52, pp. 5225–3210.1016/j.actamat.2004.07.045 ↗
6. S. Prathar, V. Stelmukh, M.T. Hutchings, M.E. Fitzpatrick, U. Stuhr, L. Edwards: Mater. Sci. Eng. A, 2006, vol. 437, pp. 46–5310.1016/j.msea.2006.04.061 ↗
7. J. Brouard, J. Lin, and P.E. Irving: Proc. Fatigue 2006, Atlanta, GA, June 2006
8. G.H. Farrahi, G.H. Majzoobi, F. Hosseinzadeh, S.M. Harati: Eng. Fract. Mech., 2006, vol. 73, pp. 1772–8210.1016/j.engfracmech.2006.03.004 ↗
9. C.D.M. Liljedahl, M.L Tan, O. Zanellato, S. Ganguly, M.E. Fitzpatrick, and L. Edwards: Eng. Fract. Mech., 2008, vol. 75, pp. 3881–9410.1016/j.engfracmech.2008.02.005 ↗
10. S. Ganguly, M.E. Fitzpatrick, L. Edwards: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 411–2010.1007/s11661-006-0012-3 ↗
11. A.J. Allen, M.T. Hutchings, C.G. Windsor, and C. Andreani: Adv. Phys., 1985, vol. 34 (4), pp. 445–7310.1080/00018738500101791 ↗
12. W.L. Bragg: Proc. Cambridge Philosophical Society, Royal Society, London, 1914, vol. 17, pp. 43–57
13. J.A. Dann, M.R. Daymond, L. Edwards, J.A. James, J.R. Santisteban: Physica B, 2004, vol. 350. pp. 511–1410.1016/j.physb.2004.03.139 ↗
14. T.M. Holden, H. Suzuki, D.G. Carr, M.I. Ripley, B. Clousen: Mater. Sci. Eng. A, 2006, vol. 437, pp. 33–3710.1016/j.msea.2006.04.055 ↗
15. V. Stelmukh, L. Edwards, S. Ganguly: Text. Microstruct., 2003, vol. 35, pp. 175–8310.1080/07303300310001628607 ↗
16. G.S. Pawley: J. Appl. Crystallogr., 1981, vol. 14, pp. 357–6110.1107/S0021889881009618 ↗
17. M.R. Daymond, M.A. Bourke, R.B. Von Dreele, B. Clausen, T. Lorentzen: J. Appl. Phys., 1997, vol. 82, pp. 1554–6210.1063/1.365956 ↗
18. E. Oliver, J. Santisteban, J. James, M. Daymond, and J. Dann: ENGIN-X User Manual, ISIS, Rutherford Laboratory, Didcot, UK, 2004
19. R.V. Preston, H.R. Shercliff, P.J. Withers, S.D. Smith: Sci. Technol. Weld. Join., 2003, vol. 8, pp. 10–1810.1179/136217103225008937 ↗
20. R.V. Preston, H.R. Shercliff, P.J. Withers, S.D. Smith: Acta Mater., 2004, vol. 52, pp. 4973–8310.1016/j.actamat.2004.06.048 ↗
21. L.E. Lindgren: Comput. Meth. Appl. Mech. Eng., 2006, vol. 195, pp. 6710–3510.1016/j.cma.2005.08.018 ↗
22. ABAQUS Version 6.5, Hibbitt, Karlsson & Sorensen, Inc., Rising Sun Mills, RI, 2005
23. C.H.R. Boller, T. Seeger: Materials Data for Cyclic Loading, Part D: Aluminium and Titanium Alloys, Materials Science Monographs, 42D, Elsevier Science Publishers B.V., Amsterdam, Netherlands, 1987, pp. 108–24