journal article·2016-01

Effect of Vanadium Nitride Precipitation on Martensitic Transformation and Mechanical Properties of CrMnNi Cast Austenitic Steels

Marco Wendler, Benedikt Reichel, Ralf Eckner, Olga Fabrichnaya, Lutz Krüger, Andreas Weiß, Javad Mola

Publisher page

Abstract

The microstructural evolution and mechanical properties of two cast Fe-15Cr-6Mn-3Ni-0.5Si-0.2N-0.1C (concentrations in wt pct) steels containing no vanadium and 0.65 wt pct vanadium were investigated under uniaxial tensile loading for room temperature (RT) and 373 K (100 °C). The alloy development was focused on the formation of nanosized vanadium nitride precipitates in the austenite to serve as obstacles to dislocation motion. The austenitic steels exhibited transformation- and twinning-induced plasticity (TRIP/TWIP) effects and the planar glide of dislocations in the austenite. The triggering stress for the RT strain-induced σ γ→α′ formation increased by 190 MPa, and the transformation occurred at higher strain levels due to the presence of VN precipitates. The occurrence of the TWIP effect during tensile testing at 373 K (100 °C) of both steels resulted in engineering strains above 50 pct. The yield strength (YS) of the VN-containing steel was 420 MPa at RT, 52 MPa higher than the vanadium-free alloy. The difference increased to 59 MPa at 373 K (100 °C) with the VN-containing alloy exhibiting a YS of 311 MPa.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. L. Krüger, S. Wolf, U. Martin, P. Scheller, A. Jahn, and A. Weiß: DYMAT, 2009, vol. 2, pp. 1069–74.
2. A. Jahn, A. Kovalev, A. Weiß, and P.R. Scheller: Steel Res. Int., 2011, vol. 82, pp. 1108–12.10.1002/srin.201100063 ↗
3. M. Sawada, K. Adachi, and T. Maeda: ISIJ Int., 2011, vol. 51, pp. 991–98.10.2355/isijinternational.51.991 ↗
4. S. Sadeghpour, A. Kermanpur, and A. Najafizadeh: Mater. Sci. Eng. A, 2013, vol. 584, pp. 177–83.10.1016/j.msea.2013.07.014 ↗
5. W. Shi, L. Li, C.-X. Yang, R.-Y. Fu, L. Wang, and P. Wollants: Mater Sci Eng A, 2006, vol. 429, pp. 247–51.10.1016/j.msea.2006.05.069 ↗
6. I. E. Locci and G. M. Michal: Metall. Trans. A, 1989, vol. 20A, pp. 237–45.10.1007/BF02670249 ↗
7. G. Gottstein: in Phys. Found. Mater. Sci., Springer, Berlin Heidelberg, 2004, pp. 197–302.10.1007/978-3-662-09291-0_7 ↗
8. H.-W. Yen, M. Huang, C.P. Scott, and J.-R. Yang: Scripta Mater., 2012, vol. 66, pp. 1018–23.10.1016/j.scriptamat.2012.02.002 ↗
9. E. G. Moghaddam, N. Varahram, and P. Davami: Mater. Sci. Eng. A, 2012, vol. 532, pp. 260–66.10.1016/j.msea.2011.10.089 ↗
10. E. G. Moghaddam, N. Karimzadeh, N. Varahram, and P. Davami: Mater. Sci. Eng. A, 2013, vol. 585, pp. 422–29.10.1016/j.msea.2013.07.082 ↗
11. C. Scott, B. Remy, J.-L. Collet, A. Cael, C. Bao, F. Danoix, B. Malard, and C. Curfs: Int. J. Mater. Res., 2011, vol. 102, pp. 538–49.10.3139/146.110508 ↗
12. D.-B. Park, M.-Y. Huh, W.-S. Jung, J.-Y. Suh, J.-H. Shim, and S.-C. Lee: J. Alloys Compd., 2013, vol. 574, pp. 532–38.10.1016/j.jallcom.2013.05.106 ↗
13. D.-B. Park, S.-M. Hong, K.-H. Lee, M.-Y. Huh, J.-Y. Suh, S.-C. Lee, and W.-S. Jung: Mater. Charact., 2014, vol. 93, pp. 52–61.10.1016/j.matchar.2014.03.012 ↗
14. L. Remy and A. Pineau: Mater. Sci. Eng., 1977, vol. 28, pp. 99–107.10.1016/0025-5416(77)90093-3 ↗
15. W. Bleck, A. Frehn, S. Kranz, A. Franke, and A. Weiss: Steel Res., 2000, vol. 71, pp. 303–9.10.1002/srin.200001233 ↗
16. O Grässel, L Krüger, G Frommeyer, and L.W Meyer: Int. J. Plast., 2000, vol. 16, pp. 1391–1409.10.1016/S0749-6419(00)00015-2 ↗
17. H. Gutte and A. Weiss: State Doctorate, TU Bergakademie Freiberg, Freiberg, 2011.
18. K. Sato, M. Ichinose, Y. Hirotsu, and Y. Inoue: ISIJ Int., 1989, vol. 29, pp. 868–77.10.2355/isijinternational.29.868 ↗
19. A. Dumay, J.-P. Chateau, S. Allain, S. Migot, and O. Bouaziz: Mater. Sci. Eng. A, 2008, vol. 483-484, pp. 184–87.10.1016/j.msea.2006.12.170 ↗
20. A. Saeed-Akbari, L. Mosecker, A. Schwedt, and W. Bleck: Metall. Mater. Trans. A, 2012, vol. 43, pp. 1688–1704.10.1007/s11661-011-0993-4 ↗
21. S Martin, S. Wolf, U. Martin, and L. Krüger: Solid State Phenom., 2011, vol. 172-174, pp. 172–77.10.4028/www.scientific.net/SSP.172-174.172 ↗
22. T.-H. Lee, E. Shin, C.-S. Oh, H.-Y. Ha, and S.-J. Kim: Acta Mater., 2010, vol. 58, pp. 3173–86.10.1016/j.actamat.2010.01.056 ↗
23. L. Bracke, G. Mertens, J. Penning, B.C. De Cooman, M. Liebherr, and N. Akdut: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 307–17.10.1007/s11661-006-0002-5 ↗
24. J.-O. Andersson, T. Helander, L. Höglund, P. Shi, and B. Sundman: CALPHAD, 2002, vol. 26, pp. 273–312.10.1016/S0364-5916(02)00037-8 ↗
25. P. Franke and H. J. Seifert: Binary Systems and Ternary Systems from C-Cr-Fe to Cr-Fe-W: Thermodynamic Properties of Inorganic Materials Compiled by SGTE, Subvolume C: Ternary Steel Systems, Phase Diagrams and Phase Transition Data, Springer, Berlin, London, 2012.
26. A. Weidner, A. Yanina, S. Guk, R. Kawalla, and H. Biermann: Steel Res. Int., 2011, vol. 82, pp. 990–97.10.1002/srin.201100087 ↗
27. J. J. Irani and R. T. Weiner: Nature, 1965, vol. 205, pp. 795–795.10.1038/205795a0 ↗
28. Miss J. M. Silcock: Acta Metall., 1966, vol. 14, pp. 687–92.
29. Ö.A. Atasoy, K. Özbaysal, and O.T. Inal: J. Mater. Sci., 1989, vol. 24, pp. 1393–98.10.1007/BF02397078 ↗
30. B. Fultz and J. M. Howe: Transmission Electron Microscopy and Diffractometry of Materials (Third Edition), Springer, Heidelberg, 2007.
31. S. Farjami, K. Hiraga, and H. Kubo: Mater. Trans., 2004, vol. 45, pp. 930–35.10.2320/matertrans.45.930 ↗
32. T. Thorvaldsson and G.L. Dunlop: Met. Sci., 1982, vol. 16, pp. 184–90.10.1179/msc.1982.16.4.184 ↗
33. H. O. Andrén, A. Henjered, and H. Nordén: J. Mater. Sci., 1980, vol. 15, pp. 2365–68.10.1007/BF00552329 ↗
34. M. Wendler, J. Mola, L. Krüger, and A. Weiss: Steel Res. Int., 2014, vol. 85, pp. 803–10.10.1002/srin.201300271 ↗
35. A. Weiss, H. Gutte, M. Radtke, and P.R. Scheller: WO/2008/009722, Jan. 2008.
36. G. B. Olson and M. Cohen: Metall. Trans. A, 1975, vol. 6, pp. 791–95.10.1007/BF02672301 ↗
37. J. Talonen and H. Hänninen: Acta Mater., 2007, vol. 55, pp. 6108–18.10.1016/j.actamat.2007.07.015 ↗
38. Q.-X. Dai, A.-D. Wang, X.-N. Cheng, and X.-M. Luo: Chin. Phys., 2002, vol. 11, pp. 596–600.10.1088/1009-1963/11/6/315 ↗
39. F. Lecroisey and A. Pineau: Metall. Trans., 1972, vol. 3, pp. 391–400.10.1007/BF02642042 ↗
40. S.-J. Kim, T.-H. Lee, and C.-S. Oh: Steel Res. Int., 2009, vol. 80, pp. 467–72.
41. T.-H. Lee, H.-Y. Ha, J.-Y. Kang, J. Moon, C.-H. Lee, and S.-J. Park: Acta Mater., 2013, vol. 61, pp. 7399–7410.10.1016/j.actamat.2013.08.046 ↗
42. G.L. Huang, D.K. Matlock, and G. Krauss: Metall. Trans. A, 1989, vol. 20A, pp. 1239–45.10.1007/BF02647406 ↗
43. M. Wendler, J. Mola, B. Reichel, L. Krüger, and A. Weiß: in HNS 2014, Hamburg, 2014.
44. M. Wendler, J. Mola, B. Reichel, L. Krüger, and A. Weiß: in HMnS 2014, Aachen, 2014, pp. 407–10.
45. A. Vinogradov, A. Lazarev, M. Linderov, A. Weidner, and H. Biermann: Acta Mater., 2013, vol. 61, pp. 2434–49.10.1016/j.actamat.2013.01.016 ↗
46. E. Hornbogen and H. Kreye: J. Mater. Sci., 1982, vol. 17, pp. 979–88.10.1007/BF00543516 ↗
47. A. K. Vasudévan and R. D. Doherty: Acta Metall., 1987, vol. 35, pp. 1193–1219.10.1016/0001-6160(87)90001-0 ↗
48. U.F. Kocks and H. Mecking: Prog. Mater. Sci., 2003, vol. 48, pp. 171–273.10.1016/S0079-6425(02)00003-8 ↗
49. T.S Byun, N Hashimoto, and K Farrell: Acta Mater., 2004, vol. 52, pp. 3889–99.10.1016/j.actamat.2004.05.003 ↗
50. S. Wolf: Doctoral Thesis, Shaker, Aachen, 2012.
51. J. Bouquerel, K. Verbeken, and B. C. De Cooman: Acta Mater., 2006, vol. 54, pp. 1443–56.10.1016/j.actamat.2005.10.059 ↗
52. L. Samek, E. De Moor, J. Penning, and B. C. De Cooman: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 109–24.10.1007/s11661-006-0157-0 ↗