journal article·2014-07

Influence of Strain History and Cooling Rate on the Austenite Decomposition Behavior and Phase Transformation Products in a Microalloyed Steel

L. Sun, K. Muszka, B. P. Wynne, E. J. Palmiere

Publisher page

Abstract

The effect of simple strain path changes as well as post-deformation continuous cooling rate during thermomechanical-controlled processing of microalloyed steel was studied using laboratory physical simulation. The phase transformation characteristics were directly analyzed by dilatometry under various cooling rates. The microstructures of the transformation products were characterized quantitatively using EBSD. The results have shown that while strain path changes impose a considerable influence on the hot flow behavior of the austenite, the cooling rate following hot deformation is the determining factor of the phase transformation mechanism and behavior which establishes the final transformation products and subsequent mechanical properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. C. M. Sellars, Ironmaking & Steelmaking 2011, vol. 38, pp. 250-257.10.1179/030192310X12706305605817 ↗
2. C. M. Sellars, Mater. Sci. Technol. 1985, vol. 1, pp. 325-332.10.1179/mst.1985.1.4.325 ↗
3. C. M. Sellars, Mater. Sci. Technol. 1990, vol. 6, pp. 1072-1081.10.1179/mst.1990.6.11.1072 ↗
4. J. H. Beynon and C. M. Sellars, ISIJ Int. 1992, vol. 32, pp. 359-367.10.2355/isijinternational.32.359 ↗
5. L. Madej, K. Muszka, K. Perzyński, J. Majta and M. Pietrzyk, CIRP Annals - Manufacturing Technology 2011, vol. 60, pp. 291-294.10.1016/j.cirp.2011.03.137 ↗
6. A. J. McLaren and C. M. Sellars, Mater. Sci. Technol. 1992, vol. 8, pp. 1090-1094.10.1179/mst.1992.8.12.1090 ↗
7. J. H. Schmitt, E. Aernoudt and B. Baudelet, Mater. Sci. Eng. 1985, vol. 75, pp. 13-20.10.1016/0025-5416(85)90173-9 ↗
8. J. H. Schmitt, E. L. Shen and J. L. Raphanel, Int. J. Plast. 1994, vol. 10, pp. 535-551.10.1016/0749-6419(94)90013-2 ↗
9. M. Lopez-Pedrosa, B. P. Wynne and W. M. Rainforth, J. Microsc. 2006, vol. 222, pp. 97-104.10.1111/j.1365-2818.2006.01574.x ↗
10. R. Bartolomé, D. Jorge-Badiola, J. I. Astiazarán and I. Gutiérrez, Mater. Sci. Eng., A 2003, vol. 344, pp. 340-347.10.1016/S0921-5093(02)00417-3 ↗
11. D. Jorge-Badiola and I. Gutierrez, Acta Mater. 2004, vol. 52, pp. 333-341.10.1016/j.actamat.2003.09.018 ↗
12. Q. Zhu and C. M. Sellars, Scripta Mater. 2001, vol. 45, pp. 41-48.10.1016/S1359-6462(01)00989-7 ↗
13. N. Christodoulou, O. T. Woo and S. R. Macewen, Acta Metall. 1986, vol. 34, pp. 1553-1562.10.1016/0001-6160(86)90100-8 ↗
14. R. Sowerby, D. K. Uko and Y. Tomita, Mater. Sci. Eng. 1979, vol. 41, pp. 43-58.10.1016/0025-5416(79)90043-0 ↗
15. T. Hasegawa, T. Yakou and S. Karashima, Mater. Sci. Eng. 1975, vol. 20, pp. 267-276.10.1016/0025-5416(75)90159-7 ↗
16. T. Hasegawa, T. Yakou and U. F. Kocks, Mater. Sci. Eng. 1986, vol. 81, pp. 189-199.10.1016/0025-5416(86)90262-4 ↗
17. S. B. Davenport, R. L. Higginson and C. M. Sellars, Phil. Trans. R. Soc. A 1999, vol. 357, pp. 1645-1660.10.1098/rsta.1999.0394 ↗
18. J. R. Cowan, R. L. Higginson, W. B. Hutchinson and P. S. Bate, Mater. Sci. Technol. 1995, vol. 11, pp. 1104-1109.10.1179/mst.1995.11.11.1104 ↗
19. C.M. Sellars and Q. Zhu: 20th Risø International Symposium on Materials Science: Deformation-Induced Microstructures: Analysis and Relation to Properties, J.B. Bilde-Sorensen, J.V. Carstensen, N. Hansen, D. Juul Jensen, T. Leffers, W. Pantleon, O.B. Pedersen, and G. Winther, eds., Risø National Laboratory, Roskilde, Demark, 1999.
20. L. Sun, K. Muszka, B. P. Wynne and E. J. Palmiere, Scripta Mater. 2011, vol. 64, pp. 280-283.10.1016/j.scriptamat.2010.10.004 ↗
21. S. B. Davenport and R. L. Higginson, J. Mater. Process. Technol. 2000, vol. 98, pp. 267-291.10.1016/S0924-0136(99)00320-9 ↗
22. B.P. Wynne, O. Hernandez-Silva, M. Lopez-Pedrosa, and W.M. Rainforth: in Recrystallization and Grain Growth III, S.J.L. Kang, M.Y. Huh, N.M. Hwang, H. Homma, K. Ushioda, and Y. Ikuhara, eds., pp. 407–12.
23. P. Pinheiro, W. A. Monteiro, R. Barbosa and P. R. Cetlin, Mater. Sci. Eng., A 2004, vol. 368, pp. 280-285.10.1016/j.msea.2003.11.008 ↗
24. E. V. Pereloma, I. B. Timokhina and P. D. Hodgson, Mater. Sci. Eng., A 1999, vol. 273–275, pp. 448-452.10.1016/S0921-5093(99)00325-1 ↗
25. I. P. Pinheiro, R. Barbosa and P. R. Cetlin, Scripta Mater. 2005, vol. 52, pp. 639-644.10.1016/j.scriptamat.2004.11.020 ↗
26. S. E. Offerman, L. J. G. W. van Wilderen, N. H. van Dijk, J. Sietsma, M. Th Rekveldt and S. van der Zwaag, Acta Mater. 2003, vol. 51, pp. 3927-3938.10.1016/S1359-6454(03)00217-9 ↗
27. L. Sun, K. Muszka, B. P. Wynne and E. J. Palmiere, Acta Mater. 2014, vol. 66, pp. 132-149.10.1016/j.actamat.2013.11.062 ↗
28. S. B. Davenport, D. N. Hanlon and S. van der Zwaag, Scripta Mater. 2002, vol. 46, pp. 413-417.10.1016/S1359-6462(01)01256-8 ↗
29. M. Olasolo, P. Uranga, J. M. Rodriguez-Ibabe and B. López, Mater. Sci. Eng., A 2011, vol. 528, pp. 2559-2569.10.1016/j.msea.2010.11.078 ↗
30. A. Ghosh, S. Das, S. Chatterjee, B. Mishra, and P. Ramachandra Rao: Mater. Sci. Eng. A, 2003, vol. 348, pp. 299–308.10.1016/S0921-5093(02)00735-9 ↗
31. S. Shanmugam, N. K. Ramisetti, R. D. K. Misra, T. Mannering, D. Panda and S. Jansto, Mater. Sci. Eng., A 2007, vol. 460–461, pp. 335-343.10.1016/j.msea.2007.01.054 ↗
32. E. V. Pereloma and P. D. Hodgson, Mater. Sci. Eng., A 1998, vol. 251, pp. 30-39.10.1016/S0921-5093(98)00660-1 ↗
33. K. Muszka, Mater. Sci. Eng., A 2013, vol. 559, pp. 635-642.10.1016/j.msea.2012.09.003 ↗
34. L. Sun, B. P. Wynne and E. J. Palmiere, Adv. Mater. Res. 2010, vol. 89-91, pp. 721-726.10.4028/www.scientific.net/AMR.89-91.721 ↗
35. L. Sun, K. Muszka, B. P. Wynne and E. J. Palmiere, Mater. Sci. Eng., A 2013, vol. 568, pp. 160-170.10.1016/j.msea.2013.01.045 ↗
36. O. Kwon and A. J. DeArdo, Acta Metall. Mater. 1990, vol. 38, pp. 41-54.10.1016/0956-7151(90)90133-2 ↗
37. H. K. D. H. Bhadeshia, Mater. Sci. Technol. 1999, vol. 15, pp. 22-29.10.1179/026708399773002773 ↗
38. L. Sun, K. Muszka, B. P. Wynne and E. J. Palmiere, Mater. Sci. Forum 2012, vol. 715-716, pp. 667-672.10.4028/www.scientific.net/MSF.715-716.667 ↗
39. H. W. Swift, Engineering 1947, vol. 163, pp. 253-257.
40. L. S. Tóth, J. J. Jonas, P. Gilormini and B. Bacroix, Int. J. Plast. 1990, vol. 6, pp. 83-108.10.1016/0749-6419(90)90031-9 ↗
41. L. Duchêne, F. El Houdaigui and A. M. Habraken, Int. J. Plast. 2007, vol. 23, pp. 1417-1438.10.1016/j.ijplas.2007.01.008 ↗
42. L. Sun, M. J. Thomas, B. P. Wynne, E. J. Palmiere, K. P. Mingard and B. Roebuck, Mater. Sci. Technol. 2010, vol. 26, pp. 1477-1486.10.1179/026708310X12688283410280 ↗
43. H. K. D. H. Bhadeshia, Bulletin of the Polish Academy of Sciences-Technical Sciences 2010, vol. 58, pp. 255-265.
44. A. Godfrey, W. Q. Cao, N. Hansen and Q. Liu, Metall. Mater. Trans. A 2005, vol. 36A, pp. 2371-2378.10.1007/s11661-005-0109-0 ↗
45. R. Bengochea, B. Lopez and I. Gutierrez, Metall. Mater. Trans. A 1998, vol. 29, pp. 417-426.10.1007/s11661-998-0122-1 ↗
46. N. Hansen and X. Huang, Acta Mater. 1998, vol. 46, pp. 1827-1836.10.1016/S1359-6454(97)00365-0 ↗
47. S. C. Shrivastava, J. J. Jonas and G. Canova, Journal of the Mechanics and Physics of Solids 1982, vol. 30, pp. 75-90.10.1016/0022-5096(82)90014-X ↗
48. N. Hansen, X. Huang and G. Winther, Mater. Sci. Eng., A 2008, vol. 494, pp. 61-67.10.1016/j.msea.2007.10.086 ↗
49. G. Ghosh and G. B. Olson, Acta Mater. 2002, vol. 50, pp. 2655-2675.10.1016/S1359-6454(02)00096-4 ↗
50. Q. Zhu, C. M. Sellars and H. K. D. H. Bhadeshia, Mater. Sci. Technol. 2007, vol. 23, pp. 757-766.10.1179/174328407X157308 ↗
51. H. B. Yin, T. Emi and H. Shibata, ISIJ Int. 1998, vol. 38, pp. 794-801.10.2355/isijinternational.38.794 ↗
52. M. Peet and H.K.D.H. Bhadeshia: Materials Algorithms Project Program Library, 2006. http://www.msm.cam.ac.uk/map/steel/programs/mucg83.html.
53. N. Saunders, Z. Guo, X. Li, A. P. Miodownik and J. P. Schille, JOM-Journal of the Minerals Metals & Materials Society 2003, vol. 55, pp. 60-65.10.1007/s11837-003-0013-2 ↗
54. S. L. Chen, S. Daniel, F. Zhang, Y. A. Chang, X. Y. Yan, F. Y. Xie, R. Schmid-Fetzer and W. A. Oates, CALPHAD 2002, vol. 26, pp. 175-188.10.1016/S0364-5916(02)00034-2 ↗
55. J. L. Lanzagorta, D. Jorge-Badiola and I. Gutiérrez, Materials Science and Engineering: A 2010, vol. 527, pp. 934-940.10.1016/j.msea.2009.09.007 ↗