journal article·2015-11

Evaluation of Solid-Solution Hardening of Fe-27 at. pct Al by Vanadium and Comparison to Precipitation Strengthening by Vanadium Carbides

Petr Kratochvíl, Josef Pešička, Robert Král, Martin Švec, Martin Palm

Publisher page

Abstract

The compressive yield stress of Fe-27Al-xV(-C) (x = 0 to 4 at. pct) at 1073 K (800 °C) has been determined. The increase of the yield stress of Fe-Al by increasing vanadium content is explained by solid-solution hardening. The experimentally observed values of the yield stress at 1073 K (800 °C) are compared with the strengthening given by theories evaluating the interaction between solute atoms and dislocations. The experimental results fit well the increase of the yield stress by the interaction of the solute atoms with screw dislocations. Further increase in yield strength in similar alloys due to vanadium carbides is documented. Precipitated carbides were identified by transmission electron microscopy and Kikuchi patterns. Although precipitation of vanadium carbides increases the compressive yield stress, they also could result in premature failure in tension as their highly anisotropic shape may facilitate crack nucleation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Intermetallics and Advanced Alloy Properties · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. D. Hardwick and G. Wallwork: Rev. High Temp. Mater., 1978, vol.4, pp. 47–74.
2. C.G. McKamey, in Physical Metallurgy and Processing of Intermetallic Compounds, N.S. Stoloff and V.K. Sikka, eds., Chapman & Hall, New York, 1996, p. 351.10.1007/978-1-4613-1215-4_9 ↗
3. D.G. Morris and M.A. Munoz-Morris: Adv. Eng. Mater., 2011, vol. 13, pp. 43–47.10.1002/adem.201000210 ↗
4. M. Palm: Intermetallics, 2005, vol. 13, pp. 1286–1295.10.1016/j.intermet.2004.10.015 ↗
5. D.G. Morris: Intermetallics, 1998, vol. 6, pp. 753–758.10.1016/S0966-9795(98)00028-4 ↗
6. K. Vedula: in Intermetallic Compounds Vol. 2, Practice, J.H. Westbrook and R.L. Fleischer, eds., Wiley, Chichester, 1995, p. 199.
7. M.G. Mendiratta, Mat. Res. Soc. Symp. Proc., 1987, vol. 81, pp. 393–404.10.1557/PROC-81-393 ↗
8. R.L. Fleischer: in The Strengthening of Metals, D. Peckner, ed., Reinhold, New York, 1964, p. 93.
9. R. Labusch: phys. status solidi (b), 1970, vol. 41(2), pp. 659–669.10.1002/pssb.19700410221 ↗
10. Y. Nishino, C. Kumada, and S. Asano: Scripta Mater., 1997, vol. 36(4), pp. 461–466.10.1016/S1359-6462(96)00395-8 ↗
11. T. Maebashi, T. Kozakai, and M. Doi: Z. Metallkd., 2004, vol. 95(11), pp. 1005–1010.10.3139/146.018048 ↗
12. V. Raghavan: J. Phase Equilib. Diffus., 2006, vol. 27(3), pp. 283–283.10.1361/154770306X109836 ↗
13. A. Schneider, L. Falat, G. Sauthoff, and G. Frommeyer: Intermetallics, 2003, vol. 11, pp. 443–450.10.1016/S0966-9795(03)00018-9 ↗
14. L. Falat, A. Schneider, G. Sauthoff, and G. Frommeyer: Intermetallics, 2005, vol. 13(12), pp. 1256–1262.10.1016/j.intermet.2004.05.010 ↗
15. D.G. Morris and M.A. Munoz-Morris: Intermetallics, 2005, vol. 13(12), pp. 1269–1274.10.1016/j.intermet.2004.08.012 ↗
16. G. Hasemann, J.H. Schneibel, and E.P. George: Intermetallics, 2012, vol. 21(9), pp. 56–61.10.1016/j.intermet.2011.09.005 ↗
17. M. Friák, J. Deges, R. Krein, G. Frommeyer, J. Neugebauer: Intermetallics, 2010, vol. 18, pp. 1310–1315.10.1016/j.intermet.2010.02.025 ↗
18. G. Gottstein, Physical Foundations of Material Science, Springer, Berlin, 2004.10.1007/978-3-662-09291-0 ↗
19. J.M. Rosenberg and H.R. Piehler: Metal. Trans., 1971, vol. 2(1), pp. 257–259.10.1007/BF02662666 ↗
20. D.G. Morris and M.A. Munoz-Morris: Mater. Sci. Eng., 2012, vol. A552, pp. 134–144.10.1016/j.msea.2012.05.022 ↗
21. W.L. Xu, Y.S. Sun, and S.S. Ding: Acta Metall. Sin. (Engl. Lett.), 2001, vol. 14(4), pp. 248–252.