journal article·2015-09

Characterization of Plastic Flow Pertinent to the Evolution of Bulk Residual Stress in Powder-Metallurgy, Nickel-Base Superalloys

S. L. Semiatin, P. N. Fagin, R. L. Goetz, D. U. Furrer, R. E. Dutton

Publisher page

Abstract

The plastic-flow behavior which controls the formation of bulk residual stresses during final heat treatment of powder-metallurgy (PM), nickel-base superalloys was quantified using conventional (isothermal) stress-relaxation (SR) tests and a novel approach which simulates concurrent temperature and strain transients during cooling following solution treatment. The concurrent cooling/straining test involves characterization of the thermal compliance of the test sample. In turn, this information is used to program the ram-displacement-vs-time profile to impose a constant plastic strain rate during cooling. To demonstrate the efficacy of the new approach, SR tests (in both tension and compression) and concurrent cooling/tension-straining experiments were performed on two PM superalloys, LSHR and IN-100. The isothermal SR experiments were conducted at a series of temperatures between 1144 K and 1436 K (871 °C and 1163 °C) on samples that had been supersolvus solution treated and cooled slowly or rapidly to produce starting microstructures comprising coarse gamma grains and coarse or fine secondary gamma-prime precipitates, respectively. The concurrent cooling/straining tests comprised supersolvus solution treatment and various combinations of subsequent cooling rate and plastic strain rate. Comparison of flow-stress data from the SR and concurrent cooling/straining tests showed some similarities and some differences which were explained in the context of the size of the gamma-prime precipitates and the evolution of dislocation substructure. The magnitude of the effect of concurrent deformation during cooling on gamma-prime precipitation was also quantified experimentally and theoretically.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Metallurgy and Material Forming · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. M.J. Donachie, Jr., ed.: Superalloys Source Book, ASM International, Materials Park, OH, 1984.
2. G. Bunge: US Patent 6,394,793, May 2002.10.1111/j.1552-6356.2002.tb00261.x ↗
3. R.A. Wallis and P.R. Bhowal: in Superalloys 1988, S. Reichman, D.N. Duhl, G. Maurer, S. Antolovich, and C. Lund, eds., TMS, Warrendale, PA, 1988, pp. 524–34.
4. J.M. Franchet, F. Devy, P.E. Mosser, Y. Honnorat, and A. Benallal: in Superalloys 1992, S.D. Antolovich, R.W. Stusrud, R.A. MacKay, D.L. Anton, T. Khan, R.D. Kissinger, and D.L. Klarstrom, eds., TMS, Warrandale, PA, 1992, pp. 73–82.10.7449/1992/Superalloys_1992_73_82 ↗
5. D. Dye, K.T. Conlon, and R.C. Reed: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1703-1713.10.1007/s11661-004-0079-7 ↗
6. Y. Yin, W.T. Wu, S. Srivatsa, S.L. Semiatin, and J. Gayda: in Numiform 2004, S. Ghosh, J.M. Castro, and J.K. Lee, eds., American Institute of Physics, College Park, MD, 2004, pp. 400–05.
7. U. Cihak, P. Staron, M. Stockinger, and H. Clemens: Advanced Engineering Materials, 2006, vol. 8, pp. 1088-1092.10.1002/adem.200600145 ↗
8. M.A. Rist, S. Tin, B.A. Roder, J.A. James, and M.R. Daymond: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 459-467.10.1007/s11661-006-0017-y ↗
9. K. Ma, R.L. Goetz, and S.K. Srivatsa: in ASM Handbook, Vol. 22B: Metals Process Simulation, D.U. Furrer and S.L. Semiatin, eds., ASM International, Materials Park, OH, 2010, pp. 386–408.10.31399/asm.hb.v22b.a0005537 ↗
10. J.R. Newby, ed.: Metals Handbook, Volume 8: Mechanical Testing, 9th ed., American Society for Metals, Metals Park, OH, 1985.
11. G.E. Dieter, ed.: Workability Testing Techniques, American Society for Metals, Metals Park, Ohio, 1984.
12. G.E. Dieter, H.A. Kuhn, and S.L. Semiatin, eds.: Handbook of Workability and Process Design, ASM International, Materials Park, OH, 2003.
13. D. Lee and E.W. Hart: Metall. Trans., 1971, vol. 2, pp. 1245-1248.10.1007/BF02664258 ↗
14. A.M. Sabroff, F.W. Boulger, and H.J. Henning, Forging Materials and Practices, Rheinhold Book Corp., New York, 1968.
15. R.E. Bailey: Metals Eng. Quarterly, May 1975, vol. 15(5), pp. 43-50.
16. P.D. Nicolaou, R.E. Bailey, and S.L. Semiatin: in Handbook of Workability and Process Design, G.E. Dieter, H.A. Kuhn, and S.L. Semiatin, eds., ASM International, Materials Park, OH, 2003, pp. 68–85.
17. J. Gayda, T.P. Gabb, and P.T. Kantzos: in Superalloys 2004, K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, eds., TMS, Warrendale, PA, 2004, pp. 323–30.10.7449/2004/Superalloys_2004_323_329 ↗
18. J. Lemsky: Report NASA/CR-2005-213574, Ladish Company, Inc., Cudahy, WI, 2005. http://gltrs.grc.nasa.gov. Accessed 22 Jan 2009.
19. S.L. Semiatin, K. E. McClary, A.D. Rollett, C.G. Roberts, E.J. Payton, F. Zhang, and T.P. Gabb: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 1649-1661.10.1007/s11661-011-1035-y ↗
20. S.L. Semiatin, K. E. McClary, A.D. Rollett, C.G. Roberts, E.J. Payton, F. Zhang, and T.P. Gabb: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 2778-2798.10.1007/s11661-013-1675-1 ↗
21. S.L. Semiatin, J.M. Shank, A.R. Shiveley, W.M. Saurber, E.F. Gaussa, and A.L. Pilchak: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 6231-6251.10.1007/s11661-014-2572-y ↗
22. S.L. Semiatin, S.-L. Kim, F. Zhang, and J.S. Tiley: Metall. Mater. Trans. A, 2015, vol. 46A, 1419–1432.
23. S.I. Oh, S.L. Semiatin, and J.J. Jonas: Metall. Trans. A, 1992, vol. 23A, pp. 963-975.10.1007/BF02675571 ↗
24. T.P. Gabb, J. Gayda, J. Telesman, and P.T. Kantzos: Report NASA/TM-2005-213645, National Aeronautics and Space Administration, Glenn Research Center, Cleveland, OH, 2005. http://gltrs.grc.nasa.gov.
25. S.S. Manson: in Aerospace Structural Metals Handbook, Purdue Research Foundation, West Lafayette, IN, 1999, Section 4212.
26. S.L. Semiatin: Unpublished Research, Air Force Research Laboratory, Wright-Patterson Air Force Base, OH, 2014.
27. E.J. Payton: PhD Dissertation, The Ohio State University, Columbus, OH, 2009.
28. M.S.A. Karunaratne, D.C. Cox, P. Carter, and R.C. Reed: in Superalloys 2000, T.M. Pollock, R.D. Kissinger, R.R. Bowman, K.A. Green, M. McLean, S. Olson, and J.J. Schirra, eds., TMS, Warrandale, PA, 2000, pp. 263–72.10.7449/2000/Superalloys_2000_263_272 ↗
29. R.W. Kozar, A. Suzuki, W.W. Milligan, J.J. Schirra, M.F. Savage, and T.M. Pollock: Metall. Mater. Trans. A, 2009, vol. 40, pp. 1588-1603.10.1007/s11661-009-9858-5 ↗
30. S.L. Semiatin, D.S. Weaver, P.N. Fagin, M.G. Glavicic, R.L. Goetz, N.D. Frey, R.C. Kramb, and M.M. Antony: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 679-693.10.1007/s11661-004-0379-y ↗
31. W. Huther and B. Reppich: Z. fur Metallkunde, 1978, vol. 69, pp. 628-634.
32. R.C. Reed: The Superalloys: Fundamentals and Applications, Cambridge University Press, Cambridge, UK, 2006.10.1017/CBO9780511541285 ↗
33. I. Weiss and J.J. Jonas: Metall. Trans. A, 1979, vol. 10A, pp. 831-840.10.1007/BF02658301 ↗
34. J. Mao, K.-M. Chang, and D. Furrer: in Superalloys 2000, T.M. Pollock, R.D. Kissinger, R.R. Bowman, K.A. Green, M. McLean, S. Olson, and J.J. Schirra, eds., TMS, Warrandale, PA, 2000, pp. 109–16.10.7449/2000/Superalloys_2000_109_116 ↗