Quantitative description of damage evolution in ductile fracture of tantalum
Source abstract
Abstract
Dynamic ductile fracture has been studied through incipient spallation experiments on two grades of tantalum. A commercially pure Ta material incipiently spalled at 252 m/s, a highly pure Ta material incipiently spalled at 246 m/s, and a highly pure Ta material preshocked at 250 m/s and incipiently spalled at 246 m/s were used. Microstructural parameters of the fracture process such as porosity, void-size distributions, and void aspect ratios have been quantified using image analysis and optical profilometry techniques. The commercially pure Ta, the highly pure Ta preshocked prior to spall, and the annealed high-purity Ta exhibited 27, 16.6, and 5.5 pct porosity, respectively. The void-size distribution observed in all three tests was adequately represented by either a log-normal or a linear combination of a log-normal and a Weibull distribution function. At least 80 pct of the aspect ratios observed in all three tests were adequately represented by a gamma distribution function.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Microstructure and mechanical properties · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. G. LeRoy, J.D. Embury, G. Edwards, and M.F. Ashby: Acta Metall., 1981, vol. 29, pp. 1509–22.10.1016/0001-6160(81)90185-1 ↗
2. H.G.F. Wilsdorf: Mater. Sci. Eng., 1983, vol. 59, pp. 1–39.10.1016/0025-5416(83)90085-X ↗
3. D.R. Curran, L. Seaman, and D.A. Shockey: Phys. Rep., 1987, vol. 147, pp. 253–388.10.1016/0370-1573(87)90049-4 ↗
4. P.F. Thomason: Ductile Fracture of Metals, Pergamon Press, Oxford, United Kingdom, 1990.
5. A.S. Argon, J. Im, and R. Safoglu: Metall. Trans. A, 1975, vol. 6A, pp. 825–37.10.1007/BF02672306 ↗
6. A.S. Argon and J. Im: Metall. Trans. A, 1975, vol. 6A, pp. 839–51.10.1007/BF02672307 ↗
7. S. Christy, H.R. Pak, and M.A. Meyers: Metallurgical Applications of Shock-Wave and High Strain-Rate Phenomena, L.E. Murr, K.P. Staudhammer, and M.A. Meyers, eds., Marcel Dekker, New York, NY, 1986, pp. 835–63.
8. A.K. Zurek and M.A. Meyers: High-Pressure Shock Compression of Solids II, L. Davison, D.E. Grady, and M. Shahinpoor, eds., Springer-Verlag, New York, NY, 1996, pp. 25–70.10.1007/978-1-4612-2320-7_2 ↗
9. L. Seaman, D.R. Curran, and D.A. Shockey: J. Appl. Phys., 1976, vol. 47, pp. 4814–26.10.1063/1.322523 ↗
10. J.N. Johnson: J. Appl. Phys., 1981, vol. 52, pp. 2812–25.10.1063/1.329011 ↗
11. J.N. Johnson and F.L. Addessio: J. Appl. Phys., 1988, vol. 64, pp. 6699–6712.10.1063/1.342000 ↗
12. A.L. Gurson: J. Eng. Mater. Tech., 1977, vol. 99, pp. 2–15.10.1115/1.3443401 ↗
13. A. Needleman and V. Tvergaard: Eng. Fract. Mech., 1991, vol. 38, pp. 157–73.10.1016/0013-7944(91)90079-G ↗
14. P.F. Thomason: Fat. Fract. Eng. Mater. Struct., 1998, vol. 21, pp. 1105–22.10.1046/j.1460-2695.1998.00077.x ↗
15. M.A. Meyers: Dynamic Behavior of Materials, John Wiley & Sons, Inc., New York, NY, 1994.10.1002/9780470172278 ↗
16. A.K. Zurek, J.N. Johnson, and C.E. Frantz: J. Phys., 1988, vol. 49, pp. 269–76.10.1051/jphys:01988004902026900 ↗
17. D.R. Curran, L. Seaman, and D.A. Shockey: Phys. Today, 1977, pp. 46–55.10.1063/1.3037367 ↗
18. L. Seaman, D.R. Curran, and R.C. Crewdson: J. Appl. Phys., 1978, vol. 49, pp. 5221–29.10.1063/1.324419 ↗
19. M. Lacomme, A. Froger, J.P. Ansart, and R. Dormeval: J. Phys., 1988, vol. 49, pp. 183–90.
20. A.K. Zurek, W.R. Thissell, J.N. Johnson, D.L. Tonks, and R.S. Hixson: J. Mater. Processing Technol., 1996, vol. 60, pp. 261–67.10.1016/0924-0136(96)02340-0 ↗
21. D.L. Tonks: J. Phys. IV, 1994, vol. 4, pp. 665–70.
22. D.L. Tonks, A.K. Zurek, and W.R. Thissell: Metallurgical and Materials Applications of Shock-Wave and High-Strain-Rate Phenomena, L.E. Murr, K.P. Staudhammer, and M.A. Meyers, eds., Elsevier Science, Amsterdam, 1995, pp. 171–78.
23. D.L. Tonks, W.R. Thissell, A.K. Zurek, and R.S. Hixson: J. Phys. IV, 1997, vol. 7, pp. 841–46.
24. J.N. Johnson, R.S. Hixson, D.L. Tonks, and A.K. Zurek: Shock Compression of Condensed Matter, S.C. Schmidt and W.C. Tao, eds., AIP, New York, NY, 1995, pp. 523–26.
25. J.M. Rivas, A.K. Zurek, W.R. Thissell, D.L. Tonks, and R.S. Hixson: Electron Microscopy 1998, Proc. 14th Int. Congr. on Electron Microscopy, H.A. Calderon Benavides and M. Jose Yacaman, eds., Institute of Physics Publishing, Bristol, 1998, vol. 1, pp. 169–70.
26. G.T. Gray III and K.S. Vecchio: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2555–64.
27. S.R. Chen and G.T. Gray III: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2994–3006.10.1007/BF02663849 ↗
28. G.T. Gray III: High Pressure Shock Compression of Solids, J.R. Asay and M. Shahinpoor, eds., Springer-Verlag, New York, NY, 1993, pp. 187–215.
29. L.M. Barker and R.E. Hollenbach: J. Appl. Phys., 1972, vol. 43, pp. 4669–75.10.1063/1.1660986 ↗
30. A.M. Kelly, S.R. Bingert, and R.D. Reiswig: Microstr. Sci., 1996, vol. 23, pp. 185–95.
31. P.J. Caber: Appl. Optics, 1993, vol. 32, pp. 3438–41.10.1364/AO.32.003438 ↗
32. A.K. Zurek, W.R. Thissell, D.L. Tonks, R. Hixson, and F. Addessio: J. Phys. IV, 1997, vol. 7, pp. 903–08.
33. W.R. Thissell, A.K. Zurek, D.L. Tonks, and R.S. Hixson: 21st Int. Symp. on Shock Waves, Great Keppel Island, Australia, 1997.
34. B. Cavalieri: Geometria Planara, 1653.
35. G.J. Hahn and S.S. Shapiro: Statistical Models in Engineering, John Wiley & Sons, Inc., New York, NY, 1994.
36. W.R. Thissell, A.K. Zurek, J.M. Rivas, D.L. Tonks, and R.S. Hixson: Microstructural Science, Vol. 26, E. Abramovici, D.O. Northwood, and M.T. Shehata, eds., ASM International, Materials Park, OH, 1999, pp. 497–505.