Characterization of Anodic Films Produced on Anodized AA1050 Aluminum Alloy: Effect of Bio-additive
Source abstract
Abstract
In this study, AA1050 aluminum alloy samples were anodized in sulfuric acid baths containing different amounts of environmentally friendly bio-additive (eggshell particles). The morphological, chemical, and structural characteristics of the resulting films were investigated using scanning electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray diffraction techniques, respectively. Wear and corrosion resistance of the coatings were evaluated by pin-on-disk and potentiodynamic polarization tests, respectively. The results showed that amorphous films containing less amount of sulfur would be deposited as the concentration of eggshell particles in bath increases. Moreover, coatings with more surface roughness values containing fewer microcracks would be produced in baths containing more eggshell particles. In addition, thicker films with more corrosion and wear resistance values were produced in baths including higher concentrations of eggshell particles. Those samples that were anodized in baths containing eggshell particles exhibited more corrosion and wear resistance in comparison to conventionally anodized ones.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Anodic Oxide Films and Nanostructures · Corrosion Behavior and Inhibition · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Y. Yürektürk, F. Muhaffel, M. Baydoğanab: Surf. Coat. Technol, 2015, vol. 269, pp. 83–90.10.1016/j.surfcoat.2014.12.058 ↗
2. M. Tang, W. Li, H. Liu, L. Zhu: Surf. Coat. Technol, 2011, vol. 205, pp. 4135–4140.10.1016/j.surfcoat.2011.02.061 ↗
3. J. Wang, S. Huang, H. Huang, M. He, P. Wangyang, L. Gu: J. Alloys Compd, 2018, vol. 777, pp. 94-101.10.1016/j.jallcom.2018.10.374 ↗
4. Z. Ding, B.A. Smith, R.R. Hebert, W. Zhang, M.R. Jaworowski: Surf. Coat. Technol, 2018, vol. 350, pp. 31-3910.1016/j.surfcoat.2018.07.008 ↗
5. Ž. Bogdanov, M. Milić, N. Popović, T. Nenadovi’c, D. Peruško: Vacuum, 1990, vol. 40, pp. 153–156.10.1016/0042-207X(90)90143-M ↗
6. S. Yu, L. Wang, C. Wu, T. Feng, Y. Cheng, Z. Bu, S. Zhu: J. Alloys Compd, 2020, vol. 817, pp. 153257.10.1016/j.jallcom.2019.153257 ↗
7. Y. Huang, H. Shih, H. Huang, J. Daugherty, S. Wu, S. Ramanathan, C. Chang, F. Mansfeld: Corros. Sci, 2008, vol. 50, pp. 3569–3575.10.1016/j.corsci.2008.09.008 ↗
8. G.C. Wood, J.P. O’Sullivan: Electrochim. Acta, 1970, vol. 15, pp. 1865-1876.10.1016/0013-4686(70)85024-1 ↗
9. S. Ono, N. Masuko: Surf. Coat. Technol, 2003, vol.169-170, pp. 139–142.10.1016/S0257-8972(03)00197-X ↗
10. M. Ghrib, R. Ouertani, M. Gaidi, N. Khedher, M.B. Salem, H. Ezzaouia: Appl. Surf. Sci, 2012, vol. 258, pp. 4995–5000.10.1016/j.apsusc.2011.12.056 ↗
11. S.S.A. Rehim, H.H. Hassan, M.A. Amin: J. Appl. Electrochem, 2002, vol. 32, pp. 1257-1264.10.1023/A:1021662814303 ↗
12. H. Aghili, B. Hashemi, M.E. Bahrololoom, S. Jenabali Jahromi: Process. Appl. Ceram, 2019, vol. 13, pp. 235-243.10.2298/PAC1903235A ↗
13. Q. Xu, H. Sun, Y. Yang, L. Liu, Z. Li: Appl. Surf. Sci, 2011, vol. 258, pp. 1826–1830.10.1016/j.apsusc.2011.10.054 ↗
14. G.D. Sulka, W.J. Stepniowski: Electrochim. Act, 2009, vol. 54, pp. 3683–3691.10.1016/j.electacta.2009.01.046 ↗
15. W.J. Stępniowski, M. Norek, M. Michalska-Domańska, A. Bombalska, A. Nowak-Stępniowska, Mi, Kwaśny, Z. Bojar: Appl. Surf. Sci, 2012, vol. 259, pp. 324–33010.1016/j.apsusc.2012.07.043 ↗
16. D. Elabar, A. Nemcová, T. Hashimoto, P. Skeldon, G.E. Thompson: Corros. Sci, 2015, vol. 100, pp.377–385.10.1016/j.corsci.2015.08.019 ↗
17. R.C. Spooner: J. Electrochem. Soc, 1955, vol. 102, pp. 156-162.10.1149/1.2430017 ↗
18. V. Moutarlier, S. Pelletier, F. Lallemand, M.P. Gigandet, Z. Mekhalif: Appl. Surf. Sci, 2005, vol. 252, pp. 1739–1746.10.1016/j.apsusc.2005.03.124 ↗
19. A. Jagminas, M. Kurtinaitienė, R. Angelucci, G. Valinčius: Appl. Surf. Sci, 2006, vol. 252, pp. 2360–2367.10.1016/j.apsusc.2005.04.007 ↗
20. Y. Shang, L. Wang, D. Niu, Z. Liu, Y. Wang, C. Liu: Int. J. Electrochem. Sci, 2016, vol. 11, pp. 1549–1557.10.1016/S1452-3981(23)15940-2 ↗
21. I. Mohammadi, A. Afshar, S. Ahmadi: Ceram. Int, 2016, vol. 42, pp. 12105-12114.10.1016/j.ceramint.2016.04.142 ↗
22. S. Chen, C. Kang, J. Wang, C. Liu, K. Sun: Appl. Surf. Sci, 2010, vol. 256, pp. 6518–652510.1016/j.apsusc.2010.04.040 ↗
23. M. Chen, K. Kao, M. Tu, D. Zhang: J. Adv. Mater. Res, 2012, vol. 495, pp. 3511–3515.10.4028/www.scientific.net/AMR.490-495.3511 ↗
24. V. Balasubramanian, S. John, B.A. Shenoi: Surf. Technol, 1983, vol. 19, pp. 293–303.10.1016/0376-4583(83)90034-1 ↗
25. Q.Z. Li, Y. Zuo, J.M. Zhao, Y.M. Tang, X.H. Zhao, J.P. Xiong: Anti-Corros. Methods Mater, 2010, vol. 57, pp. 2–9.
26. M. M. Rahman, A. N. Netravali, B. J. Tiimob, and V. K. Rangari: ACS Sustain. Chem. Eng, 2014, vol. 2, pp. 2329–2337.10.1021/sc5003193 ↗
27. N. Mohamad-Jafar, T. Abubakar, C.Y. Chong, N.H. Ahmad: J. SSp, 2017, vol. 264, pp. 190–193.10.4028/www.scientific.net/SSP.264.190 ↗
28. M M. Albini, P. Letardi, L. Mathys, L. Brambilla, J. Schröter, P. Junier, E. Joseph: Corros. Sci, 2018, vol. 143, pp. 84-92.10.1016/j.corsci.2018.08.020 ↗
29. M. H. Nazari, X. Shi, E. Jackson, Y. Zhang and Y. Li: J. Mater. Civil Eng, 2017, vol. 29, 04016187.10.1061/(ASCE)MT.1943-5533.0001727 ↗
30. M. Kharshan, A. Furman, K. Gillette, R. Kean: US Patent 8,409,340 Bl, 2013.
31. T. Kikuchi, T. Yamamoto, S. Natsui, R.O. Suzuki: Electrochim. Acta, 2014, vol. 123, pp. 14–22.10.1016/j.electacta.2013.12.186 ↗
32. ASTM Standard, G99, Standard test method for wear testing with a pin-on-disk apparatus, ASTM International, West Conshohocken, PA, 2006.
33. ASTM Standard: E384-16 Standard test method for microindentation hardness of materials, ASTM Standard: West Conshohocken, 2016.
34. K. Morshed-Behbahani, P. Najafisayar, M. Pakshir, N. Zakerin: Corros. Eng. Sci. Technol, 2019, vol. 54, pp. 174–183.10.1080/1478422X.2018.1556865 ↗
35. K. Morshed-Behbahani, P. Najafisayar, M. Pakshir: Iran. J. Chem. Chem. Eng, 2018, vol. 37, pp. 117–127.
36. ASTM Standard, G102, Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements, ASTM International, ASTM West Conshohocke, 2010.
37. I.M. Putra, I.G. Widhiantara: J. Nat. B, 2015, vol. 3, pp. 143-14910.21776/ub.natural-b.2015.003.02.7 ↗
38. T. Rosenqvist, Principles of Extractive Metallurgy, 2nd ed., Tapir Academic Press, New York, 2004, pp. 227.
39. B. Gastón-García, E. García-Lecina, J.A. Díez, M. Belenguer, C. Müller: Solid-State Lett, (2010) 13, pp. C33–C3510.1149/1.3478482 ↗
40. T. Aerts, I. De Graeve, H. Terryn: Electrochim. Acta, 2008, vol. 54, pp. 270–279.10.1016/j.electacta.2008.08.004 ↗
41. T. Aerts, I. De Graeve, H. Terryn: Surf. Coat. Technol, 2010, vol. 204, 2754–2760.10.1016/j.surfcoat.2010.02.031 ↗
42. J.J .Roa, B. Gastón-García, E. García-Lecina, C.Müller: Ceram. Int, 2012, vol. 38, pp. 1627–1633.10.1016/j.ceramint.2011.09.053 ↗
43. T. Liang, X. Yang, X. Fan, Y. Wang, C. Zhao: Appl. Mech. Mater, 2014, vol. 691, pp. 4277–4282.10.4028/www.scientific.net/AMM.687-691.4277 ↗
44. R. Elaish, M. Curioni, K. Gowers, A. Kasuga, H. Habazaki, T. Hashimoto, P. Skeldon: Surf. Coat. Technol, 2018, vol. 342, pp. 233-243.10.1016/j.surfcoat.2018.02.096 ↗
45. L. Bouchama, N. Azzouz, N. Boukmouche, J.P. Chopart, A.L. Daltin, Y. Bouznit: Surf. Coat. Technol, 2013, vol. 235, pp. 676-684.10.1016/j.surfcoat.2013.08.046 ↗
46. M. Michalska-doma, M. Norek, W.J. Stępniowski, B. Budner: Electrochim. Acta, 2013, vol. 105, pp. 424– 432.10.1016/j.electacta.2013.04.160 ↗
47. S-J. Lee, S-J. Kim: J. Korean Inst. Surf. Eng, 2016, vol. 49, pp.125–129.10.5695/JKISE.2016.49.2.125 ↗
48. M. Ghrib, R. Ouertani, M. Gaidi, N. Khedher, M.B. Salem, H. Ezzaouia: Appl. Surf. Sci, 2012, vol. 258, pp. 4995–5000.10.1016/j.apsusc.2011.12.056 ↗
49. M. Chiang, C. Yeh, C. Lee: Wear, 2020, vol. 442-443, pp. 20313710.1016/j.wear.2019.203137 ↗
50. A. Toulabifard, A. Hakimizad, F. Di Franco, K. Raeissi, M. Santamaria: Mater. Res. Express, 2019, vol. 6, pp. 106502.10.1088/2053-1591/ab3630 ↗
51. W. Jiang, S. Zhu, S. Wang: P. I. Mech. Eng. J. J. Eng., 2019, vol. 0, pp. 1–12 (in press)
52. M. Guezmil, W. Bensalah, A. Khalladi, K. Elleuch, M.D. Wery, H.F. Ayedi: Int. Sch. Res. Notices, 2014, pp. 910.1155/2014/795745 ↗
53. M. Guezmil, W. Bensalah, A. Khalladi, K. Elleuch, H.F. Ayedi: Trans. Nonferrous Met. Soc. China, 2015, vol. 25, pp. 1950–1960.10.1016/S1003-6326(15)63803-1 ↗
54. P. Marcus: Corrosion mechanisms in theory and practice, 3rd ed, CRC Press, Boca Raton, 2011, pp. 395–418
55. M. Naghizadeh, D. Nakhaie, M. Zakeri, M.H. Moayed: J. Electrochem. Soc, 2015, vol. 162, 71–7710.1149/2.0861501jes ↗
56. N.J. Laycock: Corros, 1999, vol. 55, pp. 590–595.10.5006/1.3280500 ↗
57. C. Pan, Y. Song, W. Jin, Z. Qin, S. Song, W. Hu, D.H. Xia: Trans. Tianjin Univ, 2020, vol. 26, pp. 135–141.10.1007/s12209-020-00238-8 ↗