Solution Annealing of Super Duplex Stainless Steel: Correlating Corrosion Performance with Grain Size and Phase-Specific Chemistry
Source abstract
Abstract
A super duplex stainless steel was subjected to solution annealing at 1323 K. This led to grain coarsening, ‘limited’ (~ 7 pct by area) austenite-to-ferrite phase transformation and changes in phase-specific chemistry. No changes in the phase boundary nature or galvanic coupling between phases were, however, noted. The general corrosion behavior was determined by the electrochemical performance of the individual phases. The corrosion performance of the ferrite phase degraded monotonically with annealing time. This was related to a combined effect of grain coarsening and dilution in alloying (chromium and molybdenum content) elements. Corrosion of the austenite phase was, however, non-monotonic: as the effects of grain coarsening was counter-balanced, at least during the initial stages of annealing, by relative molybdenum enrichment. This study thus provided clear experimental data relating phase-specific corrosion performance with annealing induced changes in grain size and local chemistry in a super duplex stainless steel.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (86)
Show source-provided references
1. R. N. Gunn: Duplex stainless steels: microstructure, properties and applications, Woodhead Publishing, Sawston 1997.10.1533/9781845698775 ↗
2. I. M. Association: Practical guidelines for the fabrication of duplex stainless steel [M/OL]. The International Molybdenum Association, London, 2009.
3. P. Antony, R.S. Raman, P. Kumar, R. Raman: Metall. Mater. Trans. A, 2008, vol. 39, pp. 2689-2697.10.1007/s11661-008-9626-y ↗
4. J. O. Nilsson: Mater. Sci. Technol., 1992, vol. 8, pp. 685-700.10.1179/mst.1992.8.8.685 ↗
5. M. Okayasu, D. Ishida: Metall. Mater. Trans. A, 2019, vol. 50, pp. 1380-1388.10.1007/s11661-018-5083-4 ↗
6. J. Charles: Steel Research Int., 2008, vol. 79, pp. 455-465.10.1002/srin.200806153 ↗
7. S. K. Ghosh, D. Mahata, R. Roychaudhuri, R. Mondal: Bulletin of Materials Science, 2012, vol. 35, pp. 839-846..10.1007/s12034-012-0353-z ↗
8. B Deng, YM Jiang, J Gao and J Li: Journal of Alloys and Compounds 2010, vol. 493, pp. 461-464.10.1016/j.jallcom.2009.12.127 ↗
9. S.C. De Rezende, M.E.R. Cronemberger, R. Silva, C.A.D. Rovere, S.E. Kuri, L.L. de Sousa, N.A. Mariano: Materials Science Forum, Trans Tech Publ, 2018, vol. 930, pp 374–79.10.4028/www.scientific.net/MSF.930.374 ↗
10. Z. Cvijović, G. Radenković: Corros. Sci., 2006, vol. 48, pp. 3887-3906.10.1016/j.corsci.2006.04.003 ↗
11. M. Gholami, M. Hoseinpoor, M.H. Moayed: Corros. Sci., 2015, vol. 94, pp. 156-164.10.1016/j.corsci.2015.01.054 ↗
12. J.J. Kim, Y.M. Young: Int. J. Electrochem. Sci 2013, vol. 8, pp. 11847-11859.10.1016/S1452-3981(23)13227-5 ↗
13. M.H. Dean, U. Stimming: Corros. Sci., 1989, vol. 29, pp. 199-211.10.1016/0010-938X(89)90030-9 ↗
14. N. Sato: J. Electrochem. Soc., 1982, vol. 129, pp. 255-260.10.1149/1.2123808 ↗
15. J. O. Nilsson, P. Kangas, A. Wilson, T. Karlsson: M Metall. Mater. Trans. A, 2000, vol. 31, pp. 35-45.10.1007/s11661-000-0050-1 ↗
16. Malta PO, Condé BL, Assumpção RF, Perasoli DB, Sicupira DC, Santos DB: Metall. Mater. Trans. A, 2019, vol 6, pp. 2665-2677.10.1007/s11661-019-05193-1 ↗
17. M. Naghizadeh, M.H. Moayed: Corros. Sci., 2015, vol. 94, pp. 179-189.10.1016/j.corsci.2015.01.051 ↗
18. L. Zhang, W. Zhang, Y. Jiang, B. Deng, D. Sun, J. Li: Electrochim. Acta. 2009, vol. 54, pp. 5387-5392.10.1016/j.electacta.2009.04.023 ↗
19. H. Tan, Z. Wang, Y. Jiang, D. Han, J. Hong, L. Chen, L. Jiang, J. Li: Corros. Sci., 2011, vol. 53, pp. 2191-2200.10.1016/j.corsci.2011.02.041 ↗
20. S.H. Jeon, S.T. Kim, S.Y. Kim, M. S. Choi, Y.S. Park: Mater. Trans., 2013, pp. M2012402.
21. J. Lv, T. Liang, C. Wang, L. Dong: J. Electroanal. Chem., 2015, vol. 757, pp. 263-269.10.1016/j.jelechem.2015.09.036 ↗
22. L. Jinlong, L. Tongxiang, W. Chen, and D. Limin: Mat. Sci. Eng.: C, 2016, vol. 62, pp. 558-563.10.1016/j.msec.2016.02.008 ↗
23. H. Sarlak, M. Atapour, M. Esmailzadeh: Materials & Design (1980–2015), 2015, vol. 66, pp. 209-216.10.1016/j.matdes.2014.10.060 ↗
24. K. Ralston, N. Birbilis: Corrosion, 2010, vol. 66, pp. 075005-075013.10.5006/1.3462912 ↗
25. J. Lv, H. Luo: J. Nucl. Mater., 2014, vol. 452, pp. 469-473.10.1016/j.jnucmat.2014.05.041 ↗
26. C. O. A. Olsson: Corros. Sci., 1995, vol. 37, pp. 467-479.10.1016/0010-938X(94)00148-Y ↗
27. I. Olefjord, B. Brox, U. Jelvestam: J. Electrochem. Soc., 1985, vol. 132, pp. 2854-2861.10.1149/1.2113683 ↗
28. L. Wegrelius, F. Falkenberg: J. Electrochem. Soc., 1999, vol. 146, pp. 1397-1406.10.1149/1.1391777 ↗
29. M. Ameer, A. Fekry, F. E. T. Heakal: Electrochim. Acta, 2004, vol. 50, pp. 43-49.10.1016/j.electacta.2004.07.011 ↗
30. H. Y. Ha, T. H. Lee, J. H. Bae, D. Chun: Metals, 2018, vol. 8, p. 653.10.3390/met8080653 ↗
31. G. Ilevbare, G. Burstein: Corros. Sci., 2001, vol. 43, pp. 485-513.10.1016/S0010-938X(00)00086-X ↗
32. A. Pardo, M. Merino, A. Coy, F. Viejo, R. Arrabal, E. Matykina: Corros. Sci., 2008, vol. 50, pp. 1796-1806.10.1016/j.corsci.2008.04.005 ↗
33. L. Jinlong, W. Zhuqing, L. Tongxiang, S. Ken, M. Hideo: Results in physics, 2017, vol. 7, pp. 3459-3464.10.1016/j.rinp.2017.09.001 ↗
34. T. Mesquita, E. Chauveau, M. Mantel, N. Kinsman, V. Roche, R. Nogueira: Mater. Chem. Phys., 2012, vol. 132, pp. 967-972.10.1016/j.matchemphys.2011.12.042 ↗
35. H. Tian, X. Cheng, Y. Wang, C. Dong, X. Li: Electrochim. Acta, 2018, vol. 267, pp. 255-268.10.1016/j.electacta.2018.02.082 ↗
36. H. Ogawa, H. Omata, I. Itoh, H. Okada: Corrosion, 1978, vol. 34, pp. 52-60.10.5006/0010-9312-34.2.52 ↗
37. ASTM Standards G5-14ε1, Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements, 2018, pp. 01–09.
38. W. T. Tsai, J. R. Chen: Corros. Sci., 2007, vol. 49, pp. 3659-3668.10.1016/j.corsci.2007.03.035 ↗
39. R. Mondal, S.K. Bonagani, A. Lodh, T. Sharma, P.V. Sivaprasad, G. Chai, V. Kain, and I. Samajdar: Corrosion, 2019, vol. 75, pp. 1315-1326..10.5006/3091 ↗
40. A. Bautista, S. Alvarez, F. Velasco, Mater. Corros., 2015, vol. 66, pp. 347-356.10.1002/maco.201307419 ↗
41. T. Bellezze, G. Giuliani, A. Viceré, G. Roventi: Corros. Sci., 2018, vol. 130, pp. 12-21.10.1016/j.corsci.2017.10.010 ↗
42. X. Cheng, Y. Wang, C. Dong, X. Li: Corros. Sci., 2018, vol. 134, pp. 122-130.10.1016/j.corsci.2018.02.033 ↗
43. H. Hwang, G. Lee, S. Jeon, Y. Park: Mater. Trans., 2009, vol. 50, pp. 1214-1218.10.2320/matertrans.MER2008182 ↗
44. J. S. Lee, K. Fushimi, T. Nakanishi, Y. Hasegawa, Y. S. Park: Corros. Sci., 2014, vol. 89, pp. 111-117.10.1016/j.corsci.2014.08.014 ↗
45. I. H. Lo, Y. Fu, C. J. Lin, W. T. Tsai: Corros. Sci., 2006, vol. 48, pp. 696-708.10.1016/j.corsci.2005.02.004 ↗
46. X. Cheng, Y. Wang, X. Li, C. Dong: J. Mater. Sci. Technol., 2018.
47. M.E. Orazem, B. Tribollet: Electrochemical Impedance Spectroscopy, Wiley, New York, 2017.10.1002/9781119363682 ↗
48. H. Luo, C. Dong, K. Xiao, X. Li: Appl. Surf Sci., 2011, vol. 258, pp. 631-639.10.1016/j.apsusc.2011.06.077 ↗
49. K. Darowicki, S. Krakowiak, P. Ślepski: Electrochim. Acta, 2006, vol. 51, pp. 2204-2208.10.1016/j.electacta.2005.04.079 ↗
50. I. Nicic, D.D. Macdonald: J. Nucl. Mater., 2008, vol. 379, pp. 54-58.10.1016/j.jnucmat.2008.06.014 ↗
51. R. Jiang, C. Chen, S. Zheng: Electrochim. Acta, 2010, vol. 55, pp. 2498-2504.10.1016/j.electacta.2009.11.093 ↗
52. N. Sato: Corros. Sci. 1990, vol. 31, pp. 1-19.10.1016/0010-938X(90)90086-K ↗
53. N. Srinivasan, V. Kain, N. Birbilis, B.S. Kumar, M. Gandhi, P. Sivaprasad, G. Chai, A. Lodh, P. Ahmedabadi, I. Samajdar: Corros. Sci., 2016, vol. 111, pp. 404-413.10.1016/j.corsci.2016.05.027 ↗
54. N.T. McDevitt, W.L. Baun: Spectrochim. Acta, 1964, vol. 20, pp. 799-808.10.1016/0371-1951(64)80079-5 ↗
55. N. Srinivasan, B.S. Kumar, V. Kain, N. Birbilis, S. Joshi, P. Sivaprasad, G. Chai, A. Durgaprasad, S. Bhattacharya, I. Samajdar: Metall. Mater. Trans. A, 2018, vol. 49, pp. 2281-2292.10.1007/s11661-018-4598-z ↗
56. J. O. Andersson, T. Helander, L. Höglund, P. Shi, B. Sundman: Calphad, 2002, vol. 26, pp. 273-312.10.1016/S0364-5916(02)00037-8 ↗
57. L. Morais, R. Magnabosco: Calphad, 2017, vol. 58, pp. 214-218.10.1016/j.calphad.2017.07.006 ↗
58. S. Wessman, R. Pettersson: Steel Res. Int., 2015, vol. 86, pp. 1339-1349.10.1002/srin.201400277 ↗
59. J. Pospiech, K. Sztwiertnia, F. Haessner: The Misorientation Distribution Function, Texture, Stress and Microstructure, 1986, vol. 6, pp. 201-215.10.1155/TSM.6.201 ↗
60. V. Randle, O. Engler: Introduction to texture analysis: macrotexture, microtexture and orientation mapping, CRC Press, Boca Raton, 2014.
61. M. Miodownik, A. Godfrey, E. Holm, D. Hughes: Acta Mater., 1999, vol. 47, pp. 2661-2668.10.1016/S1359-6454(99)00137-8 ↗
62. P.J. Goodhew, J. Humphreys, R. Beanland: Electron microscopy and analysis, CRC Press, Boca Raton, 2014.
63. S. Atamert, J. King: Acta Metall. Mater., 1991, vol. 39, pp. 273-285.10.1016/0956-7151(91)90306-L ↗
64. H. Vannevik, J. O. Nilsson, J. Frodigh, P. Kangas: ISIJ Int., 1996, vol. 36, pp. 807-812.10.2355/isijinternational.36.807 ↗
65. L. Weber, P. Uggowitzer: Mater. Sci. Eng. A, 1998, vol. 242, pp. 222-229.10.1016/S0921-5093(97)00521-2 ↗
66. M. H. Jang, J. Moon, T. H. Lee, S. J. Park, H.N. Han: Metall. Mater. Trans. A, 2014, vol. 45, pp. 1653-1658.10.1007/s11661-014-2210-8 ↗
67. A. Mandal, S. Patra, D. Chakrabarti, S.B. Singh: Metall. Mater. Trans. A, 2017, vol. 48, pp. 5960-5977.10.1007/s11661-017-4345-x ↗
68. N. Pettersson, S. Wessman, S. Hertzman, A. Studer: Metall. Mater. Trans. A, 2017, vol. 48, pp. 1562-1571.10.1007/s11661-016-3953-1 ↗
69. E. McCafferty: Corros. Sci., 2005, vol. 47, pp. 3202-3215.10.1016/j.corsci.2005.05.046 ↗
70. K. Morshed-Behbahani, P. Najafisayar, M. Pakshir, N. Zakerin: Corrosion Engineering, Science and Technology, 2019, vol.54, pp. 174-183.10.1080/1478422X.2018.1556865 ↗
71. M. Ebrahimi, I. Danaee, H. Eskandari, S. Nikmanesh: IJISSI, 2017, vol. 14, pp. 9-15.
72. M. Carmezim, A. Simoes, M. Montemor, M.D.C. Belo: Corros. Sci., 2005, vol. 47, pp. 581-591.10.1016/j.corsci.2004.07.002 ↗
73. X. Cheng, Y. Wang, X. Li, C. Dong: J. Mater. Sci. Technol., 2018, vol. 34, pp. 2140 -2148.10.1016/j.jmst.2018.02.020 ↗
74. Z. Wang, L. Zhang, X. Tang, Z.Y. Cui, J. P. Xue, M. X. Lu: Int. J. Min. Met. Mater., 2017, vol. 24, pp. 943-953.10.1007/s12613-017-1482-6 ↗
75. H. M. Cobb: The history of stainless steel, ASM International, Cleveland, 2010.10.31399/asm.tb.hss.9781627083560 ↗
76. B. Leffler: STAINLESS—Stainless Steels and Their Properties, 1998, vol. 45. https://www.outokumpu.com/files/group/hr/documents/stainless20.pdf.
77. L. Guo, M. Li, X.L. Shi, Y. Yan, X. Li, L. Qiao: Corros. Sci., 2011, vol. 53, pp. 3733-3741.10.1016/j.corsci.2011.07.019 ↗
78. P.O. Malta, B.L. Condé, R.F. Assumpção, D.B. Perasoli, D.C. Sicupira, D.B. Santos: Metall. Mater. Trans. A, 2019, vol. 50, pp. 2665-2677.10.1007/s11661-019-05193-1 ↗
79. E. Symniotis: Corrosion, 1990, vol. 46, pp. 2-12.10.5006/1.3585062 ↗
80. M. Femenia: Corrosion Behavior of Duplex Stainless Steels in Acidic-Chloride Solutions Studied with Micrometer Resolution. Royal Institute of Technology, Stockholm, 2003.
81. X. Wang, D. Li: Electrochimica Acta, 2002, vol. 47, pp. 3939-3947.10.1016/S0013-4686(02)00365-1 ↗
82. A. Di Schino, J. Kenny: J. Mater. Sci. Lett., 2002, vol. 21, pp. 1631-1634.10.1023/A:1020338103964 ↗
83. K. Sugimoto, Y. Sawada: Corros. Sci., 1977, vol. 17, pp. 425-445.10.1016/0010-938X(77)90032-4 ↗
84. K. Hashimoto, K. Asami, K. Teramoto: Corros. Sci., 1979, vol. 19, pp. 3-14.10.1016/0010-938X(79)90003-9 ↗
85. K. Hashimoto, K. Asami, A. Kawashima, H. Habazaki, E. Akiyama: Corros. Sci., 2007, vol. 49, pp. 42-52.10.1016/j.corsci.2006.05.003 ↗
86. E. Rahimi, A. Kosari, S. Hosseinpou, A. Davoodi, H. Zandbergen, J.M. Mol: Applied Surface Science, 2019, vol 496, p. 143634.10.1016/j.apsusc.2019.143634 ↗