Microstructure and Texture Evolution During Thermomechanical Processing of Al0.25CoCrFeNi High-Entropy Alloy
Source abstract
Abstract
Microstructure and texture evolution was studied in a Al0.25CoCrFeNi high-entropy alloy after cold work and subsequent isochronal annealing treatments. The alloy was synthesized by arc-melting and the resulting ingots were cold rolled up to two different thickness reductions: 50 pct and 80 pct. The alloy was then annealed for 1 hour at 973 K, 1073 K, 1173 K, and 1273 K. The final microstructures were analyzed using X-ray diffraction, scanning electron microscopy, and electron backscatter diffraction and the results were correlated with hardness measurements. The sample reduced by 80 pct recrystallized at a lower temperature than the sample reduced by 50 pct, confirming the influence of the deformation degree on the rate of nucleation and growth of new grains. The recrystallized microstructures revealed equiaxed grains with a high density of twins, which is typical of metals with low stacking fault energy. Twins were also observed in the as-rolled samples, suggesting that twinning precedes shear banding during deformation of this alloy. This accounts for the strength of the {110} 〈112〉 brass texture component in the cold rolled samples.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. J.W. Yeh, S.K. Chen, S.J. Lin, J.Y. Gan, T.S. Chin, T.T. Shun, C.H. Tsau, and S.Y. Chang: Adv. Eng. Mater., 2004, vol. 6, pp. 299–303+274.10.1002/adem.200300567 ↗
2. B. Cantor, I.T.H. Chang, P. Knight, and A.J.B. Vincent: Mater. Sci. Eng. A, 2004, vol. 375–377, pp. 213–8.10.1016/j.msea.2003.10.257 ↗
3. G. Laplanche, O. Horst, F. Otto, G. Eggeler, and E.P. George: J. Alloys Compd., 2015, vol. 647, pp. 548–57.10.1016/j.jallcom.2015.05.129 ↗
4. F. Otto, N.L. Hanold, and E.P. George: Intermetallics, 2014, vol. 54, pp. 39–48.10.1016/j.intermet.2014.05.014 ↗
5. K. Liu, M. Komarasamy, B. Gwalani, S. Shukla, and R.S. Mishra: Scr. Mater., 2019, vol. 158, pp. 116–20.10.1016/j.scriptamat.2018.08.048 ↗
6. L.T.H. De Jeer, V. Ocelík, and J.T.M. De Hosson: Microsc. Microanal., 2017, vol. 23, pp. 905–15.10.1017/S1431927617012442 ↗
7. H. Shiratori, T. Fujieda, K. Yamanaka, Y. Koizumi, K. Kuwabara, T. Kato, and A. Chiba: Mater. Sci. Eng. A, 2016, vol. 656, pp. 39–46.10.1016/j.msea.2016.01.019 ↗
8. A. Takeuchi, K. Amiya, T. Wada, K. Yubuta, and W. Zhang: Jom, 2014, vol. 66, pp. 1984–92.10.1007/s11837-014-1085-x ↗
9. C.E. Slone, S. Chakraborty, J. Miao, E.P. George, M.J. Mills, and S.R. Niezgoda: Acta Mater., 2018, vol. 158, pp. 38–52.10.1016/j.actamat.2018.07.028 ↗
10. D.B. Miracle and O.N. Senkov: Acta Mater., 2017, vol. 122, pp. 448–511.10.1016/j.actamat.2016.08.081 ↗
11. C. Huang, Y. Zhang, J. Shen, and R. Vilar: Surf. Coatings Technol., 2011, vol. 206, pp. 1389–95.10.1016/j.surfcoat.2011.08.063 ↗
12. B. Schuh, F. Mendez-Martin, B. Völker, E.P. George, H. Clemens, R. Pippan, and A. Hohenwarter: Acta Mater., 2015, vol. 96, pp. 258–68.10.1016/j.actamat.2015.06.025 ↗
13. K. Zhang and Z. Fu: Intermetallics, 2012, vol. 22, pp. 24–32.10.1016/j.intermet.2011.10.010 ↗
14. Z. Li, K.G. Pradeep, Y. Deng, D. Raabe, and C.C. Tasan: Nature, 2016, vol. 534, pp. 227–30.10.1038/nature17981 ↗
15. C.J. Tong, M.R. Chen, S.K. Chen, J.W. Yeh, T.T. Shun, S.J. Lin, and S.Y. Chang: Metall. Mater. Trans. A, 2005, vol. 36, pp. 1263–71.10.1007/s11661-005-0218-9 ↗
16. C.P. Lee, C.C. Chang, Y.Y. Chen, J.W. Yeh, and H.C. Shih: Corros. Sci., 2008, vol. 50, pp. 2053–60.10.1016/j.corsci.2008.04.011 ↗
17. K.Y. Tsai, M.H. Tsai, and J.W. Yeh: Acta Mater., 2013, vol. 61, pp. 4887–97.10.1016/j.actamat.2013.04.058 ↗
18. J. Chen, X. Zhou, W. Wang, B. Liu, Y. Lv, W. Yang, D. Xu, and Y. Liu: J. Alloys Compd., 2018, vol. 760, pp. 15–30.10.1016/j.jallcom.2018.05.067 ↗
19. C. Ng, S. Guo, J. Luan, S. Shi, and C.T. Liu: Intermetallics, 2012, vol. 31, pp. 165–72.10.1016/j.intermet.2012.07.001 ↗
20. P.P. Bhattacharjee, G.D. Sathiaraj, M. Zaid, J.R. Gatti, C. Lee, C.W. Tsai, and J.W. Yeh: J. Alloys Compd., 2014, vol. 587, pp. 544–52.10.1016/j.jallcom.2013.10.237 ↗
21. J. Joseph, T. Jarvis, X. Wu, N. Stanford, P. Hodgson, and D. Mark: Mater. Sci. Eng. A, 2015, vol. 633, pp. 184–93.10.1016/j.msea.2015.02.072 ↗
22. Y.F. Kao, S.K. Chen, T.J. Chen, P.C. Chu, J.W. Yeh, and S.J. Lin: J. Alloys Compd., 2011, vol. 509, pp. 1607–14.10.1016/j.jallcom.2010.10.210 ↗
23. S.G. Ma, P.K. Liaw, M.C. Gao, J.W. Qiao, Z.H. Wang, and Y. Zhang: J. Alloys Compd., 2014, vol. 604, pp. 331–9.10.1016/j.jallcom.2014.03.050 ↗
24. H.P. Chou, Y.S. Chang, S.K. Chen, and J.W. Yeh: Mater. Sci. Eng. B, 2009, vol. 163, pp. 184–89.10.1016/j.mseb.2009.05.024 ↗
25. N. Haghdadi, T. Guo, A. Ghaderi, P.D. Hodgson, M.R. Barnett, and D.M. Fabijanic: Wear, 2019, vol. 428–429, pp. 293–301.10.1016/j.wear.2019.03.026 ↗
26. M. Annasamy, N. Haghdadi, A. Taylor, P. Hodgson, and D. Fabijanic: Mater. Sci. Eng. A, 2019, vol. 745, pp. 90–106.10.1016/j.msea.2018.12.102 ↗
27. Y. Shi, L. Collins, R. Feng, C. Zhang, N. Balke, P.K. Liaw, and B. Yang: Corros. Sci., 2018, vol. 133, pp. 120–31.10.1016/j.corsci.2018.01.030 ↗
28. Y. Shi, L. Collins, N. Balke, P.K. Liaw, and B. Yang: Appl. Surf. Sci., 2018, vol. 439, pp. 533–44.10.1016/j.apsusc.2018.01.047 ↗
29. S. Huang, W. Li, S. Lu, F. Tian, J. Shen, E. Holmström, and L. Vitos: Scr. Mater., 2015, vol. 108, pp. 44–7.10.1016/j.scriptamat.2015.05.041 ↗
30. I.S. Wani, T. Bhattacharjee, S. Sheikh, I.T. Clark, M.H. Park, T. Okawa, S. Guo, P.P. Bhattacharjee, and N. Tsuji: Intermetallics, 2017, vol. 84, pp. 42–51.10.1016/j.intermet.2016.12.018 ↗
31. N.D. Stepanov, D.G. Shaysultanov, N.Y. Yurchenko, S. V. Zherebtsov, A.N. Ladygin, G.A. Salishchev, and M.A. Tikhonovsky: Mater. Sci. Eng. A, 2015, vol. 636, pp. 188–95.10.1016/j.msea.2015.03.097 ↗
32. S. Singh, Y. Guo, B. Winiarski, T.L. Burnett, P.J. Withers, and M. De Graef: Sci. Rep., 2018, vol. 8, pp. 1–8.10.1038/s41598-017-17765-5 ↗
33. J. Hou, M. Zhang, S. Ma, P.K. Liaw, Y. Zhang, and J. Qiao: Mater. Sci. Eng. A, 2017, vol. 707, pp. 593–601.10.1016/j.msea.2017.09.089 ↗
34. S. Chen, X. Xie, W. Li, R. Feng, B. Chen, J. Qiao, Y. Ren, Y. Zhang, K.A. Dahmen, and P.K. Liaw: Mater. Chem. Phys., 2017, vol. 210, pp. 20–8.10.1016/j.matchemphys.2017.09.004 ↗
35. T. Guo, J. Li, J. Wang, W.Y. Wang, Y. Liu, X. Luo, H. Kou, and E. Beaugnon: Mater. Sci. Eng. A, 2018, vol. 729, pp. 141–8.10.1016/j.msea.2018.05.054 ↗
36. R. Abbaschian and R.E. Reed-Hill: Physical Metallurgy Principles Fourth Edition, Fouth Edit., Stamford, 2008.
37. U.F. Kocks: in Unified Constitutive Equations for Creep and Plasticity, Springer Netherlands, Dordrecht, 1987, pp. 1–88.10.1007/978-94-009-3439-9_1 ↗
38. F. Adcock: J Inst Met., 1922, vol. 27, pp. 73–92.
39. N. Jia, P. Eisenlohr, F. Roters, D. Raabe, and X. Zhao: Acta Mater., 2012, vol. 60, pp. 3415–34.10.1016/j.actamat.2012.03.005 ↗
40. Y. Jin, B. Lin, M. Bernacki, G.S. Rohrer, A.D. Rollett, and N. Bozzolo: Mater. Sci. Eng. A, 2014, vol. 597, pp. 295–303.10.1016/j.msea.2014.01.018 ↗
41. H. Paul, J.H. Driver, C. Maurice, and A. Piatkowski: Acta Mater., 2007, vol. 55, pp. 575–88.10.1016/j.actamat.2006.08.051 ↗
42. P.G. Callahan and M. De Graef: Microsc. Microanal., 2013, vol. 19, pp. 1255–65.10.1017/S1431927613001840 ↗
43. S. Singh, F. Ram, and M. De Graef: J. Appl. Crystallogr., 2017, vol. 50, pp. 1664–76.10.1107/S1600576717014200 ↗
44. Y.H. Chen, S.U. Park, D. Wei, G. Newstadt, M.A. Jackson, J.P. Simmons, M. De Graef, and A.O. Hero: Microsc. Microanal., 2015, vol. 21, pp. 739–52.10.1017/S1431927615000756 ↗
45. F. Ram, S. Wright, S. Singh, and M. De Graef: Ultramicroscopy, 2017, vol. 181, pp. 17–26.10.1016/j.ultramic.2017.04.016 ↗
46. K. Marquardt, M. De Graef, S. Singh, H. Marquardt, A. Rosenthal, and S. Koizuimi: Am. Mineral., 2017, vol. 102, pp. 1843–55.10.2138/am-2017-6062 ↗