Enhanced Mechanical and Magnetic Properties of [(Fe0.9Ni0.1)77Mo5P9C7.5B1.5]99.9Cu0.1 Bulk Metallic Glass by Partial Annealing
Source abstract
Abstract
In the present study, the microstructural and phase evolutions of [(Fe0.9Ni0.1)77Mo5P9C7.5B1.5]99.9Cu0.1 bulk metallic glass (BMG) were investigated during partial annealing process to improve its mechanical and magnetic properties. Phase analysis showed that some crystallites including FeNi2P, γ-Fe, α-Fe, and Fe3C were formed during various stages of annealing process. Formation of these nanocrystallites changed hardness of the investigated BMG during the annealing process. Furthermore, in order to investigate the effect of partial crystallization on mechanical behavior of the investigated BMG, the “indentation test” was used to determine the ductility changes. Moreover, the effect of partial annealing on the magnetic properties of this BMG was investigated.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Magnetic Properties of Alloys · Electromagnetic wave absorption materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (83)
Show source-provided references
1. P. Gong, K.F. Yao, and Y. Shao: J. Alloys Compd., 2012, vol. 536, pp. 26–9.10.1016/j.jallcom.2012.04.048 ↗
2. S.F. Guo, N. Li, C. Zhang, and L. Liu: J. Alloys Compd., 2010, vol. 504, pp. S78–S81.10.1016/j.jallcom.2010.02.058 ↗
3. P. Li, G. Wang, D. Ding, and J. Shen: Mater. Des., 2014, vol. 53, pp. 145–51.10.1016/j.matdes.2013.06.060 ↗
4. W.H. Wang, M.X. Pan, D.Q. Zhao, Y. Hu, and H.Y. Bai: J. Phys. Condens. Matter, 2004, vol. 16, pp. 3719–23.10.1088/0953-8984/16/21/020 ↗
5. W.H. Wang: Adv. Mater., 2009, vol. 21, pp. 4524–44.10.1002/adma.200901053 ↗
6. C.L. Qin, W. Zhang, K. Asami, H. Kimura, X.M. Wang, and A. Inoue: Acta Mater., 2006, vol. 54, pp. 3713–19.10.1016/j.actamat.2006.04.005 ↗
7. M.M. Trexler and N.N. Thadhani: Prog. Mater. Sci., 2010, vol. 55, pp. 759–839.10.1016/j.pmatsci.2010.04.002 ↗
8. A. Lenain, J.J. Blandin, G. Kapelski, F. Volpi, and S. Gravier: Mater. Des., 2018, vol. 139, pp. 467–72.10.1016/j.matdes.2017.11.030 ↗
9. S. Jilani and F.A. Khalid: Mater. Sci. Eng. A, 2016, vol. 663, pp. 17–20.10.1016/j.msea.2016.03.109 ↗
10. X. Chen, H. Niu, D. Li, and Y. Li: Intermetallics, 2011, vol. 19, pp. 1275–81.10.1016/j.intermet.2011.03.026 ↗
11. X.P. Li, M.P. Roberts, S. O’Keeffe, and T.B. Sercombe: Mater. Des., 2016, vol. 112, pp. 217–26.10.1016/j.matdes.2016.09.071 ↗
12. W.H. Wang, C. Dong, and C.H. Shek: Mater. Sci. Eng. R Reports, 2004, vol. 44, pp. 45–90.10.1016/j.mser.2004.03.001 ↗
13. X. Jia, Y. Li, H. Wang, G. Xie, S. Yamaura, and W. Zhang: Phys. B Condens. Matter, 2015, vol. 476, pp. 141–46.10.1016/j.physb.2015.08.049 ↗
14. F.J. Liu, K.F. Yao, and H.Y. Ding: Intermetallics, 2011, vol. 19, pp. 1674–7.10.1016/j.intermet.2011.07.011 ↗
15. T. Qi, Y. Li, A. Takeuchi, G. Xie, H. Miao, and W. Zhang: Intermetallics, 2015, vol. 66, pp. 8–12.10.1016/j.intermet.2015.06.015 ↗
16. O. Larsson: Master’s Theses and Master’s Reports, 2013.
17. Y. Naitoh, T. Bitoh, T. Hatanai, A. Makino, and A. Inoue: J. Appl. Phys., 1998, vol. 83, pp. 6332–34.10.1063/1.367991 ↗
18. M. Shi, Z. Liu, and T. Zhang: J. Magn. Magn. Mater., 2015, vol. 378, pp. 417–23.10.1016/j.jmmm.2014.10.144 ↗
19. C. Suryanarayana and A. Inoue: Int. Mater. Rev., 2013, vol. 58, pp. 131–66.10.1179/1743280412Y.0000000007 ↗
20. L. Zhang, X. Ma, Q. Li, J. Zhang, Y. Dong, and C. Chang: J. Alloys Compd., 2014, vol. 608, pp. 79–84.10.1016/j.jallcom.2014.04.114 ↗
21. M. Ansariniya, A. Seifoddini, and S. Hasani: J. Alloys Compd., 2018, vol. 763, pp. 606–12.10.1016/j.jallcom.2018.05.360 ↗
22. Z.Q. Liu, H. Wang, and T. Zhang: Intermetallics, 2014, vol. 45, pp. 24–8.10.1016/j.intermet.2013.09.013 ↗
23. G. Zhang, Q. Wang, C. Yuan, W. Yang, J. Zhou, L. Xue, F. Hu, B. Sun, and B. Shen: J. Alloys Compd., 2018, vol. 737, pp. 815–20.10.1016/j.jallcom.2017.12.176 ↗
24. Y.B. Wang, D.D. Qu, X.H. Wang, Y. Cao, X.Z. Liao, M. Kawasaki, S.P. Ringer, Z.W. Shan, T.G. Langdon, and J. Shen: Acta Mater., 2012, vol. 60, pp. 253–60.10.1016/j.actamat.2011.09.026 ↗
25. J. Wu, W. Li, Y. Pan, J. Qi, and J. Wang: Mater. Des., 2016, vol. 89, pp. 1130–6.10.1016/j.matdes.2015.10.054 ↗
26. A. Seifoddini, M. Stoica, M. Nili-Ahmadabadi, S. Heshmati-Manesh, U. Kühn, and J. Eckert: Mater. Sci. Eng. A, 2013, vol. 560, pp. 575–82.10.1016/j.msea.2012.09.104 ↗
27. M. Askari-paykani, M. Nili-ahmadabadi, and A. Seiffodini: Intermetallics, 2014, vol. 46, pp. 118–25.10.1016/j.intermet.2013.11.014 ↗
28. X. Li, H. Kato, K. Yubuta, A. Makino, and A. Inoue: Mater. Sci. Eng. A, 2010, vol. 527, pp. 2598–602.10.1016/j.msea.2009.12.026 ↗
29. W. Yang, H. Liu, Y. Zhao, A. Inoue, K. Jiang, J. Huo, H. Ling, Q. Li, and B. Shen: Sci. Rep., 2014, vol. 4, p. 6233.10.1038/srep06233 ↗
30. N. Chen, L. Martin, D. V. Luzguine-Luzgin, and A. Inoue: Materials (Basel)., 2010, vol. 3, pp. 5320–39.10.3390/ma3125320 ↗
31. P. Rezaei-Shahreza, A. Seifoddini, and S. Hasani: Thermochim. Acta, 2017, vol. 652, pp. 119–25.10.1016/j.tca.2017.03.017 ↗
32. K. Chen, H.M. Yang, J.S. Gao, X.L. Li, C.G. Yu, G.X. Ma, and X. Yuan: J. Alloys Compd., 2016, vol. 687, pp. 174–8.10.1016/j.jallcom.2016.06.107 ↗
33. J.T. Zhang, W.M. Wang, H.J. Ma, G.H. Li, R. Li, and Z.H. Zhang: Thermochim. Acta, 2010, vol. 505, pp. 41–6.10.1016/j.tca.2010.03.023 ↗
34. K.K. Song, X.L. Han, S. Pauly, Y.S. Qin, K. Kosiba, C.X. Peng, J.H. Gong, P.X. Chen, L. Wang, B. Sarac, S. Ketov, M. Mühlbacher, F. Spieckermann, I. Kaban, and J. Eckert: Mater. Des., 2018, vol. 139, pp. 132–40.10.1016/j.matdes.2017.11.008 ↗
35. P. Rezaei-Shahreza, A. Seifoddini, and S. Hasani: J. Non. Cryst. Solids, 2017, vol. 471, pp. 286–94.10.1016/j.jnoncrysol.2017.05.044 ↗
36. P. Rezaei-Shahreza, A. Seifoddini, and S. Hasani: J. Alloys Compd., 2018, vol. 738, pp. 197–205.10.1016/j.jallcom.2017.12.135 ↗
37. V. Keryvin, V.H. Hoang, and J. Shen: Intermetallics, 2010, vol. 18, p. 748.10.1016/j.intermet.2009.12.001 ↗
38. T. Xu, R. Li, R. Xiao, G. Liu, J. Wang, and T. Zhang: 2015, vol. 626, pp. 16–26.
39. Q. Liu, J. Mo, H. Liu, L. Xue, L. Hou, W. Yang, L. Dou, B. Shen, and L. Dou: J. Non. Cryst. Solids, 2016, vol. 443, pp. 108–11.10.1016/j.jnoncrysol.2016.04.010 ↗
40. M. Zuo, S. Meng, Q. Li, H. Li, and C. Chang: Intermetallics, 2017, vol. 83, pp. 83–6.10.1016/j.intermet.2016.12.010 ↗
41. J. Si, C. Du, T. Wang, Y. Wu, R. Wang, and X. Hui: J. Alloys Compd., 2018, vol. 741, pp. 542–8.10.1016/j.jallcom.2018.01.074 ↗
42. Z. Jaafari, A. Seifoddoni, S. Hasani, and P. Rezaei-Shahreza: Therm. Anal. Calorim., 2018, vol. 134, pp. 1565–74.10.1007/s10973-018-7372-y ↗
43. J.H. Han, N. Mattern, D.H. Kim, and J. Eckert: J. Alloys Compd., 2011, vol. 509, pp. S42–5.10.1016/j.jallcom.2010.12.210 ↗
44. L. Zhou, N. Wang, L. Zhang, and W.J. Yao: J. Alloys Compd., 2013, vol. 555, pp. 88–94.10.1016/j.jallcom.2012.12.034 ↗
45. A. Seiffodini and S. Zaremehrjardi: J. Non. Cryst. Solids, 2016, vol. 432, pp. 313–8.10.1016/j.jnoncrysol.2015.10.023 ↗
46. H. Miyazaki, H. Hyuga, K. Hirao, and T. Ohji: J. Eur. Ceram. Soc., 2007, vol. 27, pp. 2347–54.10.1016/j.jeurceramsoc.2006.09.002 ↗
47. X. Liu, S. Chen, M. Li, and X. Wang: Thin Solid Films, 2007, vol. 515, pp. 6744–8.10.1016/j.tsf.2007.02.004 ↗
48. T. Nose and T. Fujii: J. Am. Ceram. Soc., 1988, vol. 71, pp. 328–33.10.1111/j.1151-2916.1988.tb05049.x ↗
49. P. Vullo and M.J. Davis: J. Non. Cryst. Solids, 2004, vol. 349, pp. 180–4.10.1016/j.jnoncrysol.2004.08.181 ↗
50. J. Wang, X.H. Zheng, and R. Stevens: J. Mater. Sci., 1992, vol. 27, pp. 5348–56.10.1007/BF02403843 ↗
51. R.W. Rice: J. Mater. Sci., 1996, vol. 31, pp. 4503–19.10.1007/BF00366346 ↗
52. A. Mejias, D. Chicot, A. Pertuz, A. Iost, A. Montagne, and P. Cadenas: Surf. Coatings Technol., 2018, vol. 334, pp. 410–9.10.1016/j.surfcoat.2017.11.011 ↗
53. G. Quinn, J. Salem, I. Bar-On, K. Cho, M. Foley, and H. Fang: J. Res. NIST, 1992, vol. 97, pp. 579–607.10.6028/jres.097.026 ↗
54. H.W. Zhang, G. Subhash, X.N. Jing, L.J. Kecskes, and R.J. Dowding: Philos. Mag. Lett., 2006, vol. 86, pp. 333–45.10.1080/09500830600788935 ↗
55. C. Schuh and T.. Nieh: Acta Mater., 2003, vol. 51, pp. 87–99.10.1016/S1359-6454(02)00303-8 ↗
56. J.G. Wang, B.W. Choi, T.G. Nieh, and C.T. Liu: J. Mater. Res., 2000, vol. 15, pp. 913–22.10.1557/JMR.2000.0130 ↗
57. Y.I. Golovin, V.I. Ivolgin, V.A. Khonik, K. Kitagawa, and A.. Tyurin: Scr. Mater., 2001, vol. 45, pp. 947–52.10.1016/S1359-6462(01)01116-2 ↗
58. H. Zhang: Master’s Theses and Master’s Reports, 2006.
59. V. Keryvin, R. Crosnier, R. Laniel, V.H. Hoang, and J.-C. Sanglebœuf: J. Phys. D. Appl. Phys., 2008, vol. 41, p. 074029.10.1088/0022-3727/41/7/074029 ↗
60. D. Ćorić, L. Ćurković, and M. Majić Renjo: Trans. FAMENA, 2017, vol. 41, pp. 1–16.10.21278/TOF.41201 ↗
61. A. Şakar-Deliormanli and M. Güden: J. Biomed. Mater. Res. Part B Appl. Biomater., 2006, vol. 76B, pp. 257–64.10.1002/jbm.b.30371 ↗
62. C. Jin and K. Plucknett: Int. J. Refract. Met. Hard Mater., 2016, vol. 61, pp. 151–61.10.1016/j.ijrmhm.2016.09.006 ↗
63. N.H. Faisal, R. Ahmed, A.K. Prathuru, S. Spence, M. Hossain, and J.A. Steel: Eng. Fract. Mech., 2014, vol. 128, pp. 189–204.10.1016/j.engfracmech.2014.07.015 ↗
64. G.R. Anstis, P. Chantikul, B.R. Lawn, and D.B. Marshall: J. Am. Ceram. Soc., 1981, vol. 64, pp. 533–38.10.1111/j.1151-2916.1981.tb10320.x ↗
65. K. Niihara, R. Morena, and D.P.H. Hasselman: J. Mater. Sci. Lett., 1982, vol. 1, pp. 13–16.10.1007/BF00724706 ↗
66. S. Hasani, P. Rezaei-Shahreza, A. Seifoddini, and M. Hakimi: J. Non. Cryst. Solids, 2018, vol. 497, pp. 40–47.10.1016/j.jnoncrysol.2018.05.021 ↗
67. A. Takeuchi and A. Inoue: Mater. Trans., 2005, vol. 46, pp. 2817–29.10.2320/matertrans.46.2817 ↗
68. J.E. Gao, H.X. Li, Z.B. Jiao, Y. Wu, Y.H. Chen, T. Yu, and Z.P. Lu: Appl. Phys. Lett., 2011, vol. 99, p. 052504.10.1063/1.3621832 ↗
69. S. Zameer Abbas, F. Ahmad Khalid, and H. Zaigham: J. Non. Cryst. Solids, 2017, vol. 457, pp. 86–92.10.1016/j.jnoncrysol.2016.11.022 ↗
70. A. Inoue, T. Zhang, S. Ishihara, J. Saida, and M. Matsushita: Scr. Mater., 2001, vol. 44, pp. 1615–19.10.1016/S1359-6462(01)00784-9 ↗
71. J. Eckert, U. Kühn, N. Mattern, A. Reger-Leonhard, and M. Heilmair: Scr. Mater., 2001, vol. 44, pp. 1587–90.10.1016/S1359-6462(01)00779-5 ↗
72. C. Fan, C. Li, A. Inoue, and V. Haas: Phys. Rev. B, 2000, vol. B61, p. R3761.10.1103/PhysRevB.61.R3761 ↗
73. A.L. Greer: Mater. Sci. Eng. A, 2001, vol. 304–306, pp. 68–72.10.1016/S0921-5093(00)01449-0 ↗
74. Z.C. Zhong, X.Y. Jiang, and A.L. Greer: Philos. Mag. B, 1997, vol. B76, pp. 505–10.10.1080/01418639708241116 ↗
75. T. Gloriant: J. Non. Cryst. Solids, 2003, vol. 316, pp. 96–103.10.1016/S0022-3093(02)01941-5 ↗
76. M. Ferry, K.J. Laws, C. White, D.M. Miskovic, K.F. Shamlaye, W. Xu, and O. Biletska: MRS Commun., 2013, vol. 3, pp. 1–12.10.1557/mrc.2012.32 ↗
77. E.S. Park: Appl. Microsc., 2015, vol. 45, pp. 63–73.10.9729/AM.2015.45.2.63 ↗
78. Y.H. Kim, K. Hiraga, A. Inoue, T. Masumoto, and H.H. Jo: Mater. Trans. JIM, 1994, vol. 35, pp. 293–302.10.2320/matertrans1989.35.293 ↗
79. A.M. Glezer, N.A. Shurygina, S.G. Zaichenko, and I.E. Permyakova: Russ. Metall., 2013, vol. 2013, pp. 235–44.10.1134/S0036029513040022 ↗
80. A.M. Glezer, I.E. Permyakova, and S.E. Manaenkov: Bull. Russ. Acad. Sci. Phys., 2008, vol. 72, pp. 1265–66.10.3103/S1062873808090268 ↗
81. P. Jia, E. Wang, and K. Han: Materials (Basel)., 2016, vol. 9, p. 899.10.3390/ma9110899 ↗
82. S. Hasani, M. Shamanian, A. Shafyei, P. Behjati, M. Nezakat, M. Fathi-Moghaddam, and J.A. Szpunar: J. Magn. Magn. Mater., 2015, vol. 378, pp. 253–60.10.1016/j.jmmm.2014.11.050 ↗
83. S. Hasani, M. Shamanian, A. Shafyei, P. Behjati, J.A. Szpunar, and M. Fathi-Moghaddam: Mater. Sci. Eng. B, 2014, vol. 190, pp. 96–103.10.1016/j.mseb.2014.09.013 ↗