Two-Dimensional Multiparticle Finite Element Modeling on the Cold Isostatic Pressing of Al Powder
Source abstract
Abstract
In this article, the cold isostatic pressing (CIP) of Al powders with different initial packing structures was numerically simulated in two dimensions using the multiparticle finite element method from particulate scale. The effects of external pressure and initial packing structures on the packing densification and performance of the compacts were systematically studied. Various macro/micro properties (such as relative density and distribution, local stress and distribution, and particle deformation behavior) and the densification dynamics/mechanisms were characterized and analyzed. Corresponding modeling on die compaction was also conducted for comparison. The results show that the relative displacement of particles is much less and the particle shape is more regular for CIP of ordered initial packing structure than those for CIP of random initial packing structure, and the distributions of relative density and local stress in the compact for the former case are more homogeneous. Compared with die compaction, the formability of CIP is much better; also, the compact has higher relative density and more uniform density and stress distributions. The normal stresses are transmitted in all directions in the compact during CIP because the external load is applied uniformly to the outer surface of the rubber mold from all directions in the entire process, while the normal stresses are directional along the loading path during die compaction.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Powder Metallurgy Techniques and Materials · Advanced materials and composites · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. F.V. Lenel: Powder Metallurgy (Principles and Applications), Metal Powder Industries Federation, Princeton, NJ, 1980.
2. M.G. Randall: Powder Metallurgy Science, Metal Powder Industries Federation, Princeton, NJ, 1994.
3. M. Okumiya, H. Abe, and M. Naito: J. Soc. Powder Technol. Jpn., 2009, vol. 46, pp. 532–40.10.4164/sptj.46.532 ↗
4. S. Tanaka, C.C. Pin, and K. Uematsu: J. Am. Ceram. Soc., 2006, vol. 89, pp. 1903–07.10.1111/j.1551-2916.2006.01057.x ↗
5. R.W. Lewis, A.G.K. Jinka, and D.T. Gethin: Powder Metall. Int., 1993, vol. 25, pp. 287–93.
6. P.R. Brewin, O. Coube, P. Doremus, and J.H. Tweed: Modelling of Powder Die Compaction, Springer-Verlag London Limited, London, 2008, pp. 131–49.
7. C.L. Martin: J. Mech. Phys. Solids, 2004, vol. 52, pp. 1691–1717.10.1016/j.jmps.2004.03.004 ↗
8. P.J. James: Isostatic Pressing Technology, Applied Science Publishers, Barking, England, 1983.
9. R.M. Govindarajan and N. Aravas: Int. J. Mech. Sci., 1994, vol. 36, pp. 343–57.10.1016/0020-7403(94)90040-X ↗
10. C.S. Lin and S.T. Lin: J. Mater. Process. Technol., 2008, vol. 201, pp. 657–61.10.1016/j.jmatprotec.2007.11.159 ↗
11. O.C. Gamboni, C. Riul, R. Billardon, W.W.B. Filho, N. Schmitt, and R.B. Canto: Polymer, 2016, vol. 82, pp. 75–86.10.1016/j.polymer.2015.11.014 ↗
12. C.D. Turner and M.F. Ashby: Acta Mater., 1996, vol. 44, pp. 4521–30.10.1016/1359-6454(96)00064-X ↗
13. M. Andasmas, P. Langlois, N. Fagnon, T. Chauveau, A. Hendaoui, and D. Vrel: Powder Technol., 2011, vol. 207, pp. 304–10.10.1016/j.powtec.2010.10.031 ↗
14. Y.I. Cho, H. Kamiya, Y. Suzuki, M. Horio, and H. Suzuki: J. Eur. Ceram. Soc., 1998, vol. 18, pp. 261–68.10.1016/S0955-2219(97)00112-X ↗
15. PM Modnet Research Group: Powder Metall., 2002, vol. 4, pp. 335–44.10.1179/003258902225007078 ↗
16. R.J. Henderson, H.W. Chandler, A.R. Akisanya, H. Barber, and B. Moriarty: J. Eur. Ceram. Soc., 2000, vol. 20, pp. 1121–28.10.1016/S0955-2219(99)00280-0 ↗
17. H.G. Kim, J.W. Lee, and K.T. Kim: Mater. Sci. Eng. A, 2001, vol. 318, pp. 174–82.10.1016/S0921-5093(01)01328-4 ↗
18. M. Reiterer, T. Kraft, U Janosovits, and H. Riedel: Ceram. Int., 2004, vol. 30, pp. 177–83.10.1016/S0272-8842(03)00086-5 ↗
19. S.C. Lee and K.T. Kim: Mater. Sci. Eng. A, 2008, vol. 498, pp. 359–68.10.1016/j.msea.2008.08.020 ↗
20. K.T. Kim and H.T. Lee: Int. J. Mech. Sci., 1998, vol. 40, pp. 507–19.10.1016/S0020-7403(97)00063-5 ↗
21. C. PavanaChand and R. KrishnaKumar: Scripta Mater., 1996, vol. 35, pp. 767–74.10.1016/1359-6462(96)00216-3 ↗
22. K.H. Lee, J.M. Lee, and B.M. Kim: Trans. Nonferrous Met. Soc., 2009, vol. 19, pp. 68–75.10.1016/S1003-6326(10)60247-6 ↗
23. J. Zhang: Compos. Sci. Technol., 2009, vol. 69, pp. 2048–53.10.1016/j.compscitech.2008.11.020 ↗
24. Y.X. Zhang, X.Z. An, and Y.L. Zhang: Appl. Phys. A, 2015, vol. 118, pp. 1015–21.10.1007/s00339-014-8861-x ↗
25. F. Huang, X.Z. An, Y.X. Zhang, and A.B. Yu: Powder Technol., 2017, vol. 314, pp. 39–48.10.1016/j.powtec.2017.03.017 ↗
26. P. Han, X.Z. An, Y.X. Zhang, F. Huang, T.X. Yang, H.T. Fu, X.H. Yang, and Z.S. Zou: Powder Technol., 2017, vol. 314, pp. 69–77.10.1016/j.powtec.2016.11.021 ↗
27. N.A. Fleck, L.T. Kuhn, and R.M. McMeeking: J. Mech. Phys. Solids, 1992, vol. 40, pp. 1139–62.10.1016/0022-5096(92)90064-9 ↗
28. Marc 2015 User Manual Volume A: Theory and User Information, MSC Software Corporation, Santa Ana, CA, 2015.
29. S. Shima and M. Oyane: Int. J. Mech. Sci., 1976, vol. 18, pp. 285–91.10.1016/0020-7403(76)90030-8 ↗
30. R.J. Green: Int. J. Mech. Sci., 1972, vol. 14, pp. 215–24.10.1016/0020-7403(72)90063-X ↗
31. H.A. Kuhn and C.L. Downey: Int. J. Powder Metall., 1971, vol. 7, pp. 15–25.
32. W. Wang, T. Deng, and S.G. Zhao: Spec. Purp. Rubber Prod., 2004, vol. 25, pp. 8–10 (in Chinese).
33. H.C. Yang, J.K. Kim, and K.T. Kim: Mater. Sci. Eng. A, 2004, vol. 382, pp. 41–49.10.1016/j.msea.2004.04.056 ↗
34. A.K. Eksi and A.H. Yuzbasioglu: Mater. Des., 2007, vol. 28, pp. 1364–68.10.1016/j.matdes.2006.01.018 ↗
35. W. Wu, G. Jiang, R.H. Wagoner, and G.S. Daehn: Acta Mater., 2000, vol. 48, pp. 4323–30.10.1016/S1359-6454(00)00206-8 ↗
36. R.W. Heckel: Trans. TMS-AIME, 1961, vol. 221, pp. 671–75.
37. R. Ramberger and A. Burger: Powder Technol., 1985, vol. 43, pp. 1–9.10.1016/0032-5910(85)80073-5 ↗
38. R.M. German: Particle Packing Characteristics, Metal Powder Industries Federation, Princeton, NJ, 1989.