Densification of Ni and TiAl by SPS: Kinetics and Microscopic Mechanisms
Source abstract
Abstract
Densification by spark plasma sintering (SPS) of ductile (Ni) and brittle (TiAl) metallic materials has been studied to elucidate the mechanism of densification in the two cases. Isothermal densification experiments were carried out to determine the activation parameters in Ni. Transmission electron microscopy (TEM) observations of thin foils extracted by focused ion beam (FIB) in the contact regions between particles of TiAl and Ni powders are presented. Macroscopically, the most striking feature observed here is that the densification of Ni takes place in the wide temperature range of 0.2 to 1.0 Tm, whereas that of TiAl varies in the temperature range of 0.7 to 0.9 Tm, which is significantly narrower (Tm being the melting temperature of Ni and the peritectic temperature of TiAl). In Ni, the low activation energy (164 ± 30 kJ/mol), the high dislocation density in the interparticle contact region, and the formation of recovery cells involving dislocation climb indicate that the rate-controlling mechanism is probably self-diffusion in dislocations. In TiAl, high dislocation densities leading to reorganization into subboundaries point to dislocation climb mechanisms, which are kinetically controlled by volume diffusion. The difference in densification kinetics between Ni and TiAl is then accounted for in terms of the difference in their respective rate-controlling mechanisms operative during densification.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced materials and composites · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Z.A. Munir, U. Anselmi-Tamburini, M. Ohyanagi: J. Mater. Sci., 2006, vol. 41, pp. 763-77.10.1007/s10853-006-6555-2 ↗
2. R. Orru, R. Licheri, A.M. Locci, A. Cincotti, G. Cao: Mater. Sci. Eng. R, 2009, vol. 63, pp. 127-287.10.1016/j.mser.2008.09.003 ↗
3. M. Tokita: Mater. Sci. Forum, 1999, vol. 308-311, pp. 83-88.10.4028/www.scientific.net/MSF.308-311.83 ↗
4. M. Omori: Mater. Sci. Eng. A, 2000, vol. 287, pp. 183-88.10.1016/S0921-5093(00)00773-5 ↗
5. K. Okazaki: Mater. Sci. Eng. A, 2000, vol. 287, pp. 189-97.10.1016/S0921-5093(00)00775-9 ↗
6. J.R. Groza, A. Zavaliangos: Mater. Sci. Eng. A, 2000, vol. 287, pp. 171-77.10.1016/S0921-5093(00)00771-1 ↗
7. O. Yanagisawa, H. Kuramoto, K. Matsugi, M. Komatsu: Mater. Sci. Eng. A, 2003, vol. 350, pp. 184-89.10.1016/S0921-5093(02)00726-8 ↗
8. R. Marder, C. Estournès, G. Chevallier, R. Chaim: Scripta Mater., 2014, vol. 82, pp. 57-60.10.1016/j.scriptamat.2014.03.023 ↗
9. R. Marder, C. Estournès, G. Chevallier, R. Chaim: J. Mater. Sci., 2015, vol. 50, pp.4636-45.10.1007/s10853-015-9015-z ↗
10. T. Saunders, S. Grasso, M.J. Reece: J. Eur. Ceram. Soc., 2015, vol. 35, pp. 871-77.10.1016/j.jeurceramsoc.2014.09.022 ↗
11. T. Grosdidier, G. Ji, F. Bernard, E. Gaffet, Z.A. Munir, S. Launois: Intermetallics, 2006, vol. 14, pp. 1208-13.10.1016/j.intermet.2005.11.033 ↗
12. G. Ji, T. Grosdidier, N. Bozzolo, S. Launois: Intermetallics, 2007, vol. 15, pp. 108-18.10.1016/j.intermet.2006.03.006 ↗
13. J.M. Frei, U. Anselmi-Tamburini, Z.A. Munir: J. App. Phys., 2007, vol. 101; p. 114914.10.1063/1.2743885 ↗
14. S. Nowak, L. Perrière, L. Dembinski, S. Tusseau-Nenez, Y. Champion: J. Alloys Compd., 2001, vol. 509, pp. 1011-19.10.1016/j.jallcom.2010.09.158 ↗
15. Y. Xiong, D. Liu, Y. Li, B. Zheng, C. Haines, J. Paras, D. Martin, D. Kapoor, E.J. Lavernia, J.M. Schoenung: Metall. Mat. Trans A, 2012, vol. 43A, pp. 327-39.10.1007/s11661-011-0933-3 ↗
16. J.S. Diouf, A. Fedrizzi, A. Molinari: Powder Technol., 2013, vol. 221, pp. 220-27.10.1016/j.powtec.2012.01.005 ↗
17. H. Conrad, A.F. Sprecher, W.D. Cao, X.P. Lu: JOM, 1990, vol. 42, pp. 28-33.10.1007/BF03221075 ↗
18. B.R. Livesay, N.E. Donlin, A.K. Garrison, H.M. Harris, J.L. Hubbard: International Reliability Physics Symposium, IEEE, 1992, p. 217.10.1109/IRPS.1992.363299 ↗
19. Z. Shen, M. Johnson, Z. Zhao, M. Nygren: J. Am. Ceram. Soc., 2002, vol. 85, pp. 1921-27.10.1111/j.1151-2916.2002.tb00381.x ↗
20. G. Jouan, M. Dollé, J.P. Monchoux: Solid State Ionics, 2013, vol. 236, pp. 5-10.10.1016/j.ssi.2013.02.003 ↗
21. R. Collet, S. Le Gallet, F. Naimi, F. Charlot, S. Lay, G. Bonnefont, G. Fantozzi, J.M. Chaix, F. Bernard: J. Alloys Compd., 2017, vol. 692, pp. 478-84.10.1016/j.jallcom.2016.08.191 ↗
22. Z. Trzaska, G. Bonnefont, G. Fantozzi, J.P. Monchoux: Acta Mater., 2017, vol. 135, pp. 1-13.10.1016/j.actamat.2017.06.004 ↗
23. J. Trapp, B. Kieback: J. Am. Ceram. Soc., 2015, vol. 98, pp. 3547-52.10.1111/jace.13757 ↗
24. C. Collard, Z. Trzaska, L. Durand, J.M. Chaix, J.P. Monchoux: Powder Technol., 2017, vol. 321, pp. 458-70.10.1016/j.powtec.2017.08.033 ↗
25. Z. Trzaska, J.P. Monchoux: J. Alloys Compd., 2015, vol. 635, pp. 142-49.10.1016/j.jallcom.2015.02.122 ↗
26. B.W. Choi, Y.G. Deng, C. McCullough, B. Paden, R. Mehrabian: Acta Metal. Mater., 1990, vol. 38, pp. 2225-43.10.1016/0956-7151(90)90090-4 ↗
27. H.A Calderon, V. Garibay-Febles, M. Umemoto, M. Yamaguchi: Mater. Sci. Eng. A, 2002, vol. 329-331, pp. 196-205.10.1016/S0921-5093(01)01568-4 ↗
28. Y.Y. Chen, H.B. Yu, D.L. Zhang, L.H. Cha: Mater. Sci. Eng. A, 2009, vol. 525, pp. 66-73.10.1016/j.msea.2009.06.056 ↗
29. A. Couret, G. Molénat, J. Galy, M. Thomas: Intermetallics, 2008, vol. 16, pp. 1134-41.10.1016/j.intermet.2008.06.015 ↗
30. X. Lu, X.B. He, B. Zhang, L. Zhang, X.H. Qu, Z.X. Guo: Intermetallics, 2009, vol. 17, pp. 840-46.10.1016/j.intermet.2009.03.013 ↗
31. H. Jabbar, A. Couret, L. Durand, J.P. Monchoux: J. Alloys Compd., 2011, vol. 509, pp. 9826-35.10.1016/j.jallcom.2011.08.008 ↗
32. J. Guyon, A. Hazotte, J.P. Monchoux, E. Bouzy: Intermetallics, 2013, vol. 34, pp. 94-100.10.1016/j.intermet.2012.11.005 ↗
33. S.K. Vajpai, K. Ameyama: Intermetallics, 2013, vol. 42, pp. 146-55.10.1016/j.intermet.2013.06.006 ↗
34. Z. Trzaska, A. Couret, J.P. Monchoux: 5th International Symposium on High Temperature Metallurgical Processing, proceedings of TMS 2014, February 16-20, San-Diego, Wiley, 2014, pp. 329-36.
35. T. Shanmugasundaram, J. Guyon, J.P. Monchoux, A. Hazotte, E. Bouzy: Intermetallics, 2015, vol. 66, pp. 141-48.10.1016/j.intermet.2015.07.007 ↗
36. Z. Trzaska, A. Couret, J.P. Monchoux: Acta Mater., 2016, vol. 118, pp. 100-08.10.1016/j.actamat.2016.07.043 ↗
37. A.S. Helle, K.E. Easterling, M.F. Ashby: Acta Metal., 1985, vol. 33, pp. 2163-74.10.1016/0001-6160(85)90177-4 ↗
38. G. Dirras, S. Bouvier, J. Gubicza, B. Hasni, T. Szilagyi: Mater. Sci. Eng. A, 2009, vol. 526, pp. 201-10.10.1016/j.msea.2009.07.034 ↗
39. G. Dirras, J. Gubicza, S. Ramtani, Q.H. Bui, T. Szilágyi: Mater. Sci. Eng. A, 2010, vol. 527, pp. 1206-14.10.1016/j.msea.2009.09.050 ↗
40. Q.H. Bui, G. Dirras, S. Ramtani, J. Gubicza: Mater. Sci. Eng. A, 2010, vol. 527, pp. 3227-35.10.1016/j.msea.2010.02.003 ↗
41. G. D. Dutel, D. Tingaud, P. Langlois, G. Dirras: J. Mater. Sci., 2012, vol. 47, pp. 7926-31.10.1007/s10853-012-6670-1 ↗
42. G.D. Dutel, P. Langlois, D. Tingaud, G. Dirras: Mater. Charac., 2013, vol. 79, pp. 76-83.10.1016/j.matchar.2013.02.013 ↗
43. L. Farbaniec, G. Dirras, A. Krawczynska, F. Mompiou, H. Couque, F. Naimi, F. Bernard, D. Tingaud: Mater. Charac., 2014, vol. 94, pp. 126-37.10.1016/j.matchar.2014.05.008 ↗
44. D. Tingaud, P. Jenei, A. Krawczynska, F. Mompiou, J. Gubicza, G. Dirras: Mater. Charac., 2015, vol. 99, pp. 118-27.10.1016/j.matchar.2014.11.025 ↗
45. L. Minier, S. Le Gallet, Y. Grin, F. Bernard: J. Alloys Compd., 2010, vol. 508, pp. 412-18.10.1016/j.jallcom.2010.08.077 ↗
46. L. Minier, S. Le Gallet, Y. Grin, F. Bernard: Mater. Chem. Phys., 2012, vol. 134, pp. 243-53.10.1016/j.matchemphys.2012.02.059 ↗
47. F. Naimi, L. Minier, S. Le Gallet, H. Couque, F. Bernard: J. Nanomater., 2013. https://doi.org/10.1155/2013/67484310.1155/2013/674843 ↗
48. G. Bernard-Granger, C. Guizard: Acta Mater., 2007, vol. 55, pp. 3493-504.10.1016/j.actamat.2007.01.048 ↗
49. E. Arzt, M.F. Ashby, K.E. Easterling: Metal. Trans. A, 1983, vol. 14, pp. 211-21.10.1007/BF02651618 ↗
50. G. Bernard-Granger, A. Addad, G. Fantozzi, G. Bonnefont, C. Guizard, D. Vernat: Acta Mater., 2010, vol. 58, pp. 3390-99.10.1016/j.actamat.2010.02.013 ↗
51. L. Ramond, G. Bernard-Granger, A. Addad, C. Guizard: Acta Mater., 2010, vol. 58, pp. 5120-28.10.1016/j.actamat.2010.05.047 ↗
52. H. Mehrer: Landolt-Bornstein, Numerical Data and Functional Relationships in Science and Technology, Group III: Crystal and Solid State Physics, Volume 26: Diffusion in Solid Metals and Alloys. Springer, Berlin, 1990.
53. M.J. Luton, C.M. Sellars: Acta Metal., 1969, vol. 17, pp. 1033-43.10.1016/0001-6160(69)90049-2 ↗
54. J. Weertman, P. Shahinian: Trans. AIME, 1956, vol. 206, pp.1223-26.
55. H.J. Frost, M.F. Ashby: Deformation-Mechanism Maps, Pergamon Press, Oxford, 1982.
56. F.J. Humphreys, M. Hatherly. Recrystallization and Related Annealing Phenomena, Elsevier, Oxford, 2004.
57. R.F. Canon, J.P. Stark: J. App. Phys., 1969, vol. 40, pp. 4366-73.10.1063/1.1657200 ↗
58. C. Herzig, T. Przeorski, Y. Mishin: Intermetallics, 1999, vol. 7, pp. 389-404.10.1016/S0966-9795(98)00117-4 ↗