journal article·2018-08

An Electromagnetic Compounding Technique for Counteracting the Thermoelectric Magnetic Effect During Directional Solidification Under a Transverse Static Magnetic Field

Zhe Shen, Bangfei Zhou, Yunbo Zhong, Licheng Dong, Huai Wang, Lijun Fan, Tianxiang Zheng, Chuanjun Li, Weili Ren, Weidong Xuan, Zhongming Ren

Publisher page

Abstract

An external direct current (DC) was introduced to counteract the thermoelectric magnetic effect during the directional solidification of Sn-10 wt pct Bi alloy under a 0.5 T transverse static magnetic field. The results show that the single-side Bi segregation induced by the thermoelectric magnetic effect gradually becomes weakened, disappeared, and then reversed with the increasing current density of the external DC. Therefore, a new method for counteracting the thermoelectric magnetic effect during materials processing under the magnetic field was proposed. In order to verify this method, the absolute thermoelectric power of Sn-10 wt pct Bi alloy and the internal thermoelectric current under the experimental conditions were measured and calculated, respectively. A 2D numerical simulation was established to simulate the evolution of the solid–liquid interface morphology, flow field, and composition segregation with the increasing current density of the external DC during directional solidification under a transverse static magnetic field. The present study not only facilitates the understanding of the effects of the forced flows on the directionally solidified microstructures and composition segregation, but also provides a new way for eliminating segregation and obtaining the higher-quality solidification structure by using the electromagnetic compounding technique.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. K. Hoshikawa: Jpn. J. Appl. Phys., 1982, vol. 21, pp. 545-47.10.1143/JJAP.21.L545 ↗
2. K. Hoshi, N. Isawa, T. Suzuki, Y. Ohkubo: J. Electrochem Soc., 1985, vol. 132, pp. 693-700.10.1149/1.2113933 ↗
3. R.M. Erb, A.R. Studart: Science, 2012, vol. 335, pp. 199-204.10.1126/science.1210822 ↗
4. R. Moreau, O. Laskar, M. Tanaka, D. Camel: Mater. Sci. Eng. A, 1993, vol. 173, pp. 93-100.10.1016/0921-5093(93)90194-J ↗
5. S.N. Tewari, R. Shah, H. Song: Metall. Mater. Trans. A, 1994, vol. 25, pp. 1535-44.10.1007/BF02665485 ↗
6. J. Wang, Z. Ren, Y. Fautrelle, X. Li, H. Nguyen-Thi, N. Mangelinck-Noel, G.S.A. Jaoude, Y. Zhong, I. Kaldre, A. Bojarevics: J. Mater. Sci., 2013, vol. 48, pp. 213-19.10.1007/s10853-012-6730-6 ↗
7. X. Li, Y. Fautrelle, A. Gagnoud, D. Du, J. Wang, Z. Ren, H. Nguyen-Thi, N. Mangelinck-Noel: Acta Mater., 2014, vol. 64, pp. 367-81.10.1016/j.actamat.2013.10.050 ↗
8. W.D. Bennon, F.P. Incropera: Metall. Trans. B, 1987, vol. 18, pp. 611-16.10.1007/BF02654275 ↗
9. C. Beckermann, R. Viskanta: Physicochem. Hydrodyn., 1988, vol. 10 pp. 195-213.
10. J. Ni, C. Beckermann: Metall. Trans. B, 1991, vol. 22, pp. 349-61.10.1007/BF02651234 ↗
11. M.C. Schneider, C. Beckermann: Metall. Mater. Trans. A, 1995, vol. 26, pp. 2373-88.10.1007/BF02671251 ↗
12. M.C. Schneider, C. Beckermann: Int. J. Heat Mass Transf., 1995, vol. 38, pp. 3455-73.10.1016/0017-9310(95)00054-D ↗
13. ITS-90 Thermocouples Database (National institute of standards and technology, 2008), https://srdata.nist.gov/its90/type_t/-270to0.html. Last modifed on 17 April 2008.
14. I. KALDRE, Y. FAUTRELLE, J. ETAY, A. BOJAREVICS, L. BULIGINS: Mod. Phys. Lett. B, 2011, vol. 25, pp. 731-38.10.1142/S0217984911026048 ↗
15. Y.F. Cao, Y. Chen, D.Z. Li, H.W. Liu, P.X. Fu: Metall. Mater. Trans. A, 2016, vol. 47, pp. 2927-39.10.1007/s11661-016-3417-7 ↗
16. J. Wang, Y. Fautrelle, Z.M. Ren, H. Nguyen-Thi, A.J. Salloum, G, G. Reinhart, N. Mangelinck-Noel, X. Li, I. Kaldre: Appl. Phys. Lett., 2014, vol. 104, pp. 121926.
17. M.C. Schneider, J.P. Gu, C. Beckermann, W.J. Boettinger, U.R. Kattner: Metall. Mater. Trans. A, 1997, vol. 28, pp. 1517-31.10.1007/s11661-997-0214-3 ↗
18. S. Karagadde, L. Yuan, N. Shevchenko, S. Eckert, P.D. Lee: Acta Mater., 2014, vol. 79, pp. 168-80.10.1016/j.actamat.2014.07.002 ↗
19. W. Wang, P.D. Lee, M. Mclean: Acta Mater., 2003, vol. 51, pp. 2971-87.10.1016/S1359-6454(03)00110-1 ↗
20. T Iida and Roderick I. L Guthrie: The physical properties of liquid metals, 1nd ed., Oxford University Press, Oxford, 1988, pp. 192.
21. D. Liu, B. Sang, X. Kang, D. Li: Metall. Mater. Trans. B, 2011, vol. 42, pp. 210-23.10.1007/s11663-010-9426-9 ↗
22. J.J. Favier, J.P. Garandet, A. Rouzaud, D. Camel: J. Crys. Growth, 1994, vol. 140, pp. 237-43.10.1016/0022-0248(94)90517-7 ↗
23. P. Lehmann, R. Moreau, D. Camel, R. Bolcato: Acta Mater., 1998, vol. 46, pp. 4067-79.10.1016/S1359-6454(98)00064-0 ↗
24. J.J. Favier, P. Lehmann, J.P. Garandet, B. Drevet, F. Herbillon: Acta Mater., 1996, vol. 44, pp. 4899-4907.10.1016/S1359-6454(96)00118-8 ↗
25. D. Du, Y. Fautrelle, Z. Ren, R. Moreau, X. Li: ISIJ Int., 2017, vol. 57, pp. 833-40.10.2355/isijinternational.ISIJINT-2016-695 ↗
26. N. Cusack, P. Kendall: P. Phys. Soc., 2002, vol. 72, pp. 898-901.10.1088/0370-1328/72/5/429 ↗
27. J.A. Shercliff: J. Fluid Mech., 2006, vol. 91, pp. 231-51.10.1017/S0022112079000136 ↗
28. T. Alboussiere, A.C. Neubrand, J.P. Garandet, R. Moreau: Magnetohydrodynamics, 1995, vol. 31, pp. 228-35.
29. A. Kao, B. Cai, P.D. Lee, K. Pericleous: J. Cryst. Growth, 2016, vol. 457, pp. 270-74.10.1016/j.jcrysgro.2016.07.003 ↗