Effects of Fine Particle Peening Conditions on the Rotational Bending Fatigue Strength of a Vacuum-Carburized Transformation-Induced Plasticity-Aided Martensitic Steel
Source abstract
Abstract
The effects of fine particle peening conditions on the rotational bending fatigue strength of a vacuum-carburized transformation-induced plasticity-aided martensitic steel with a chemical composition of 0.20 pct C, 1.49 pct Si, 1.50 pct Mn, 0.99 pct Cr, 0.02 pct Mo, and 0.05 pct Nb were investigated for the fabrication of automotive drivetrain parts. The maximum fatigue limit, resulting from high hardness and compressive residual stress in the surface-hardened layer caused by the severe plastic deformation and the strain-induced martensite transformation of the retained austenite during fine particle peening, was obtained by fine particle peening at an arc height of 0.21 mm (N). The high fatigue limit was also a result of the increased martensite fraction and the active plastic relaxation via the strain-induced martensite transformation during fatigue deformation, as well as preferential crack initiation on the surface or at the subsurface.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. K. Maniwa, S. Obara, J. Kurogi, S. Kanai, and K. Ueura: Proc. World Tribology Congress 2013, Torino, Italy, 2013, pp. 8–13.
2. J. Kobayashi, S. Song, and K. Sugimoto: ISIJ Int., 2012, vol. 52, pp. 1124–29.10.2355/isijinternational.52.1124 ↗
3. K. Sugimoto and A.K. Srivastava: Metall. Microstr. Anal., 2015, vol. 4, pp. 344–54.10.1007/s13632-015-0221-5 ↗
4. K. Sugimoto and T. Hojo: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 5272–79.10.1007/s11661-016-3500-0 ↗
5. I. Diego-Calderon, P. Rodriguez-Calvillo, A. Lara, J.M. Molina-Aldareguia, R.H. Petrov, D. De Knijf, and I. Sabirov: Mater. Sci. Eng. A, 2015, vol. 641, pp. 215–24.10.1016/j.msea.2015.06.034 ↗
6. G. Gao, B. Zhang, C. Cheng, P. Zhao, H. Zhang, and B. Bai: Int. J. Fatigue, 2016, vol. 92, pp. 203–10.10.1016/j.ijfatigue.2016.06.025 ↗
7. J. Kobayashi, N. Yoshikawa, and K. Sugimoto: ISIJ Int., 2013, vol. 53, pp. 1479–86.10.2355/isijinternational.53.1479 ↗
8. K. Sugimoto, Y. Mizuno, and T. Hojo: Key Eng. Mater., 2016, vol. 665, pp. 85–88.10.4028/www.scientific.net/KEM.665.85 ↗
9. K. Sugimoto, Y. Mizuno, M. Natori, and T. Hojo: Int. J. Fatigue, 2017, vol. 100, pp. 206–14.10.1016/j.ijfatigue.2017.03.022 ↗
10. M. Kobayashi, T. Matsui, and Y. Murakami: Int. J. Fatigue, 1998, vol. 20, pp. 351–57.10.1016/S0142-1123(98)00002-4 ↗
11. S. Bagherifard and M. Guagliano: Eng. Fract. Mech., 2012, vol. 81, pp. 56–68.10.1016/j.engfracmech.2011.06.011 ↗
12. S. Bagherifard, I. Fernandez-Pariente, R. Ghelichi, and M. Guagliano: Mater. Des., 2013, vol. 46, pp. 497–503.10.1016/j.matdes.2012.09.025 ↗
13. K. Dalaei, B. Karlsson, and L.E. Svensson: Mater. Sci. Eng. A, 2011, vol. 528, pp. 1008–15.10.1016/j.msea.2010.09.050 ↗
14. K. Dalaei and B. Karlsson: Int. J. Fatigue, 2012, vol. 38, pp. 75–83.10.1016/j.ijfatigue.2011.11.011 ↗
15. O. Asia, A.C. Canb, J. Pineaultc, and M. Belasselc: Mater. Des., 2009, vol. 30, pp. 1792–97.10.1016/j.matdes.2008.07.020 ↗
16. B. Jo, S. Sharifimehr, Y. Shim, and A. Fatemi: Int. J. Fatigue, 2017, vol. 100, pp. 454–65.10.1016/j.ijfatigue.2016.12.023 ↗
17. M. Kato, Y. Matsumura, R. Ishikawa, Y. Kobayashi, and S. Ujihashi: Electr. Furn. Steel, 2008, vol. 79, pp. 69–76.
18. M. Koshimune, K. Matsui, K. Takahashi, W. Nakano, and K. Ando: Trans. Jpn. Soc. Spring Eng., 2009, vol. 54, pp. 19–26.10.5346/trbane.2009.19 ↗
19. K. Matsui, M. Koshimune, K. Takahashi, and K. Ando: Trans. Jpn. Soc. Spring Eng., 2010, vol. 55, pp. 7–12.10.5346/trbane.2010.7 ↗
20. B.A. Shaw, C. Aylott, P. O’Hara, and K. Brimble: Int. J. Fatigue, 2003, vol. 25, pp. 1279–83.10.1016/j.ijfatigue.2003.08.014 ↗
21. D.P. Davies and S.L. Jenkins: Int. J. Fatigue, 2012, vol. 44, pp. 234–44.10.1016/j.ijfatigue.2012.04.012 ↗
22. N. Egami, C. Kagaya, N. Inoue, H. Takeshita, and H. Mizutani: Jpn. Soc. Mech. Eng. A, 2000, vol. 66, pp. 1936–42.10.1299/kikaia.66.1936 ↗
23. M. Moriyama, T. Nagano, N. Kawagoishi, and S. Takaki: J. Soc. Mater. Sci. Jpn., 2001, vol. 50, pp. 1126-32.10.2472/jsms.50.1126 ↗
24. K. Sugimoto, T. Hojo, and Y. Mizuno: ISIJ Int., 2018, vol. 58, to be published.10.2355/isijinternational.ISIJINT-2017-460 ↗
25. H. Maruyama: J. Jpn. Soc. Heat Treat., 1977, vol. 17, pp. 198–204.
26. Y. Maruyama, T. Miyazaki, and T. Sasaki: J. Soc. Mater. Sci. Jpn., 2015, vol. 64, pp. 560–66.10.2472/jsms.64.560 ↗
27. M. Umemoto: Mater. Trans., 2003, vol. 44, pp. 1900–11.10.2320/matertrans.44.1900 ↗
28. J. Kobayashi, D. Ina, Y. Nakajima, and K. Sugimoto: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 5006–17.10.1007/s11661-013-1882-9 ↗
29. S. Wang, Y. Li, M. Yao, and R. Wang: J. Mater. Process. Technol., 1998, vol. 73, pp. 64–73.10.1016/S0924-0136(97)00213-6 ↗
30. M.A.S. Torres and H.J.C. Voorwald: Int. J. Fatigue, 2002, vol. 24, pp. 877–86.10.1016/S0142-1123(01)00205-5 ↗
31. Y. Shena, S.M. Moghadama, F. Sadeghia, K. Paulsonb, and R.W. Triceb: Int. J. Fatigue, 2015, vol. 75, pp. 135–44.10.1016/j.ijfatigue.2015.02.017 ↗
32. T. Sakaki, K. Sugimoto, and T. Fukuzato: Acta Metall., 1983, vol. 31, pp. 1737–46.10.1016/0001-6160(83)90172-4 ↗
33. K. Shiozawa, T. Ohtani, S. Nishino, M. Okane, S. Kawamura, and T. Naganawa: Trans. Jpn. Soc. Mech. Eng. A, 1998, vol. 64, pp. 3050–57.10.1299/kikaia.64.3050 ↗