Validation and Analysis of the Parameters for Reconstructing the Austenite Phase from Martensite Electron Backscatter Diffraction Data
Source abstract
Abstract
This work focuses on the validation of a method for reconstructing the fcc crystallographic data from martensite orientation electron backscatter diffraction (EBSD) maps based on the “γ nuclei identification” and “γ nuclei spreading strategy.” To that end, an Fe-30Ni alloy was employed. The martensite transformation start temperature (M s ) of this material is close to or below room temperature; therefore, during hot deformation and after water quenching, it presents an fcc austenitic microstructure, while after subzero quenching, austenite-to-martensite transformation takes place. Accordingly, the reconstruction procedure can be applied to the martensitic EBSD crystallographic data, and the morphological and orientation results of the reconstruction can be validated by comparison with the original crystallographic fcc data. Torsion tests were performed to produce recrystallized and deformed austenite microstructures. Although applying the Kurdjumov–Sachs orientation relationship (OR) resulted in reconstructed area fractions larger than 75 pct, the reconstruction quality improved significantly when other ORs closer to the Greninger–Troiano OR were applied. The analysis carried out on the recrystallized microstructure shows that the method is robust against variation in the different parameters involved in the reconstruction. Good angular and morphological reconstruction results were obtained in both recrystallized and deformed microstructures, including the ability to reconstruct twins.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. H.L. Andrade, M.G. Akben, and J.J. Jonas: Metall. Mater. Trans. A, 1983, vol. 14A, pp. 1967–77.10.1007/BF02662364 ↗
2. A.I. Fernandez, B. Lopez, and J.M. Rodriguez-Ibabe: Scripta Mater., 1999, vol. 40, pp. 543–49.10.1016/S1359-6462(98)00452-7 ↗
3. S. Bechet and L. Beaujard: Rev. Met., 1955, vol. 52, pp. 830–36.10.1051/metal/195552100830 ↗
4. D.R. Barraclough: Metallography, 1973, vol. 6, pp. 465–72.10.1016/0026-0800(73)90044-X ↗
5. A.H. Ücisik, C.J. McMahon, and H.C. Feng: Metall. Trans. A, 1978, vol. 9A, pp. 604–06.10.1007/BF02646420 ↗
6. N. Bernier, L. Bracke, L. Malet, and S. Godet: Mater. Charact., 2014, vol. 89, pp. 23–32.10.1016/j.matchar.2013.12.014 ↗
7. L. Germain, N. Gey, R. Mercier, P. Blaineau, and M. Humbert: Acta Mater., 2012, vol. 60, pp. 4551–62.10.1016/j.actamat.2012.04.034 ↗
8. M. Humbert, F. Wagner, H. Moustahfid, and C. Esling: J. Appl. Cryst., 1995, vol. 28, pp. 571–76.10.1107/S0021889895004067 ↗
9. M. Humbert and N. Gey: J. Appl. Cryst., 2002, vol. 35, pp. 401–05.10.1107/S0021889802005824 ↗
10. N. Gey and M. Humbert: J. Mater. Sci., 2003, vol. 38, pp. 1289–94.10.1023/A:1022842712172 ↗
11. C. Cayron, B. Artaud, and L. Briottet: Mater. Charact., 2006, vol. 57, pp. 386–401.10.1016/j.matchar.2006.03.008 ↗
12. V. Tari, A.D. Rollett, and H. Beladi: J. Appl. Cryst., 2013, vol. 46, pp. 210–15.10.1107/S002188981204914X ↗
13. G. Miyamoto, N. Iwata, N. Takayama, and T. Furuhara: Acta Mater., 2010, vol. 58, pp. 6393–03.10.1016/j.actamat.2010.08.001 ↗
14. G. Miyamoto, N. Iwata, N. Takayama, and T. Furuhara: ISIJ Int., 2011, vol. 51, pp. 1174–78.10.2355/isijinternational.51.1174 ↗
15. C. Cayron: J. Appl. Crystallogr., 2007, vol. 40, pp. 1183–88.10.1107/S0021889807048777 ↗
16. D. Poddar, P. Cizek, H. Beladi, and P.D. Hodgson: Acta Mater., 2014, vol. 80, pp. 1–15.10.1016/j.actamat.2014.07.035 ↗
17. D. Poddar, P. Cizek, H. Beladi, and P.D. Hodgson: Acta Mater., 2015, vol. 99, pp. 347–62.10.1016/j.actamat.2015.08.003 ↗
18. E.J. Palmiere, P. Cizek, F. Bai, R.M. Poths, J. Turner, B.P. Wynne, and W.M. Rainforth: Mater. Manuf. Process., 2011, vol. 26, pp. 127–31.10.1080/10426910903143472 ↗
19. F. Ciura, B. Dubiel, and K. Satora: Mater. Charact., 2006, vol. 56, pp. 290–96.10.1016/j.matchar.2005.10.012 ↗
20. TSL OIM Analysis 5.31, Package 7000, EDAX, Mahwah, NJ.
21. MATLAB, Release 2013b, The MathWorks, Inc., Natick, MA.
22. M. Humbert, F. Wagner, and C. Esling: J. Appl. Cryst., 1992, vol. 25, pp. 724–30.10.1107/S0021889892005375 ↗
23. G. Miyamoto, N. Takayama, and T. Furuhara: Scripta Mater., 2009, vol. 60, pp. 1113–16.10.1016/j.scriptamat.2009.02.053 ↗
24. M. Humbert, P. Blaineau, L. Germain, and N. Gey: Scripta Mater., 2011, vol. 64, pp. 114–17.10.1016/j.scriptamat.2010.09.016 ↗
25. M. Humbert, L. Germain, N. Gey, and E. Boucard: Acta Mater., 2015, vol. 82, pp. 137–44.10.1016/j.actamat.2014.09.007 ↗
26. D.G. Brandon: Acta Metall., 1966, vol. 14, pp. 1479–84.10.1016/0001-6160(66)90168-4 ↗
27. B.L. Henrie, T.A. Mason, and B.L. Hansen: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3745–51.10.1007/s11661-004-0280-8 ↗
28. D.P. Field, L.T. Bradford, M.M. Nowell, and T.M. Lillo: Acta Mater., 2007, vol. 55, pp. 4233–41.10.1016/j.actamat.2007.03.021 ↗
29. W.M. Rainforth, M.P. Black, R.L. Higginson, E.J. Palmiere, C.M. Sellars, I. Prabst, P. Warbichler, and F. Hofer: Acta Mater., 2002, vol. 50, pp. 735–47.10.1016/S1359-6454(01)00389-5 ↗
30. H. Beladi, P. Cizek, and P.D. Hodgson: Acta Mater., 2010, vol. 58, pp. 3531–41.10.1016/j.actamat.2010.02.026 ↗
31. H. Beladi, P. Cizek, and P.D. Hodgson, Metall. Mater. Trans. A, 2009, vol. 40A, pp. 1175–89.10.1007/s11661-009-9799-z ↗
32. L. Llanos, B. Pereda, and B. López: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 5248–65.10.1007/s11661-015-3066-2 ↗