Microstructure, Texture, and Mechanical Properties of β Solution-Treated and Aged Metastable β Titanium Alloy, Ti-5Al-5Mo-5V-3Cr
Source abstract
Abstract
The current study describes the aging characteristics and mechanical properties of a metastable β titanium alloy Ti-5Al-5Mo-5V-3Cr. The aged microstructures consist of fine α-phase precipitates (lath morphology) in equiaxed β grains. The sizes of the α-phase precipitates increase with the increasing aging temperature. The β ST WQ and 823 K (550 °C)-aged material exhibits maximum hardness due to precipitation hardening. The low- and high-temperature aging conditions result in strong c-type basal and prismatic textures in the α-phase, respectively. The β-phase of the alloy aged at low temperature reveals the presence of texture with moderate intensity. In contrast, high-temperature-aged material exhibits very strong β-phase texture. The strengths of the alloy under β ST WQ- and 923 K (650 °C)-aged conditions are the maximum and minimum along TD and RD, while the ductility values are the maximum and minimum along the RD and TD direction samples, respectively. The flow curves follow typical Holloman equation along three sample directions, and the work hardening rate curves display two distinctive regimes, namely, stage I and stage II. The yield locus plots of the β ST WQ and aged materials exhibit the presence of anisotropy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Metal and Thin Film Mechanics · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. R.R. Boyer and R.D. Briggs: J. Mater. Eng. Perform., 2005, vol. 14, pp. 681-85.10.1361/105994905X75448 ↗
2. N.G. Jones, R.J. Dashwood, D. Dye, and M. Jackson: Mater. Sci. Eng. A, 2008, vol. 490, pp. 369-77.10.1016/j.msea.2008.01.055 ↗
3. N.G. Jones, R.J. Dashwood, D. Dye, and M. Jackson: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 1944-54.10.1007/s11661-009-9866-5 ↗
4. V.V. Tetyukhin: Proceedings of 13th Annual Titanium Conference, ITA, San Francisco CA, 1997.
5. S. Veeck, D. Lee, R. Boyer, and R. Briggs, J. Adv. Mater., 2005, vol. 37, pp. 40-45.
6. N. Clement, A. Lenain, and P.J. Jacques: J. Met., 2007, vol. 59, pp. 50-53.
7. V.N. Moiseev: in Titanium 95: Science and Technology, P.A. Blenkinsop, W.J. Evans, H.M. Flower, eds., The Institute of Materials, Birmingham, 1995, pp. 1387–94.
8. N.G. Jones, R.J. Dashwood, M. Jackson, and D. Dye: Scripta Mater., 2009, vol. 60, pp. 571-73.10.1016/j.scriptamat.2008.12.010 ↗
9. N.G. Jones, R.J. Dashwood, M. Jackson, and D. Dye: Acta Mater., 2009, vol. 57, pp. 3830-39.10.1016/j.actamat.2009.04.031 ↗
10. A. Ghaderi, P.D. Hodgson, and M.R. Barnett: Key Eng. Mater., 2013, vol. 551, pp. 210-16.10.4028/www.scientific.net/KEM.551.210 ↗
11. J.C. Fanning: J. Mater. Eng. Perform., 2005, vol. 14, pp. 788-791.10.1361/105994905X75628 ↗
12. Premkumar Manda, Vajinder Singh, Uday Chakkingal, and A.K. Singh: Mater. Charact., 2016, vol. 120, pp. 220-228.10.1016/j.matchar.2016.09.005 ↗
13. S. Balachandran, A. Kashiwar, A. Choudhury D. Banerjee, R. Shi, and Y. Wang: Acta Mater., 2016, vol. 106, pp. 374-387.10.1016/j.actamat.2016.01.023 ↗
14. R. Shi, V. Dixit, H.L. Fraser, and Y. Wang: Acta Mater., 2014, vol. 75, pp. 156-166.10.1016/j.actamat.2014.05.003 ↗
15. Premkumar Manda, P. Ghosal, Uday Chakkingal, and A. K. Singh: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 2646-2663.10.1007/s11661-015-2814-7 ↗
16. Premkumar Manda, Uday Chakkingal, and A. K. Singh: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 3447-3463.10.1007/s11661-016-3508-5 ↗
17. D. Lee, F.S. Jabara, and W.A. Beckofen: Trans. AIME, 1967, vol. 239, pp.1476-1478.
18. R.G. Wheeler, and D.R. Ireland: Electrochem. Technol., 1966, vol. 4, pp. 313–17.
19. K. Lagaree: PKSFA Reg. U.S. Patent, Registered Version 2.04, PKWARE Inc., 1989–93.
20. B.W. Levinger: J. Met., 1953, vol. 5, pp. 195.
21. A. Dehghan-Manshadi, and R.J. Dippenaar: Mater. Sci. Eng. A, 2011, vol. 528, pp. 1833-39.10.1016/j.msea.2010.09.061 ↗
22. F.J. Humphreys, and M. Hatherly: Recrystallization and Related Annealing Phenomena, 2nd edition. Elsevier, Boston, 2004.
23. D. Banerjee, and J.C. Williams: Acta Mater., 2013, vol. 61, pp. 844-79.10.1016/j.actamat.2012.10.043 ↗
24. A.K. Singh, and R.A. Schwarger: Z. Metallkd, 2000, vol. 91, pp. 702-16.
25. G.E Dieter: Mechanical Metallurgy, McGraw-Hill Book Co., Singapore, 1988.
26. M-H. Cai, C.Y. Lee, and Y.K. Lee: Scripta Mater., 2012, vol. 66, pp. 606-09.10.1016/j.scriptamat.2012.01.015 ↗
27. J.H. Holloman: Trans. AIME., 1945, vol. 162, pp. 268–90.
28. K.V. Jata, A.K. Hopkins, and R.J. Rioja: Mater. Sci. Forum, 1996, vols. 217-222, pp. 647-52.10.4028/www.scientific.net/MSF.217-222.647 ↗
29. Y.T. Wu, and C.H. Koo: Scripta Mater., 1998, vol. 38, pp. 267-71.10.1016/S1359-6462(97)00431-4 ↗
30. C. Mondal, A.K. Singh, A.K. Mukhopadhyay, and K. Chattopadhyay: Mater. Sci. Eng. A, 2013, vol. 577, pp. 87-100.10.1016/j.msea.2013.03.079 ↗
31. C. Keller, E. Hug, and G. Chateigner: Mater. Sci. Eng. A, 2009, vol. 500, pp. 207-15.10.1016/j.msea.2008.09.054 ↗