journal article·2017-09Open access

C-Curves for Lengthening of Widmanstätten and Bainitic Ferrite

Jiaqing Yin, Lindsay Leach, Mats Hillert, Annika Borgenstam

Abstract

Abstract Widmanstätten ferrite and bainitic ferrite are both acicular and their lengthening rate in binary Fe-C alloys and low-alloyed steels under isothermal conditions is studied by searching the literature and through new measurements. As a function of temperature, the lengthening rate can be represented by a common curve for both kinds of acicular ferrite in contrast to the separate C-curves often presented in time-temperature-transformation (TTT) diagrams. The curves for Fe-C alloys with low carbon content show no obvious decrease in rate at low temperatures down to 623 K (350 °C). For alloys with higher carbon content, the expected decrease of rate as a function of temperature below a nose was observed. An attempt to explain the absence of a nose for low carbon contents by an increasing deviation from local equilibrium at high growth rates is presented. This explanation is based on a simple kinetic model, which predicts that the growth rates for Fe-C alloys with less than 0.3 mass pct carbon are high enough at low temperatures to make the carbon pileup, in front of the advancing tip of a ferrite plate, shrink below atomic dimensions, starting at about 600 K (323 °C).
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. M. Hillert: “The Growth of Ferrite, Bainite and Martensite,” Internal Report, Swedish Institute for Metal Research, Stockholm, 1960, appeared in Thermodynamics and Phase Transformations, The Selected Works of Mats Hillert, J. Ågren, Y. Bréchet, C. Hutchinson, J. Philibert, and G. Purdy, eds., EPD Science, Les Ulis, Cedex, France, 2006, pp. 111–58.
2. L. Kaufman, S.V. Radcliffe, and M. Cohen: in Decomposition of Austenite by Diffusional Processes, V.F. Zackay and H.I Aaronson, eds., Interscience, New York, 1962, pp. 313–52.
3. R.H. Goodenow and R.F. Hehemann: Trans. AIME, 1965, vol. 233, pp. 1777–86.
4. H. Matsuda and H.K.D.H. Bhadeshia: Proc. R. Soc. London A, 2004, vol. 460, pp. 1707–22.10.1098/rspa.2003.1225 ↗
5. Y. Ohmori, H. Ohtsubo, K. Georgima, and N. Maruyama: Mater. Trans. JIM, 1993, vol. 34, pp. 216–23.10.2320/matertrans1989.34.216 ↗
6. H.K.D.H. Bhadeshia: Bainite in Steels, 3rd ed., Maney Publishing, Wakefield, United Kingdom, 2015.
7. L.C.D. Fielding: Mater. Sci. Technol., 2013, vol. 29, pp. 383–99.10.1179/1743284712Y.0000000157 ↗
8. H.K.D.H. Bhadeshia: in Phase Transformations in Ferrous Alloys, A.R. Marder and J.I. Goldstein, eds., ASM, Cleveland, OH, 1984, pp. 335–40.
9. A. Ali and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 1989, vol. 5, pp. 398–402.10.1179/mst.1989.5.4.398 ↗
10. J. Yin, M. Hillert, and A. Borgenstam: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 1425–43.10.1007/s11661-016-3903-y ↗
11. J. Yin, M. Hillert, and A. Borgenstam: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 1444–58.10.1007/s11661-016-3902-z ↗
12. J.O. Andersson, T. Helander, L. Höglund, P.F. Shi, and B. Sundman: Calphad, 2002, vol. 26, pp. 273–312.10.1016/S0364-5916(02)00037-8 ↗
13. P. Kolmskog: Ph.D. Thesis, KTH, Stockholm, 2013.
14. S. Modin: Jernkont. Ann., 1958, vol. 142, pp. 37–80.
15. E.P. Simonen, H.I. Aaronson, and R. Trivedi: Metall. Trans., 1973, vol. 4, pp. 1239–45.10.1007/BF02644517 ↗
16. M.J. Hawkins and J. Barford: J. Iron Steel Inst., 1972, vol. 210, pp. 97–105.
17. X.L. Wan, R. Wei, L. Cheng, M. Enomoto, and Y. Adachi: J. Mater. Sci., 2013, vol. 48, pp. 4345–55.10.1007/s10853-013-7250-8 ↗
18. L. Cheng, K.M. Wu, X.L. Wan, and R. Wei: Mater. Charact., 2014, vol. 87, pp. 86–94.10.1016/j.matchar.2013.11.002 ↗
19. H. Yada and T. Ooka: J. Metall. Soc. Jpn., 1967, vol. 31, pp. 766–71.
20. C. Liu, L. Shi, Y. Liu, C. Li, H. Li, and Q. Guo: J. Mater. Sci., 2016, vol. 51, pp. 3555–63.10.1007/s10853-015-9675-8 ↗
21. M. Hillert: Jernkont. Ann., 1957, vol. 147, pp. 757–89.
22. L. Leach, M. Hillert, and A. Borgenstam: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 19–25.
23. C. Zener: Trans. AIME, 1946, vol. 167, pp. 550–83.
24. J. Ågren: Scripta Metall., 1986, vol. 20, pp. 1507–10.10.1016/0036-9748(86)90384-4 ↗
25. C. Wells, W. Batz, and R.F. Mehl: Trans. AIME, 1950, vol. 188, pp. 553–60.
26. R. Trivedi and G.M. Pound: J. Appl. Phys., 1967, vol. 38, pp. 3569–76.10.1063/1.1710174 ↗
27. Z. Hu, G. Xu, H. Hu, L. Wang, and Z. Xue: Int. J. Miner. Metall. Mater., 2014, vol. 21, pp. 371–78.10.1007/s12613-014-0918-5 ↗
28. C. Wagner: Trans. TMS-AIME, 1952, vol. 194, p. 91.
29. M. Hillert: Acta Metall., 1959, vol. 7, pp. 653–58.10.1016/0001-6160(59)90141-5 ↗
30. J. Ågren: Acta Metall., 1989, vol. 37, pp. 181–89.10.1016/0001-6160(89)90277-0 ↗
31. M. Hillert: “Paraequilibrium,” Internal Report, Swedish Institute for Metal Research, Stockholm, 1953, appeared in Thermodynamics and Phase Transformations, The Selected Works of Mats Hillert, J. Ågren, Y. Bréchet, C. Hutchinson, J. Philibert, and G. Purdy, eds., EPD Science, Les Ulis, Cedex, France, 2006, pp. 9–24.
32. A. Hultgren: Jernkont. Ann., 1951, vol. 135, pp. 403–94.
33. D.E. Coates: Metall. Trans., 1972, vol. 3, pp. 1203–12.10.1007/BF02642453 ↗
34. J. Odqvist, M. Hillert, and J. Ågren: Acta Mater., 2002, vol. 50, pp. 3213–27.10.1016/S1359-6454(02)00143-X ↗
35. H.I. Aaronson, T. Furuhara, M.G. Hall, J.P. Hirth, J.F. Nie, G.R. Purdy, and W.T. Reynolds, Jr.: Acta Mater., 2006, vol. 54, pp. 1227–32.10.1016/j.actamat.2005.10.049 ↗
36. H.K.D.H. Bhadeshia and A.R. Waugh: Acta Metall., 1982, vol. 3, pp. 775–84.10.1016/0001-6160(82)90075-X ↗
37. F.G. Caballero, M.K. Miller, S.S. Babu, and C. Garcia-Mateo: Acta Mater., 2007, vol. 55, pp. 381–90.10.1016/j.actamat.2006.08.033 ↗
38. F.G. Caballero, M.K. Miller, and C. Garcia-Mateo: Acta Mater., 2010, vol. 58, pp. 2338–43.10.1016/j.actamat.2009.12.020 ↗
39. E.V. Pereloma: Mater. Sci. Technol., 2016, vol. 32, pp. 99–103.10.1179/1743284715Y.0000000139 ↗
40. R. Rementeria, J.D. Poplawsky, M.M. Aranda, W. Guo, J.A. Jimenez, C. Garcia-Mateo, and F.G. Caballero: Acta Mater., 2017, vol. 125, pp. 359–68.10.1016/j.actamat.2016.12.013 ↗