journal article·2016-12

Dislocation Substructure in the Cold-Rolled Ni-20 Mass Pct Cr Alloy Analyzed by X-ray Diffraction, Positron Annihilation Lifetime, and Transmission Electron Microscopy

Mitsuharu Yonemura, Koji Inoue

Publisher page

Abstract

The systematic change in the dislocation density and characteristics that develop under cold rolling as a simulated deformation was studied in order to examine the fundamental behavior of dislocations in terms of the dislocation substructure formation. In particular, the dislocation density was quantified by X-ray line profile analysis (XLPA), which is effective for quantifying the dislocation density and character; positron annihilation lifetime (PAL), which is sensitive to vacancy-type lattice defects; the Bailey–Hirsch equation from the hardness (Hv); and transmission electron microscopy (TEM). The strain dependency of the dislocation density analyzed by XLPA, PAL, TEM, and Hv showed a similar tendency with an increase in the dislocation. In particular, the dislocation density by XLPA had good agreement with the results of TEM at low strain levels and with PAL at high strain levels. As a result, a combination of these techniques successfully showed the behavior of the dislocation substructure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Fusion materials and technologies · Advanced Materials Characterization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. X. Xie, S. Zhao, J. Dong, G.D. Smith, B.A. Baker and S.L. Paatel: Fifth International Conference on Advances in Materials Technology for Fossil Power Plants, EPRI, 2007, pp. 3A–06.
2. J. Wang, J. Dong, M. Zhang and X. Xie: Mater. Sci. Eng. A, 2013, vol. 566, pp. 61–70.10.1016/j.msea.2012.12.077 ↗
3. J. Dundurs: J. Appl. Phys, 1968, vol. 39, pp. 4152-4156.10.1063/1.1656939 ↗
4. R. Lagneborg and B. Bergman: Metal Sci., 1976, vol. 10, pp. 20-28.10.1179/030634576790431462 ↗
5. T. M. Pollock and A. S. Argon: Acta Metall. Mater, 1994, vol. 42, pp. 1859-1874.10.1016/0956-7151(94)90011-6 ↗
6. M. Ingnat, J. -Y. Buffiere and J. M. Chaix: Acta Metall. Mater., 1993, vol. 41, pp. 852-862.
7. A. Epishin and T. Link: Superalloys, 2004, pp. 137–4310.7449/2004/Superalloys_2004_137_143 ↗
8. G. S. Ansell and J. Weertman: Trans. Metall. Soc. AIME., 1959, vol. 215, pp. 838-843.
9. D. McLean: Metall. Rev., 1962, vol. 7, pp. 481-527.10.1179/095066062790207803 ↗
10. R. S. W. Shewfelt and L. M. Brown: Philos. Mag., 1977, vol. 35, pp. 945-962.10.1080/14786437708232636 ↗
11. B. Bay, N. Hansen, D. A. Hughes and D. Kuhlmann-Wilsdorf: Acta Metall. Mater., 1992, vol. 40, pp. 205-219.10.1016/0956-7151(92)90296-Q ↗
12. D. A. Hughes and N. Hansen: Metal. Trans., 1993, vol. 24A, pp. 2021-2037.
13. K. Morii and Y. Nakayama: Trans. JIM, 1981, vol. 22, pp. 857-864.10.2320/matertrans1960.22.857 ↗
14. W. B. Hutchinson, B. J. Duggan and M. Hatherly: Metals. Tech., 1979, vol. 6, pp. 398-403.10.1179/030716979803276598 ↗
15. K. Higashida, T. Morikawa: Tetsu-to-Hagané, 2008, vol. 94, pp. 576–581.10.2355/tetsutohagane.94.576 ↗
16. R. K. Ham: Philos. Mag., 1961, vol. 6, pp. 1183-1184.10.1080/14786436108239679 ↗
17. S.C. Stanley and L. Guttman: AIMME Trans. J. Met., 1953, vol. 197, pp. 81–87.
18. J. E. Bailey and P. B. Hirsch: Philos. Mag., 1960, vol. 5, pp. 485-497.10.1080/14786436008238300 ↗
19. Z. S. Basinski: Dislocation in Solids, The Faraday Society, London, 1964, pp.93.
20. G. K. Williamson and W. H. Hall: Acta Metal., 1953, vol. 1, pp. 22-31.10.1016/0001-6160(53)90006-6 ↗
21. B. E. Warren and B. L. Averbach: J. Appl. Phys., 1950, vol. 21, pp. 595-599.10.1063/1.1699713 ↗
22. T. Ungár, and A. Borbely: Appl. Phys. Lett., 1996, vol. 69, pp. 3173-3175.10.1063/1.117951 ↗
23. G.G. Ribárik: PhD dissertation, Eotvos Lorand University, Budapest, Hungary, 2009.
24. H.P. Klug: X-ray Diffraction Procedure, 2nd ed., wiley, 1902, p. 291.
25. J. Martinez-Garcia, M. Leoni and P. Scardi, Acta Cryst., 2009, vol. A65, pp. 109-119.10.1107/S010876730804186X ↗
26. M. R. M. Garagh, S .H. Nedjad, H. Shirazi, M .I. Mobarekeh and M. N .Ahmadabadi: Thin Solid Film, 2008, vol. 516, pp. 8117-8124.10.1016/j.tsf.2008.04.019 ↗
27. T. E. M. Staab, R. Krause-Rehberg and B. Kieback: J. Mater. Sci., 1999, vol. 34, pp. 3833-3851.10.1023/A:1004666003732 ↗
28. 28 B. Bay, N. Hansen, D. A. Hughes and D. Kuhlmann-Wilsdorf: Acta Metall. Mater., 1992, vol. 40, pp. 205-219.10.1016/0956-7151(92)90296-Q ↗
29. D. A. Hughes and N. Hansen: Metall. Trans., 1993, vol. 24A, pp. 2021-2037.
30. A. S. Malin and M. Hatherly: Met. Sci., 1979, vol. 13, pp. 463-472.10.1179/030634579790438363 ↗
31. Fujiki: http://www.fjk-kk.co.jp/advantage/glossary/giplazma.html.
32. U. F. Kocks and H. Mecking: Progress in Materials Science, 2003, vol. 48, pp. 171–273.10.1016/S0079-6425(02)00003-8 ↗
33. P.R. Swan: Electron Microscopy and Strength of Crystals Interscience, New York, 1963, pp. 131–81.
34. C. Lung: J. Mater. Sci. Technol., 1995, vol. 11, pp. 133.
35. V. Vitek: Philos. Mag., 2004, vol. 84, pp. 415-428.10.1080/14786430310001611644 ↗
36. F.R.N. Nabarro and M.S. Duesbury: Dislocations in Solids, Elsevier, Amsterdam, 1989, pp. 507–87.
37. T. Shintani and Y. Murata: Acta Materialia, 2011, vol. 59, pp. 4314-4322.10.1016/j.actamat.2011.03.055 ↗
38. E. Schafler, M. Zehetbauer and T. Ungár: Mat. Sci. Eng. A, 2001, vol. 319-321, pp. 220-223.10.1016/S0921-5093(01)00979-0 ↗
39. P. S. Kotval and O. H. Nestor: Trans. Metal. Soc. AIME, 1969, vol. 245, pp. 1275.
40. H. Ohkubo, Z. Tang, Y. Nagai, M .Hasegawa, T. Tawara and M. Kiritani: Mater. Sci. Eng. A, 2003, vol. 350, pp. 95-101.10.1016/S0921-5093(02)00705-0 ↗
41. S. Fujita, T. Okita, E. Kuramoto and N. Sekimura: J. Nucl. Mater., 2009, vol. 386-388, pp. 93-96.10.1016/j.jnucmat.2008.12.067 ↗
42. D. Bacon, Y. Osetsky and Z. Rong: Philo. Mag., 2006, vol. 86, pp. 3921-3936.10.1080/14786430600570527 ↗
43. V. Shastry and T. Diaz de la Rubia., J. Eng. Mater. Technol., 1999, vol. 121, pp. 126-128.10.1115/1.2812356 ↗
44. H. Heinisch, F. Gao and R. Kurtz: Philo. Mag., 2010, vol. 90, pp. 885-895.10.1080/14786430903294932 ↗
45. Yu. N. Osetsky and D. J. Bacon: J. Nucl. Mater., 2003, vol. 323, pp. 268-280.10.1016/j.jnucmat.2003.08.028 ↗
46. B. D. Wirth, V. V. Bulatov, and T. Diaz de la Rubia: J. Engineer. Mater. Tech., 2002, vol. 124, pp. 329-334.10.1115/1.1479692 ↗