journal article·2016-10Open access

Hydrogen Permeation in Nanostructured Bainitic Steel

Oluwole Kazum, Hossein Beladi, Ilana B. Timokhina, Yinghe He, M. Bobby Kannan

Abstract

Hydrogen permeation of nanostructured bainitic steel, produced at two different transformation temperatures, i.e., 473.15 K (200 °C) BS-200 and 623.15 K (350 °C) BS-350, was determined using Devanathan–Stachurski hydrogen permeation cell and compared with that of mild steel. Nanostructured bainitic steel showed lower effective diffusivity of hydrogen as compared to the mild steel. The BS-200 steel, which exhibited higher volume fraction of bainitic ferrite phase, showed lower effective diffusivity than BS-350 steel. The finer microstructural constituents (bainitic ferrite laths and retained austenite films) and higher dislocation density in the bainitic ferrite phase of BS-200 steel can be attributed to its lower effective diffusivity as compared to BS-350 steel and mild steel.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. 1. I. Park, S. Lee, H. Jeon, and Y. Lee: Corros. Sci., 2015, vol. 93, pp. 63-69.10.1016/j.corsci.2015.01.012 ↗
2. 2. I.B. Timokhina, H. Beladi, X.Y. Xiong, Y. Adachi, and P.D. Hodgson: Acta Mater., 2011, vol. 59, pp 5511-22.10.1016/j.actamat.2011.05.024 ↗
3. 3. F.G. Caballero and H.K.D.H. Bhadeshia: Solid State Mater. Sci., 2004, vol. 8, pp. 251-57.
4. F.G. Caballero, M.K. Miller, S.S. Babu, and C. Garcia Mateo: Acta Mater., 2007, vol. 55, pp. 381–9010.1016/j.actamat.2006.08.033 ↗
5. 5. M.N. Yoozbashi and S. Yazdari: Mater. Sci. Eng. A-Struct., 2010, vol. 527, pp. 3200-05.10.1016/j.msea.2010.01.080 ↗
6. O. Kazum, M. Bobby Kannan, H. Beladi, I.B. Timokhina, P.D. Hodgson, and S. Khoddam: Mater. Des., 2014, vol. 54, pp. 67–81.10.1016/j.matdes.2013.08.015 ↗
7. 7. O. Kazum, M. Bobby Kannan, H. Beladi, I.B. Timokhina, P.D. Hodgson,and S. Khoddam: Adv. Eng. Mater., 2013, vol. 15, pp. 1-3.10.1002/adem.201370001 ↗
8. 8. R. Kacar: Mater. Design, 2004, vol. 25, pp. 1-9.10.1016/S0261-3069(03)00169-9 ↗
9. 9. F.W. Dean: Mater. Sci. Tech. Ser., 2005, vol. 21, pp. 347-51.10.1179/174328405X29212 ↗
10. 10. A.M. Elhoud, N.C. Renton, and W.F. Deans: Int. J. of Hydrogen Energ., 2010, vol. 35, pp. 6455-64.10.1016/j.ijhydene.2010.03.056 ↗
11. 11. Y. Qi, H. Luo, S. Zheng, C. Chen, Z. Lv, and M. Xiong: Mater. Design, 2014, vol. 58, pp. 234-41.10.1016/j.matdes.2014.01.065 ↗
12. 12. T.P. Perng and C.J. Altstetter: Metall. Trans. A, 1987, vol. 18A, pp. 123-34.10.1007/BF02646229 ↗
13. 13. J. Venezuela, Q. Liu, M. Zhang, Q. Zhou, and A. Atrens: Corros. Sci., 2015, vol. 99, pp. 98-17.10.1016/j.corsci.2015.06.038 ↗
14. 14. A.M. Brass, J. Chene, and J. Gonzalez: Metall. Trans. A, 1994, vol. 25A, pp. 1159-67.10.1007/BF02652291 ↗
15. 15. D. Depover, P. Escobar, E. Wallaert, Z, Zermout, and K. Verbeken: Int. J. Hydrogen Energ., 2014, vol. 39, pp. 4647-56.10.1016/j.ijhydene.2013.12.190 ↗
16. 16. M.A. Arafin and J.A. Szpunar: Mater, Sci, Eng, A-Struct., 2011, vol. 528, pp. 4927- 40.10.1016/j.msea.2011.03.036 ↗
17. 17. W.C. Luu, P.W. Liu, and J.K. Wu: Corros. Sci., 2002, vol. 44, pp. 1783-91.10.1016/S0010-938X(01)00143-3 ↗
18. 18. C. Zhou, S. Zheng, C. Chen, and G. Lu: Corros. Sci., 2013, vol. 67, pp. 184-92.10.1016/j.corsci.2012.10.016 ↗
19. 19. W.K. Kim, S.U. Koh, B.Y. Yang, and K.Y. Kim: Corros. Sci., 2008, vol. 50, pp. 3336-42.10.1016/j.corsci.2008.09.030 ↗
20. 20. C.M. Younes, A.M. Steele, J.A. Nicholson, and C.J. Barnett: Int. J. Hydrogen Energ., 2013, vol. 38, pp. 4864-76.10.1016/j.ijhydene.2012.11.016 ↗
21. 21. A.J. Haq, K. Muzaka, D.P. Dunne, A. Calka, and E.V. Pereloma: Int. J. Hydrogen Energ., 2013, vol. 38, pp. 2544-56.10.1016/j.ijhydene.2012.11.127 ↗
22. 22. D.P. Escobar, C. Minambres, L. Duprez, K. Verbenken, and M. Verhaege: Corros. Sci., 2011, vol. 53, pp. 3166-76.10.1016/j.corsci.2011.05.060 ↗
23. 23. J.P. Hirth: Metall. Trans. A, 1980, vol. 11, pp. 861-90.10.1007/BF02654700 ↗
24. 24. J. Xu, X.K. Sun, W.X. Chen, and Y.Y. Li: Acta Metall. Mater., 1993, vol. 4, pp. 1455-59.10.1016/0956-7151(93)90254-P ↗
25. 25. A. Turnbull, M.S. Maria, and N.D. Thomas: Corros. Sci., 1989, vol. 29, pp. 89-04.10.1016/0010-938X(89)90082-6 ↗
26. 26. G. Hong and J. Lee: Metall. Trans. A, 1983, vol.14A, pp. 156-58.10.1007/BF02643751 ↗
27. 27. W.M. Robertson and A.W. Thompson: Metall. Trans. A, 1980, vol. 11A, pp. 553-57.10.1007/BF02670691 ↗
28. 28. A. Kimura and H.K. Birnbaum: Acta Mettall. Mater., 1988, vol. 36, pp. 757-66.10.1016/0001-6160(88)90109-5 ↗
29. 29. T. Tsuru and R.M. Latanision: Scripta Metall. Mater., 1982, vol. 16, pp. 575-78.10.1016/0036-9748(82)90273-3 ↗
30. 30. A.M. Brass and A. Chanfreau: Scripta Metall. Mater., 1990, vol. 24, pp. 499-04.10.1016/0956-716X(90)90190-R ↗
31. 31. S. Chou and W. Tsai: Mater. Sci. Eng. A-Struct., 1999, vol. A270, pp. 219-24.10.1016/S0921-5093(99)00174-4 ↗
32. 32. B.A. Szost, R.H. Vegter, E.J. Pedro, and R.A. Castillo: Metall. Mater. Trans. A, 2013, vol. 44(10), pp. 4542-50.10.1007/s11661-013-1795-7 ↗
33. 33. F. Huang, J. Liu, Z.J. Deng, J.H. Cheng, Z.H. Lu, and X.G. Li: Mater. Sci. and Eng. A-Struct. 2010, vol. 527, pp. 6997-01.10.1016/j.msea.2010.07.022 ↗
34. 34. B.A. Szost, R.H. Vegter, and R.A. Castillo: Mater. Design, 2013, vol. 43, pp. 499-06.10.1016/j.matdes.2012.07.030 ↗
35. 35. M.F. Stevens and I.M. Bernstein; Metall. Trans. A, 1989, vol. 20A, pp. 909-19.10.1007/BF02651657 ↗
36. C. Garcia Mateo, F.G. Caballero, and H.K.D.H. Bhadeshia: ISIJ Int., 2003, vol. 43, pp. 1821–25.10.2355/isijinternational.43.1821 ↗
37. 37. R. Nishimura, D. Shiraishi, and Y. Maeda: Corros. Sci., 2004, vol. 46, pp. 225-43.10.1016/S0010-938X(03)00141-0 ↗
38. 38. V. Olden, C. Thaulow, and R. Johnsen: Mater. Design, 2008, vol. 29, pp. 1934-48.10.1016/j.matdes.2008.04.026 ↗
39. 39. L.C.D. Fielding, E.J. Song, D.K. Han, H.K.D.H. Bhadeshia, and D.W. Suh: P. Roy. Soc. Lond. A Mat., 2014, vol. 470, pp. 1-13.10.1098/rspa.2014.0108 ↗
40. 40. A.J Kumnick and H.H. Johnson: Acta Mettall. Mater., 1980, vol. 28, pp. 33-39.10.1016/0001-6160(80)90038-3 ↗