journal article·2015-10

Rapid Synthesis of a Near-β Titanium Alloy by Blended Elemental Powder Metallurgy (BEPM) with Induction Sintering

Mingtu Jia, Brian Gabbitas

Publisher page

Abstract

A near-β Ti-13V-11Cr-3Al alloy was produced by blended elemental powder metallurgy combining warm compaction and induction sintering. Two Ti-13V-11Cr-3Al powder compacts with different oxygen content were manufactured by mixing PREP and HDH Ti powders with Cr and AlV master alloy powders, respectively. The effect of isothermal holding time, at a sintering temperature of 1573 K (1300 °C), on pore characteristics and compositional homogeneity was investigated in this study. Pore coarsening by Ostwald ripening occurred with an increase in the isothermal holding time and Kirkendall voids were produced by a reaction between Ti and Cr. After an isothermal holding time of 10 minutes, the two sintered powder compacts had a homogeneous composition. Ti/AlV and Ti/Cr diffusion couples were used to predict the distribution of alloying elements, and the binary Ti-V, Ti-Al, and Ti-Cr interdiffusion coefficients were consistent with the distribution of alloying elements after isothermal holding. The mechanical properties of sintered powder compacts, prepared using PREP Ti powder as the raw powder, were optimized by sintered density and pore size.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Advanced materials and composites · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. M. Niinomi, M. Nakai, J. Hieda, K. Cho, T. Kasuga, T. Hattori, T. Goto and T. Hanawa: Int. J. Surf. Sci. Eng., 2014, vol. 8, pp. 138-52.10.1504/IJSURFSE.2014.060487 ↗
2. R. Banerjee, S. Nag and H. Fraser: Mater. Sci. Eng., C, 2005, vol. 25, pp. 282-89.10.1016/j.msec.2004.12.010 ↗
3. M. Niinomi: Metall. Mater. Trans. A, 2002, vol. 33, pp. 477-86.10.1007/s11661-002-0109-2 ↗
4. R. Boyer, G. Welsch and E.W. Collings: Materials Properties Handbook: Titanium Alloys. ASM international, Materials Park, OH, USA, 1994, pp. 877-78.
5. A. Mitchell, A. Kawakami and S. Cockcroft: High Temp. Mater. Processes (London), 2006, vol. 25, pp. 337-49.10.1515/HTMP.2006.25.5-6.337 ↗
6. W. Zeng and Y. Zhou: Mater. Sci. Eng., A, 1999, vol. 260, pp. 203-11.10.1016/S0921-5093(98)00954-X ↗
7. H. Guo, Z. Zhao, C. Duan and Z. Yao: JOM, 2008, vol. 60, pp. 47-49.10.1007/s11837-008-0147-3 ↗
8. D.G. Savvakin, A. Carman, O.M. Ivasishin, M.V. Matviychuk, A.A. Gazder and E.V. Pereloma: Metall. Mater. Trans. A, 2012, vol. 43, pp. 716-23.10.1007/s11661-011-0875-9 ↗
9. J. Málek, F. Hnilica, J. Veselý and B. Smola: Mater. Charact., 2013, vol. 84, pp. 225-31.10.1016/j.matchar.2013.08.006 ↗
10. M. Ahmed, A.A. Gazder, D.G. Savvakin, O.M. Ivasishin and E.V. Pereloma: J. Mater. Sci., 2012, vol. 47, pp. 7013-25.10.1007/s10853-012-6652-3 ↗
11. A. Carman, L. Zhang, O. Ivasishin, D. Savvakin, M. Matviychuk and E. Pereloma: Mater. Sci. Eng., A, 2011, vol. 528, pp. 1686-93.10.1016/j.msea.2010.11.004 ↗
12. E.V. Pereloma, D.G. Savvakin, A. Carman, A.A. Gazder and O.M. Ivasishin: Key Eng. Mater., 2012, vol. 520, pp. 49-56.10.4028/www.scientific.net/KEM.520.49 ↗
13. O.M. Ivasishin, D. Eylon, V. Bondarchuk and D.G. Savvakin: Defect Diffus. Forum, 2008, vol. 277, pp. 177-85.10.4028/www.scientific.net/DDF.277.177 ↗
14. O.M. Ivasishin and D.G. Savvakin: Key Eng. Mater., 2010, vol. 436, pp. 113-21.10.4028/www.scientific.net/KEM.436.113 ↗
15. S.-Y. Lee, Y. Iijima and K.-I. Hirano: Mater. Trans. JIM, 1991, vol. 32, pp. 451-56.10.2320/matertrans1989.32.451 ↗
16. G. Neumann and C. Tuijn: Self-diffusion and impurity diffusion in pure metals: handbook of experimental data. Pergamon, Amsterdam, 2009, p. 182.
17. G. Lütjering and J.C. Williams: Titanium. Springer-Verlag, Berlin, 2003, pp. 43-44.10.1007/978-3-540-71398-2 ↗
18. Z. Liu and G. Welsch: Metall. Mater. Trans. A, 1991, vol. 22A, pp. 946-48.10.1007/BF02659006 ↗
19. R.P. Baron, F.E. Wawner and J.A. Wert: Scripta Mater., 1998, vol. 39, pp. 269-75.10.1016/S1359-6462(98)00161-4 ↗
20. I.-H. Oh, N. Nomura, N. Masahashi and S. Hanada: Scripta Mater., 2003, vol. 49, pp. 1197-202.10.1016/j.scriptamat.2003.08.018 ↗
21. S. Luo, Y. Yang, G. Schaffer and M. Qian: J. Mater. Process. Technol., 2014, vol. 214, pp. 660-66.10.1016/j.jmatprotec.2013.10.010 ↗
22. H.-C. Kim, D.-K. Kim, K.-D. Woo, I.-Y. Ko and I.-J. Shon: Int. J. Refract. Met. Hard Mater., 2008, vol. 26, pp. 48-54.10.1016/j.ijrmhm.2007.01.006 ↗
23. G. Upadhyaya: Mater. Chem. Phys., 2001, vol. 67, pp. 1-5.10.1016/S0254-0584(00)00411-9 ↗
24. H.C. Pavanati, A.M. Maliska, A.N. Klein and J.L.R. Muzart: Mater. Res., 2007, vol. 10, pp. 87-93.10.1590/S1516-14392007000100019 ↗
25. Z. Liu and G. Welsch: Metall. Trans. A, 1988, vol. 19, pp. 527-42.10.1007/BF02649267 ↗
26. R. German: Sintering: from Empirical Observations to Scientific Principles. Butterworth-Heinemann, Amsterdam, 2014, pp. 195-99.
27. O. Lame, D. Bellet, M. Di Michiel and D. Bouvard: Acta Mater., 2004, vol. 52, pp. 977-84.10.1016/j.actamat.2003.10.032 ↗
28. T. Takahashi, Y. Minamino and M. Komatsu: Mater. Trans. JIM, 2008, vol. 49, pp. 125-32.10.2320/matertrans.MRA2007110 ↗
29. W. Sprengel, T. Yamada and H. Nakajima: Defect Diffus. Forum, 1997, vol. 143, pp. 431-36.10.4028/www.scientific.net/DDF.143-147.431 ↗
30. S.-Y. Lee, O. Taguchi, and Y. Iijima: Mater. Trans. JIM, 2010, vol. 51, pp. 1809–13.10.2320/matertrans.M2010225 ↗
31. U. Gerold and C. Herzig: Defect Diffus. Forum, 1997, vol. 143, pp. 437-42.10.4028/www.scientific.net/DDF.143-147.437 ↗
32. Y. Mishin and C. Herzig: Acta Mater., 2000, vol. 48, pp. 589-623.10.1016/S1359-6454(99)00400-0 ↗