journal article·2000-12

Deformation behavior of a Ni3Al(B,Zr) alloy during cold rolling: Part I. changes in order and structure

B. Bhattacharya, R. K. Ray

Publisher page

Abstract

A hypostoichiometric Ni3Al(B,Zr) alloy was homogenized and cold rolled by amounts ranging from 25 to 73 pct. The alloy consisted of two phases—a partially ordered γ′ phase (L12) and a Ni-rich fcc solid solution (γ). On deforming the alloy by rolling at room temperature, the order parameter showed a gradual change. In fact, between 35 and 45 pct deformation, the order characteristic of the L12 structure changed into that of a DO22 structure. The possibility of transition from L12 to DO22 structure is also corroborated from strain parameter, microhardness, and detailed x-ray diffraction (XRD) measurements. This structural transformation is accompanied by a change in the deformation mode (from slip to twinning), as is evident from the relevant microstructures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Microstructure and mechanical properties · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. K. Aoki and O. Izumi: J. Jpn. Inst. Met., 1972, vol. 43, p. 1190.10.2320/jinstmet1952.43.12_1190 ↗
2. C.T. Liu, C.L. White, and J.A. Horton: Acta Metall., 1985, vol. 33, p. 203.
3. J. Ball and G. Gottstein: Intermetallics, 1993, vol. 1, p. 171.10.1016/0966-9795(93)90012-K ↗
4. S. Ghosh Chowdhury, R.K. Ray, and A.K. Jena: Scripta Metall. Mater., 1995, vol. 32, p. 213.10.1016/S0956-716X(99)80039-9 ↗
5. S. Ghosh Chowdhury, R.K. Ray, and A.K. Jena: Scripta Metall. Mater., 1995, vol. 32, p. 1501.10.1016/0956-716X(95)00195-2 ↗
6. R. Ramesh, R. Vasudevan, B. Pathiraj, and B. H. Kolster: J. Mater. Sci., 1992, vol. 27, p. 270.10.1007/BF02403673 ↗
7. B.D. Cullity: Elements of X-ray Diffraction, Addison-Wesley, New York, NY, 1978.
8. Binary Alloy Phase Diagram, T.B. Massalski et al., eds., ASM, Metals Park, OH, 1986, vol. 1.
9. J. Ball, B. Zeumer, and G. Gottstein: Intermetallics, 1995, vol. 3, p. 209.10.1016/0966-9795(95)98932-X ↗
10. B. Chalmers: Trans. AIME, 1954, vol. 200, p. 519.
11. C.L. Corey and D.I. Potter: J. Appl. Phys., 1967, vol. 38, p. 3894.10.1063/1.1709036 ↗
12. J.P. Clark and G.P. Mohanty: Scripta Metall., 1974, vol. 8, p. 959.10.1016/0036-9748(74)90392-5 ↗
13. S. Ghosh Choudhury, R.K. Ray, and A.K. Jena: Mater. Sci. Eng. A, 1998, vol. A246, p. 289.10.1016/S0921-5093(97)00739-9 ↗
14. V.K. Sikka: MRS Symp. Proc., 1989, vol. 133, p. 487.10.1557/PROC-133-487 ↗
15. E.P. George, C.T. Liu, and D.P. Pope: Scripta Metall. Mater., 1992, vol. 27, p.483.10.1016/0956-716X(92)90527-L ↗
16. Y. Gu, D. Lin (T.L. Lin), and J. Guo: Scripta Mater., 1996, vol. 35, p. 609.10.1016/1359-6462(96)00187-X ↗
17. D.E. Albert and G.T. Gray: Phil. Mag. A, 1994, vol. 70, p. 145.10.1080/01418619408242542 ↗
18. D.E. Albert and G.T. Gray: Phil. Mag. A, 1995, vol. 71, p. 473.10.1080/01418619508244463 ↗
19. H. Sato and R.S. Toth: in Alloying Behaviour and Effects in Concentrated Solid Solution, T.B. Massalski, ed., Gordon and Breach, 1965, p. 295.
20. H.J. Beattie: in Intermetallic Compounds, J.H. Westbrook, eds., Wiley & Sons Inc., New York, NY, 1967, p. 144.
21. M. Yamaguchi, S.R. Nishitani, and Y. Shirai: in High Temperature Aluminides and Intermetallics, S.H. Whang, C.T. Liu, D.P. Pope, and J.O. Stiegler, eds., TMS, Warrendale, PA, 1990, p. 63.
22. M.H. Yoo, C.L. Fu, and J.K. Lee: MRS Symp. Proc., 1989, vol. 133, p. 189.10.1557/PROC-133-189 ↗
23. M. Yamaguchi, Y. Umakoshi, and T. Yamane: Phil. Mag., 1987, vol. A55, p. 301.10.1080/01418618708209869 ↗
24. S. Ghosh Chowdhury: Ph.D. Dissertation, IIT, Kanpur, 1995.
25. S. Ghosh Chowdhury: Phil. Mag. Lett., 1996, vol. 74, p. 327.10.1080/095008396180047 ↗
26. O. Noguchi, Y. Oya, and T. Suzuki: Metall. Trans. A, 1981, vol. A12, p. 1647–53.10.1007/BF02643570 ↗