journal article·2014-08

Study on Microstructures of Al-4 wt pct V Master Alloys

Yi Meng, Jianzhong Cui, Zhihao Zhao, Yubo Zuo

Publisher page

Abstract

Aluminum (Al)-V master alloys have attracted attention, because they can potentially be efficient grain refiners for wrought aluminum alloys. In this paper, the microstructure and factors affecting the microstructure of Al-4 wt pct V master alloys were investigated by means of controlled melting and casting processes followed by structure examination. The results showed that the type and morphology of the V-containing phases in Al-V master alloys were strongly affected by the temperature of the melt, concentration of vanadium in solution in the melt and the cooling conditions. Two main V-containing phases, Al3V and Al10V, which have different shapes, were found in the alloys prepared by rapid solidification. The Al3V phase formed when there were both a high temperature (1273 K to 1673 K (1000 °C to 1400 °C)) and a relatively high vanadium content of 3 to 4 wt pct, while the Al10V phase formed at a low temperature (<1373 K (1100 °C)) or a low vanadium content in the range of 1 to 3 wt pct. The results also showed that the type of V-containing phase that formed in the Al-4 wt pct V master alloy was determined by the instantaneous vanadium content.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Metallurgical Processes and Thermodynamics · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. X. Wang: J. Alloys Compd., 2005, vol. 403, pp. 283-87.10.1016/j.jallcom.2005.04.204 ↗
2. P.S. Cooper, and M.A. Kearns: Mater. Sci. Forum, 1996, vol. 217, pp. 141-46.10.4028/www.scientific.net/MSF.217-222.141 ↗
3. P.K. Rajagopalan, I.G. Sharma, and T.S. Krishnan: J. Alloys Compd., 1999, vol. 285, pp. 212-15.10.1016/S0925-8388(98)00754-3 ↗
4. S. Tangen, K. Sjlstan, T. Furu, and E.Nes: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 2970-83.10.1007/s11661-010-0265-8 ↗
5. B.D. Warr, G.W. Delamore, and R.W. Smith: Metall. Trans. B, 1975, vol. 6B, pp. 625-29.10.1007/BF02913858 ↗
6. Donald, and J. Beerntsen: Metall. Trans. B, 1977, vol. 8B, pp. 687-88.
7. H.A. Elhadari, H.A. Patel, D.L. Chen, and W. Kasprzak: Mater. Sci. Eng. A, 2011, vol. 528A, pp. 8128-38.10.1016/j.msea.2011.07.018 ↗
8. V.M.J.Sharma, K.S. Kumar, B.N. Rao, and S.D. Pathak: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 3186-95.10.1007/s11661-009-0062-4 ↗
9. R.R. Moskalyk, and A.M. Alfantazi: Miner. Eng., 2003, vol. 16, pp. 793-805.10.1016/S0892-6875(03)00213-9 ↗
10. C.M. Allen, K. A. Q. O’Reilly, P. V. Evans, and B. Cantor: Acta. Mater., 1999, vol. 47, pp. 4387-4403.10.1016/S1359-6454(99)00250-5 ↗
11. S. Camero, E. S. Puchi. G, and Gonzalez: J. Mater. Sci., 2006, vol. 41, pp. 7361-73.10.1007/s10853-006-0794-0 ↗
12. Y. Meng, J.Z. Cui, Z.H. Zhao, and Y.B. Zuo: J. Alloys Compd., 2013, vol. 573, pp. 102-11.10.1016/j.jallcom.2013.03.239 ↗
13. C. Vivès: Metall. Mater. Trans. B, 1996, vol. 27B, pp. 457-64.10.1007/BF02914910 ↗
14. J.L. Murray: Bull. Alloy Phase Diagr., 1989, vol. 10, pp. 351-57.10.1007/BF02877591 ↗
15. A.D. McNaught, and A. Wilkinson: Compendium of Chemical Terminology, 2nd ed., p. 41, International Union of Pure and Applied Chemistry, Zurich, 1997.
16. E. R. Robert: Physical Metallurgy Principles, 3rd ed., pp. 185-87, Eastern Press Pvt. Ltd., Bangalore, 1991.