Modeling the Spray Forming of H13 Steel Tooling
Source abstract
Abstract
On the basis of a numerical model, the temperature and liquid fraction of spray-formed H13 tool steel are calculated as a function of time. Results show that a preheated substrate at the appropriate temperature can lead to very low porosity by increasing the liquid fraction in the deposited steel. The calculated cooling rate can lead to a microstructure consisting of martensite, lower bainite, retained austenite, and proeutectoid carbides in as-spray-formed material. In the temperature range between the solidus and liquidus temperatures, the calculated temperature of the spray-formed material increases with increasing substrate preheat temperature, resulting in a very low porosity by increasing the liquid fraction of the deposited steel. In the temperature region where austenite decomposition occurs, the substrate preheat temperature has a negligible influence on the cooling rate of the spray-formed material. On the basis of the calculated results, it is possible to generate sufficient liquid fraction during spray forming by using a high growth rate of the deposit without preheating the substrate, and the growth rate of the deposit has almost no influence on the cooling rate in the temperature region of austenite decomposition.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. K.M. McHugh, J.E. Folkestad: Proc. SDMA 2003 and ICSF V, Bremen, Germany, 2003, pp. 5–123
2. K.M. McHugh: in Solidification 1998, S.P. Marsh, J.A. Dantzig, R. Trivedi, W. Hofmeister, M.G. Chu, E.J. Lavernia, and J.H. Chun, eds., TMS, Warrendale, PA, 1998, p. 427
3. Source Book on Industrial Alloy and Engineering Data, ASM, Materials Park, OH, 1987, pp. 255–67
4. E.S. Lee, W.J. Park, K.H. Baik, S. Ahn: Scripta Mater., 1998, vol. 39, pp. 1133–3810.1016/S1359-6462(98)00270-X ↗
5. E.J. Lavernia, Y. Wu: Spray Atomization and Deposition, John Wiley & Sons, Inc., New York, NY, 1996, pp. 343–70
6. Q. Xu, E.J. Lavernia: Acta Mater., 2001, vol. 49, pp. 3849–61.10.1016/S1359-6454(01)00253-1 ↗
7. K. Lubanska: JOM, 1970, vol. 22(2), pp. 45–4910.1007/BF03355938 ↗
8. P.S. Grant, B. Cantor, L. Katgerman: Acta Metall. Mater., 1993, vol. 41, pp. 3109–1810.1016/0956-7151(93)90040-Y ↗
9. Q. Xu, V.V. Gupta, E.J. Lavernia: Metall. Mater. Trans. B, 1999, vol. 30B, pp. 527–3910.1007/s11663-999-0086-6 ↗
10. Q. Xu, V.V. Gupta, E.J. Lavernia: Acta Mater., 2000, vol. 48, pp. 835–4910.1016/S1359-6454(99)00389-4 ↗
11. S. Annavarapu, D. Apelian, A. Lawley: Metall. Trans. A, 1990, vol. 21A, pp. 3237–5610.1007/BF02647318 ↗
12. B.C. Moon, Z.H. Lee, D.R. White, E.J. Lavernia: J. Mater. Res., 2000, vol. 15, pp. 1669–7810.1557/JMR.2000.0241 ↗
13. Crucible Tool Co., private communication, Syracuse, NY, 2004
14. S. Annavarapu, R. Doherty: Int. J. Powder Metall., 1993, vol. 29, pp. 331–43
15. Y.J. Lin, K.M. McHugh, Y.Z. Zhou, E.J. Lavernia: Scripta Mater., 2006, vol. 55, pp. 581–8410.1016/j.scriptamat.2006.06.020 ↗
16. G.A. Roberts and R.A. Cary: Tool Steels, ASM, Materials Park, OH, 1980, pp. 187 and 579–89