Development and Processing of Novel Aluminum Powder Metallurgy Materials for Heat Sink Applications
Source abstract
Abstract
The objective of this research was to design aluminum powder metallurgy (PM) alloys and processing strategies that yielded sintered products with thermal properties that rivaled those of the cast and wrought aluminum alloys traditionally employed in heat sink manufacturing. Research has emphasized PM alloys within the Al-Mg-Sn system. In one sub-theme of research, the general processing response of each PM alloy was investigated through a combination of sintering trials, sintered density measurements, and microstructural assessments. In the second, the thermal properties of sintered products were studied in detail. Thermal conductivity was first determined using a calculated approach through discrete measurements of specific heat capacity, thermal diffusivity, and density and subsequently verified using a transient plane source technique on larger specimens. Experimental PM alloys achieved >99 pct theoretical density and exhibited thermal conductivity that ranged from 179 to 225 W/m K. Thermal performance was largely dominated by the amount of magnesium present within the aluminum grains and, in turn, bulk alloy chemistry. Data confirmed that the novel PM alloys were highly competitive with even the most advanced heat sink materials such as wrought 6063 and 6061.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Y.S. Lerner, V.E. Kouznetsov, G.V. Panteleev and J.T. Berry: Foundry Manage. Technol., 2005, vol. 133, no. 3, pp. 46-57.
2. R.Y. Jou: Key Eng. Mater., 2010, vol. 419-420, pp. 345-348.
3. K.P. Keller: University of North Carolina, Chapel Hill, NC, 1997, unpublished research.
4. C. Alvin, W, Chu, C.-H. Cheng, and J.-T. Teng: 6 th Microsyst. Packag. Assembl. Circuits Technol. Conf., Tai Pei, Taiwan, 2011, pp. 397–400.
5. S. Lee: 11 th IEEE Semi-Therm TM Symp., Laconia, NH, 1995, pp. 48–54.
6. M.C. Yang: 17 th IEEE Semi-Therm TM Symp., Fort Worth, TX, 2001, pp. 102–06.
7. T.M. Tritt: Thermal Conductivity: Theory, Properties, and Applications, Academic/Plenum Publishers, New York, NY, 2004, pp. 22-28.10.1007/b136496 ↗
8. R.P. Tye: Thermal Conductivity, vol. 2, Academic Press, New York, NY, 1969, pp. 218-219.
9. J. Y. Barghout: Mater. Sci. Forum, 1996, vol. 217, no. 2, pp. 975-980.10.4028/www.scientific.net/MSF.217-222.975 ↗
10. P.M. Geffroy, J.D. Mathias and J.F. Silvain: Adv. Eng. Mater., 2008, vol. 10, no. 4, pp. 400-405.10.1002/adem.200700285 ↗
11. R. Saraswati and F.J. Polese: Proc. Int. Symp. Microelectron., vol. 3582, Society of Photo-Optical Instrumentation Engineers, Bellingham, WA, 1998, pp. 681–86.
12. L.-K. Tan and J. Ma: I-Therm 2004, 9 th , Intersoc. Conf. Therm. Thermomech. Phenom. Electron. Syst., vol. 1, 2004, pp. 451–54.
13. ASM: ASM Metals Handbook, vol. 2, ASM International, Materials Park, OH, 1990, pp. 103–71.
14. G.S. Upadhyaya: Powder Metall. Technologies, Cambridge International Science Publishing, Cambridge, 1997, pp. 1–3.
15. W.G.E. Mosher, G.J. Kipouros, W.F. Caley, I.W. Donaldson and D.P. Bishop: Powder Metall., 2011, vol. 54, no. 3, pp. 366-375.10.1179/003258910X12678035166773 ↗
16. E.J. Lavernia and N.J. Grant: J. Mater. Sci., 1987, vol. 22, pp. 1521-1529.10.1007/BF01132370 ↗
17. J.R. Pickens: J. Mater. Sci., 1981, vol. 16, pp. 1437-1457.10.1007/BF02396863 ↗
18. I.A. MacAskill, R.L. Hexemer Jr, I.W. Donaldson and D.P. Bishop: J. Mater. Process. Technol., 2010, vol. 210, no. 15, pp. 2252-2260.10.1016/j.jmatprotec.2010.08.018 ↗
19. D.P. Bishop, B. Hofmann, and K.R. Couchman: in Advances in Powder Metallurgy and Particulate Materials, H. Ferguson and D.T. Whychell, eds., MPIF, New York, 2000, pp. 87–100.
20. ASTM: Annual Book of ASTM Standards, vol. 2.05, Standard B595-11, ASTM International, West Conshohocken, PA, 2005, pp. 1–4.
21. C.D. Boland, R.L. Hexemer Jr., I.W. Donaldson, and D.P. Bishop: Int. J. Powder Met., 2011, vol.47, no.1, pp.39-48.
22. K. Kondoh, A. Kimura, Y. Takeda and R. Watanabe: J. Japan Inst. Metals, vol.64, no.11, 2000, pp.1106-1112.10.2320/jinstmet1952.64.11_1106 ↗
23. T.B. Sercombe and G.B. Schaffer: Mater. Sci. Eng. A, 1999, vol. A268, pp.32-39.10.1016/S0921-5093(99)00126-4 ↗
24. A. Nylund and I. Olefjord: Powder Metall., 1993, vol. 36, no. 3, pp. 193-197.10.1179/pom.1993.36.3.193 ↗
25. Y.M. Kim, W.M. Griffith and F.H. Froes: J. Metals, 1985, vol. 37, no. 8, pp. 27-33.
26. K. Kondoh: Powder Metall., 2001, vol. 44, no. 2, pp. 161-164.10.1179/003258901666310 ↗
27. P. Villars, A. Prince, and H. Okamoto: Handbook of Ternary Alloy Phase Diagrams, vol. 4, ASM International, Materials Park, OH, 1995, pp. 3918-3922.
28. Y.S. Touloukian and C.Y. Ho: Properties of Aluminum and Aluminum Alloys, No. 21, Thermophysical Properties Research Center, Perdue University, West Lafayette, IN, 1973, pp. 46–64.
29. ASM: ASM Metals Handbook, vol. 2, ASM International, Materials Park, OH, 2004, pp. 152-177.
30. C. Lall and W. Heath: Int. J. Powder Metall., 2000, vol. 36, no. 6, pp. 41-43.