journal article·2008-06

Interpenetrating Hybrid Reinforcement in Al2O3 Short Fiber Preforms Infiltrated by Al-Si Alloys

Fernando Lasagni, Jorge Antonio Acuña, Hans Peter Degischer

Publisher page

Abstract

In this work, the effect of the Si content and its morphological features on the mechanical properties of different short fiber-reinforced Al-Si matrices is studied. Al-Si alloys with Si contents of 7 wt pct and more contain a percolating Si network in the as-cast condition. The addition of alumina fibers into these Al-Si matrices increases the mechanical properties by forming an interconnected Al2O3-Si network. Both elastic modulus and maximum strength (from tensile and compression tests) increase with increasing Si content, which reinforces the interpenetration. However, Si diffuses toward the fibers’ surface during solution treatment forming coarse Si particles, reducing considerably the connectivity of the Al2O3-Si-hybrid network and thus the mechanical properties of the composites. The mechanical properties of the Al2O3-Si network itself are studied by means of compression tests on extracted hybrid reinforcement samples and are related to the global behavior of the composites. The strength vs true strain curves depict a strain-controlled softening of the composite material, which proceeds the faster, the higher the interconnectivity of the hybrid reinforcement, due to the propagation of damage of the Al2O3-Si network.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. T.W. Clyne: in Comprehensive Composite Materials, A. Kelly and C. Zweben, eds., Elsevier Science Ltd., Oxford, United Kingdom, 2000, vol. 3, pp. 1–26
2. G. Requena, H.P. Degischer: Mater. Sci. Eng. A, 2006, vol. 420 (1–2), pp. 265–7510.1016/j.msea.2006.01.024 ↗
3. A. Schnabl, H.P. Degischer: Z. Metallkd., 2003, vol. 94 (6), pp. 743–4810.3139/146.030743 ↗
4. G.A. Edwards, K. Stiller, G.L. Dunlop, M.J. Couper: Acta Mater., 1998, vol 46 (11), pp. 3893–390410.1016/S1359-6454(98)00059-7 ↗
5. K. Mori, S. Maki, M. Ishiguro: Int. J. Mach. Tool Manuf., 2006, vol. 46 (15), pp. 1966–7110.1016/j.ijmachtools.2006.01.011 ↗
6. M. Zeren: J. Mater. Process. Technol., 2005, vol. 169 (2), pp. 292–9810.1016/j.jmatprotec.2005.03.009 ↗
7. N.E. Bekheet, R.M. Gadelrab, M.F. Salah, N.A. Abd El-Azim: Mater. Des., 2002, vol. 23 (2), pp. 153–5910.1016/S0261-3069(01)00072-3 ↗
8. I.J. Polmear: Light Alloys: Metallurgy of Light Metals, 3rd ed., Wiley, London, Great Britain, 1995, pp. 168–95
9. F. Lasagni, H.P. Degischer, M. Papakyriacou: Kovove Mater., 2006, vol. 44 (2), pp. 65–74
10. H.L. Cox: Br. J. Appl. Phys., 1952, vol. 3, pp. 73–7910.1088/0508-3443/3/3/302 ↗
11. J.O. Outwater: Modern Plastics, 1956, vol. 33, pp. 56–65
12. B.W. Rosen: Mechanics of Fibre Strengthening in Fibre Composite Materials, ASM, Metals Park, OH, 1960
13. N.F. Dow: “Study of Stresses Near Discontinuity in a Filament-Reinforced Composite Metal,” Report No. R635D61, Missile and Space Division, GE Co., PA, 1963
14. T. Clyne, P. Whithers: An Introduction to Metal Matrix Composites, Cambridge University Press, Cambridge, United Kingdom, 1993, pp. 1–4310.1017/CBO9780511623080 ↗
15. ASM Engineered Materials Reference Book, 2nd ed., M. Bauccio, ed., ASM INTERNATIONAL, Materials Park, OH, 1994
16. A. Dlouhy, G. Eggeler, N. Merk: Acta Metall. Mater., 1995, vol. 43 (2), pp. 535–5010.1016/0956-7151(94)00255-G ↗
17. F. Lasagni: Ph.D. Thesis, Vienna University of Technology, Vienna, 2006, pp. 56–61
18. L.J. Gibson, M.F. Ashby: Cellular Solids–Structure and Properties, Cambridge University Press, Cambridge, United Kingdom, 1997, pp. 175–8310.1017/CBO9781139878326.007 ↗
19. F. Lasagni, A. Lasagni, C. Holzapfel, F. Mücklich, H.P. Degischer: Adv. Eng. Mater., 2006, vol. 8 (8), pp. 719–2310.1002/adem.200500276 ↗
20. F.A. Lasagni, H.P. Degischer, M. Papakyriacou: Prakt. Metallogr., 2006, vol. 43 (10), pp. 505–1910.3139/147.100316 ↗
21. J. Valer Goñi, J.M. Rodriguez-Ibabe, J.J. Urcola: Scripta Mater., 1996, vol. 34 (3), pp. 483–8910.1016/0956-716X(95)00538-7 ↗
22. M.C. Flemings: Metall. Trans. A, 1991, vol. 22A, pp. 957–6210.1007/BF02661090 ↗
23. C.-H. Chiang, Y.A. Tsao Chi: Mater. Sci. Eng. A, 2006, vol. 417 (1–2), pp. 90–9810.1016/j.msea.2005.09.107 ↗
24. D.A. Lados, D. Apelian: Mater. Sci. Eng. A, 2004, vol. 385 (1–2), pp. 187–99
25. F. Lasagni, A. Lasagni, E. Marks, C. Holzapfel, F. Mücklich, H.P. Degischer: Acta Mater., 2007, vol. 55, pp. 3875–8210.1016/j.actamat.2007.03.004 ↗