Effects of Composition Changes on Strength, Bend Ductility, Toughness, and Flex-Bending Fatigue of Iron-Based Metallic Glass Ribbons
Source abstract
Abstract
Vickers microhardness, nanohardness, tension tests, notch and fatigue precrack toughness tests, and controlled monotonic and cyclic strain experiments via bending over mandrels of different diameter have been performed on two different chemistries of Fe-based (Fe-Si-B) metallic glass ribbons. The tensile strengths of Fe73.5Cu1Nb3Si13.5B9 were 2000 ± 100 MPa and 1640 ± 35 MPa for Fe78Si9B13, which is consistent with the microhardness trends. High notch toughness (e.g., 89 ± 0.9 MPam1/2 - Fe73.5Cu1Nb3Si13.5B9; 94.5 ± 5.5 MPam1/2 - Fe78Si9B13) and fatigue precracked toughness of 76 MPam1/2 for the Fe73.5Cu1Nb3Si13.5B9 and 80 MPam1/2 for the Fe78Si9B13 were obtained. Flex-bending cyclic fatigue tests revealed a fatigue limit of 385 MPa for Fe78Si9B13 ribbons, whereas the more brittle behavior of the Fe73.5Cu1Nb3Si13.5B9 ribbons prevented the generation of flex-bending fatigue data. These results are discussed in the light of recent work on metallic glass systems.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Electromagnetic wave absorption materials · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. W. Klement, R.H. Willens, and P. Duwez: Nature, 1960, vol. 187, pp. 869–75.10.1038/187869b0 ↗
2. A.L. Greer and E. Ma: MRS Bull., 2007, vol. 32, pp. 611–15.10.1557/mrs2007.121 ↗
3. A. Inoue, A. Takeuchi, and B.L. Shen: Mater. Trans., 2001, vol. 42, pp. 970–78.10.2320/matertrans.42.970 ↗
4. V. Ponnambalam, S.J. Poon, G.J. Shiflet, V.M. Keppens, R. Taylor, and G. Petculescu: Appl. Phys. Lett., 2003, vol. 83, p. 1131.10.1063/1.1599636 ↗
5. A. Inoue, B.L. Shen, A.R. Yavari, and A.L. Greer: J. Mater. Res., 2003, vol. 18, pp.1487–93.10.1557/JMR.2003.0205 ↗
6. V. Ponnambalam, S.J. Poon, and G.J. Shiflet: J. Mater. Res., 2004, vol. 19, pp. 1320–26.10.1557/JMR.2004.0176 ↗
7. Z.P. Lu, C.T. Liu, J.R. Thompson, and W.D. Porter: Phys. Rev. Lett., 2004, vol. 92, p. 245503.10.1103/PhysRevLett.92.245503 ↗
8. M. Stoica, J. Eckert, S. Roth, Z.F. Zhang, L. Schultz, and W.H. Wang: Intermetallics, 2005, vol. 13, pp. 764–68.10.1016/j.intermet.2004.12.016 ↗
9. T. Zhang, F.J. Liu, S.J. Pang, and R. Li: Mater. Trans., 2007, vol. 48, pp. 1157–61.10.2320/matertrans.48.1157 ↗
10. D.C. Qiao, G.Y. Wang, P.K. Liaw, V. Ponnambalam, S.J. Poon, and G.J. Shiflet: J. Mater. Res., 2007, vol. 22, no. 2, pp. 544–50.10.1557/jmr.2007.0047 ↗
11. J.J. Lewandowski, X.J. Gu, A. Shamimi Nouri, S.J. Poon, and G.J. Shiflet: Appl. Phys. Lett., 2008, vol. 92, p. 091918.10.1063/1.2890489 ↗
12. A.R. Wildes, N. Cowlam, Q.A. Pankhurst, S. Al-Heniti, and M.R.J. Gibbs: Europhys. Lett., 2004, vol. 68, no. 4, pp. 582–88.10.1209/epl/i2004-10230-6 ↗
13. G. Marsh: Mater. Today, 2003, vol. 6, pp. 38–43.
14. Y.T. Wang, Y.K. Fang, M.X. Pan, D.Q. Zhao, B.S. Han, and W.H. Wang: J. Non-Cryst. Solids, 2006, vol. 352, pp. 2925–28.10.1016/j.jnoncrysol.2006.01.098 ↗
15. J.Y. Bang and R.Y. Lee: J. Mater. Sci., 1991, vol. 26, pp. 4961–65.10.1007/BF00549877 ↗
16. J.M. Li, M.X. Quan, and Z.Q. Hu: Appl Phys Lett.,1996, vol. 69, no. 11, pp. 1559–61.10.1063/1.117061 ↗
17. P. Allia, P. Tiberto, M. Baricco, and F. Vinai: Appl. Phys. Lett., 1993, vol. 63, no. 20, pp. 2759–61.10.1063/1.110326 ↗
18. K.Y. He, M.L. Sui, Y. Liu, and B.F. Zhao: J. Appl. Phys.,1994, vol. 75, no. 7, pp. 3684–86.10.1063/1.356086 ↗
19. P. Tiberto, V. Basso, C. Beatrice, and G. Bertotti: J. Magn. Magn. Mater., 1996, vol. 160, pp. 271–72.10.1016/0304-8853(96)00194-1 ↗
20. Y.K. Chang, Y.H. Cheng, W.F. Pong, M.H. Tsai, Y.Y. Chen, J.W. Chiou, J.C. Jan, F.Z. Chien, P.K. Tseng, T.E. Dann, M.S. Leu, and T.S. Chin: J. Electron. Spectrosc., 2001, vols. 114–116, pp. 831–38.10.1016/S0368-2048(00)00273-5 ↗
21. ASTM E8M-99, Standard Test Methods for Tension Testing of Metallic Materials [Metric], 1999.
22. H. Tada, P.C. Paris, and G.R. Irwin: The Stress Analysis of Crack Handbook, 2nd ed., ASME, New York, NY, 1985.
23. G.N. Morscher and H. Sayir: Mater. Sci. Eng. A, 1995, vol. 190, pp. 267–74.10.1016/0921-5093(94)09612-Z ↗
24. W. Engelmaier: ASTM STP 753, 1981.
25. ASTM E 796-94, Annual Book of ASTM Standards, 1994.
26. H.D. Merchant and S.J. Clouser: IPC Flex Circuit Conf., Minneapolis, MN, 1996.
27. H.D. Merchant, M.G. Minor, and Y.L. Liu: J. Electron. Mater., 1999, vol. 28, no. 9, pp. 998–1007.10.1007/s11664-999-0176-x ↗
28. H.D. Merchant, J.T. Wang, L.A. Glannuzzi, and Y.L. Liu: Circuit World, 2000, vol. 26, no. 4, pp. 7–14.10.1108/03056120010378806 ↗
29. J.J. Lewandowski, R. Varadarajan, B. Smith, C. Tuma, M. Shazly, and L.O. Vatamanu: Mater. Sci. Eng. A, 2008, vol. 486, nos. 1–2, pp. 447–54.10.1016/j.msea.2007.11.016 ↗
30. J.J. Lewandowski, R. Varadarajan, and B. Smith: Mater. Sci. Eng. A, 2008, vol. 492, pp. 191–98.10.1016/j.msea.2008.03.016 ↗
31. J.A. Verduzco, R.J. Hand, and H.A. Davies: Int. J. Fatigue, 2002, vol. 24, pp. 1089–94.10.1016/S0142-1123(02)00014-2 ↗
32. A.T. Alpas, L. Edwards, and C.N. Reid: Metall. Trans. A, 1989, vol. 20A, pp. 1395–409.10.1007/BF02665497 ↗
33. H.S. Chen: Rep. Prog. Phys., 1980, vol. 43, pp. 353–400.10.1088/0034-4885/43/4/001 ↗
34. P. Lowhaphandu, S.L. Montgomery, and J.J. Lewandowski: Scripta Metall. Mater., 1999, vol. 41, pp. 19–24.10.1016/S1359-6462(99)00128-1 ↗
35. J.J. Lewandowski and P. Lowhaphandu: Philos. Mag. A, 2002, vol. 82, no. 17, pp. 3427–41.10.1080/01418610208240453 ↗
36. M. Calvo: J. Mater. Sci., 1989, vol. 24, pp. 1801–08.10.1007/BF01105708 ↗
37. X.F. Li, K.F. Zhang, G.F. Wang, and W.B. Han: J. Non-Cryst. Solids, 2008, vol. 354, pp. 1061–65.10.1016/j.jnoncrysol.2007.08.023 ↗
38. R.D. Conner, W.L. Johnson, N.E. Paton, and W.D. Nix: J. Appl. Phys., 2003, vol. 94, no. 2, p. 904.10.1063/1.1582555 ↗
39. J.F. Knott: Fundamental of Fracture Mechanics, Butterworth and Co., London, UK, 1981.
40. L.A. Davis: Metall. Trans. A, 1979, vol. 10A, pp. 235–40.10.1007/BF02817633 ↗
41. V. Ocelik: J. Mater. Sci., 1987, vol. 22, pp. 3732–37.10.1007/BF01161486 ↗
42. E.P. Barth, F. Spaepen, R. Bye, and S.K. Das: Acta Mater., 1997, vol. 45, pp. 423–28.10.1016/S1359-6454(96)00160-7 ↗
43. M.E. Launey, D.C. Hofmann, W.L. Johnson, and R.O. Ritchie: Proc. Natl. Acad. Sci. U S A, 2009, vol. 106, no. 13, pp. 4986–91.10.1073/pnas.0900740106 ↗
44. B.C. Menzel and R.H. Dauskardt: Acta Mater., 2006, vol. 54, pp. 935–43.10.1016/j.actamat.2005.10.021 ↗
45. B.C. Menzel and R.H. Dauskardt: Acta Mater., 2008, vol. 56, pp. 2955–65.10.1016/j.actamat.2008.02.029 ↗
46. G.Y. Wang, P.K. Liaw, and M.L. Morrison: Intermetallics, 2009, vol. 17, pp. 579–90.10.1016/j.intermet.2009.01.017 ↗