journal article·2008-05

Effects of Ti Addition on the Liquid-Phase Separation of Cu71Cr29 Alloy during Rapid Cooling

Zhanbo Sun, Juan Guo, Yan Li, Yaomin Zhu, Qian Li, Xiaoping Song

Publisher page

Abstract

The effects of Ti addition on the liquid-phase separation of Cu71Cr29 alloy have been investigated. It is revealed that Ti addition can partly suppress the liquid-phase separation of the alloy melts, resulting in refining of Cr-rich particles formed after liquid-phase separation during rapid cooling. Nanoscaled Cr2Ti and Cu4Ti phases precipitate in the annealed Cu-Cr-Ti ribbons when Ti content attains 2.5 pct. The thermodynamic analyses indicate that the large positive mixing heat between Cu and Cr is reduced by the addition of Ti, leading to the liquid-phase separation occurring at a lower temperature and being driven by a smaller force. However, more Cr and Ti dissolve in Cu solid solution when Ti content is more than 3 pct, and as a result, the electrical resistivity of the ribbons is increased sharply.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Metallurgical and Alloy Processes · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. P.G. Slade: IEEE Trans. Comp. Packag. Mannf. Tech., 1994, vol. 17 (1), pp. 96–10610.1109/95.296374 ↗
2. Y. Wang, B. Ding: IEEE Trans. Comp. Packag. Mannf. Tech., 1999, vol. 22 (3), pp. 467–7210.1109/6144.796552 ↗
3. B. Ding, Z. Yang, X. Wang: IEEE Trans., CPMT, 1996, vol. 19 (1), pp. 76–81
4. W.F. Rieder, M. Schussek, W. Glatzle: IEEE Trans. CHMT, 1989, vol. 12 (2), pp. 273–83
5. S. Spaic, M. Komac, A. Fetahagic: Mat. Sci. Tech., 1989, vol. 5 (11), pp. 1069–7310.1179/mst.1989.5.11.1069 ↗
6. B.J. Ding: PhD dissertation, Xi’an Jiaotong University, 1990
7. Z.M. Yang: PhD dissertation, Xi’an Jiaotong University, 1996
8. S.X. Xiu, J.Y. Zou, J.J. He: High-Votage Electr. Equip., 2000, vol. 36 (3), pp. 40–42
9. F. Zhao, Z.M. Yang, B.J. Ding: Trans. Nonferrous Met. Soc. China, 2000, vol. 10 (1), pp. 73–75
10. H. Cao, A.P. Xian: Chin. J. Nonferrous Met., 2002, vol. 12 (3), pp. 570–74
11. M.J. Tenwick, H.A. Davies: Mater. Sci. Eng., 1988, vol. 98, pp. 543–4610.1016/0025-5416(88)90226-1 ↗
12. P. Liu, B.X. Kang, X.G. Cao, J.L. Huang, H.C. Gu: J. Mate. Sci., 2000, vol. 35 (7), pp. 1691–9410.1023/A:1004760014886 ↗
13. Z.B. Sun, C.Y. Zhang, Y.M. Zhu, Z.M. Yang, B.J. Ding, X.P. Song: J. All. Comp., 2003, vol. 361 (1–2), pp. 165–6810.1016/S0925-8388(03)00425-0 ↗
14. Z.M. Zhou, Y.P. Wang, J. Gao, M. Kolbe: Mater. Sci. Eng. A, 2005, vol. 398 (1–2), pp. 318–2210.1016/j.msea.2005.03.095 ↗
15. Z.M. Yang, Q.L. Zhang, C.Y. Zhang, Y. Sun, B.J. Ding: Phys. Lett. A, 2006, vol. 353 (1), pp. 98–10010.1016/j.physleta.2005.12.023 ↗
16. Z.B. Sun, Y.H. Wang, J. Guo, Y.M. Zhu, X.P. Song, R.H. Zhu: Mater. Sci. Eng. A, 2007, vols. 452–453, pp. 411–1610.1016/j.msea.2006.10.112 ↗
17. Z.B. Sun, X.P. Song, Z.D. Hu, G.Y. Liang, S. Yang, R.F. Cochrane: J. All. Comp., 2001, vol. 319 (1–2), pp. 276–7910.1016/S0925-8388(01)00884-2 ↗
18. K.C.H. Kumar, I. Ansara, P. Wollants, L. Delaey: Z. Metallkd, 1996, vol. 87 (8), pp. 666–72
19. W. Zhuang, J. Shen, Y. Liu, L. Ling, S. Shang, Y. Du, J.C. Schuster: Z. Metallkd., 2000, vol. 91 (2), pp. 121–27
20. K.T. Jacob, S. Priya, Y. Waseda: Z. Metallkd, 2000, vol. 91 (7), pp. 594–600
21. K.C. Chou: Calphad, 1995, vol. 19 (3), pp. 315–2510.1016/0364-5916(95)00029-E ↗
22. M.B. Robinson, D. Li, T.J. Rathz, G. Willims: J. Mater. Sci, 1999, vol. 34 (15), pp. 3747–5310.1023/A:1004688313591 ↗
23. S.P. Elder, A. Munitz, G.J. Abbaschian: Mat. Sci. Forum, 1989, vol. 50, pp. 137–5010.4028/www.scientific.net/MSF.50.137 ↗
24. C.D. Cao, G.P. Görler, D.M. Herlach, B. Wei: Mater. Sci. Eng. A, 2002, vol. 325 (1–2), pp. 503–1010.1016/S0921-5093(01)01756-7 ↗
25. C.D. Cao, D.M. Herlach, M. Kolbe, G.P. Görler, B. Wei: Scripta Mater., 2003, vol. 48 (1), pp. 5–910.1016/S1359-6462(02)00307-X ↗
26. H. Okamoto: Phase Diagrams for Binary alloys, ASM International, Materials Park, 2000, 282