journal article·2011-05

The Effect of Thermomechanical Processing on the Tensile, Fatigue, and Creep Behavior of Magnesium Alloy AM60

Z. Chen, J. Huang, R. F. Decker, S. E. Lebeau, L. R. Walker, O. B. Cavin, T. R. Watkins, C. J. Boehlert

Publisher page

Abstract

Tensile, fatigue, fracture toughness, and creep experiments were performed on a commercially available magnesium-aluminum alloy (AM60) after three processing treatments: (1) as-THIXOMOLDED (as-molded), (2) THIXOMOLDED then thermomechanically processed (TTMP), and (3) THIXOMOLDED then TTMP then annealed (annealed). The TTMP procedure resulted in a significantly reduced grain size and a tensile yield strength greater than twice that of the as-molded material without a debit in elongation to failure (e f ). The as-molded material exhibited the lowest strength, while the annealed material exhibited an intermediate strength but the highest e f (>1 pct). The TTMP and annealed materials exhibited fracture toughness values almost twice that of the as-molded material. The as-molded material exhibited the lowest fatigue threshold values and the lowest fatigue resistance. The annealed material exhibited the greatest fatigue resistance, and this was suggested to be related to its balance of tensile strength and ductility. The fatigue lives of each material were similar at both room temperature (RT) and 423 K (150 °C). The tensile-creep behavior was evaluated for applied stresses ranging between 20 and 75 MPa and temperatures between 373 and 473 K (100 and 200 °C). During both the fatigue and creep experiments, cracking preferentially occurred at grain boundaries. Overall, the results indicate that thermomechanical processing of AM60 dramatically improves the tensile, fracture toughness, and fatigue behavior, making this alloy attractive for structural applications. The reduced creep resistance after thermomechanical processing offers an opportunity for further research and development.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. S.E. LeBeau, M.W. Walukas, and R.F. Decker: Thixomat, Inc., Ann Arbor, MI; paper presented at Eurofond Congr., LaRochelle, France, 2004.
2. D.M. Walukas, R.F. Decker, R.E. Vining, and R.D. Carnahan: Report, Thixomat, Inc., Ann Arbor, MI.
3. R.F. Decker and S.E. LeBeau: Adv. Mater. Process., 2008, vol. 166, pp. 28–29.
4. S. LeBeau and D.M. Walukas: Thixomat, Inc., Ann Arbor, MI; paper presented at Plastics in Portable and Wireless Electronics, Mesa, AZ, 1999.
5. R.F. Decker, R.D. Carnahan, E. Babij, J. Mihelich, G. Spalding, and L. Thompson: Adv. Mater. Process., 1996, vol. 149, pp. 41–42.
6. G.A. Hartman and S.M. Russ: Metal Matrix Composites: Testing, Analysis and Failure Modes, ASTM, Philadelphia, PA, 1989, pp. 43–53.10.1520/STP22848S ↗
7. C.J. Boehlert, C.J. Cowen, S. Tamirisakandala, D.J. McEldowney, and D.B. Miracle: Scripta Mater., 2006, vol. 55, pp. 465–68.10.1016/j.scriptamat.2006.05.008 ↗
8. C.J. Cowen and C.J. Boehlert: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 26–34.10.1007/s11661-006-9004-6 ↗
9. J.P. Quast and C.J. Boehlert: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 529–36.10.1007/s11661-006-9074-5 ↗
10. C. Yan, R.X. Bai, Y.T. Gu, and W.J. Ma: J. Achiev. Mater. Manufact. Eng., 2008, vol. 31, pp. 398–401.
11. V.Y. Gertsman, J. Li, S. Xu, J.P. Thomson, and M. Sahoo: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1989–97.10.1007/s11661-005-0319-5 ↗
12. O. Kulyasova, R. Islamgaliev, B. Mingler, and M. Zehetbauer: Mater. Sci. Eng., A, 2009, vol. 503, pp. 176–80.10.1016/j.msea.2008.03.057 ↗
13. R.M. Wang, A. Eliezer, and E.M. Gutman: Mater. Sci. Eng., A, 2003, vol. 355, pp. 201–07.10.1016/S0921-5093(03)00065-0 ↗
14. A.D. Rollett and S.I. Wright: Texture and Anisotropy, Cambridge University Press, Cambridge, United Kingdom, 1998, pp. 179–239.
15. G. Garces, E. Onorbe, P. Perez, I.A. Denks, and P. Adeva: Mater. Sci. Eng., A, 2009, vol. 523, pp. 21–26.10.1016/j.msea.2009.06.026 ↗
16. G. Chadha, J.E. Allison, and J.W. Jones: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 286–97.10.1007/s11661-006-9027-z ↗
17. T.L. Anderson: Fracture Mechanics: Fundamentals and Applications, CRC Press, Inc., Boca Raton, FL, 1991, p. 709.
18. Annual Book of ASTM Standards, ASTM, Philadelphia, PA, 2000, vol. 03.01, pp. 431–61.
19. C.J. Boehlert, B.S. Majumdar, S. Krishnpurthy, and D.B. Miracle: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 309–23.10.1007/s11661-997-0134-2 ↗
20. N. Hort, H. Dieringa, Sanday T. Kumar, and K.U. Kainer: Magn. Technol.: Metall., Design Data, Applications, Springer, New York, NY, 2006, p. 317.
21. W. Betteridge: Nickel and Its Alloys, Halsted Press, New York, NY, 1984, p. 91.
22. S.A. Khan, Y. Miyashita, Y. Mutoh, and T. Koike: Mater. Sci. Eng., A, 2008, vol. 498, pp. 377–83.10.1016/j.msea.2008.08.015 ↗
23. R.L. Mordike and P. Lukac: Proc. 3rd Int. Magnesium Conf., The Institute of Metals, London, 1997, pp. 419–29.
24. K. Maruyama, M. Suzuki, and H. Sato: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 875–82.10.1007/s11661-002-0157-7 ↗
25. C.J. Boehlert: J. Mater. Sci., 2007, vol. 42, pp. 3675–84.10.1007/s10853-006-1352-5 ↗
26. M.S. Dargusch and G.L. Dunlop: Magnesium Alloys and Their Applications, Werkstoff-Informationsgesellschaft, Frankfurt, Germany, 1998, pp. 277–82.
27. M. Regev, E. Aghion, A. Rosen, and M. Bamberger: Mater. Sci. Eng., A, 1998, vol. 252, pp. 6–16.10.1016/S0921-5093(98)00668-6 ↗
28. M. Regev, E. Aghion, and A. Rosen: Mater. Sci. Eng., A, 1997, vol. 234, pp. 123–26.10.1016/S0921-5093(97)00215-3 ↗
29. G.E. Dieter: Mechanical Metallurgy, McGraw-Hill, New York, NY, 1986, p. 432.
30. H. Uchida and T. Shinya: J. Jpn. Inst. Light Met., 1995, vol. 45, p. 572.10.2464/jilm.45.572 ↗
31. S.S. Vagarali and T.G. Langdon: Acta Metall., 1982, vol. 30, pp. 1157–70.10.1016/0001-6160(82)90009-8 ↗