journal article·2005-03

Effect of orientation on the tensile and creep properties of coarse-grained INCONEL alloy MA754

Terry C. Totemeier, Thomas M. Lillo

Publisher page

Abstract

Elevated temperature tensile and creep-rupture tests were performed on INCONEL MA754 in longitudinal and transverse orientations at temperatures from 700°C to 1000°C. The transerve orientation was weaker and less ductile than the longitudinal orientation due to a higher grain boundary density perpendicular to the applied stress axis. This effect was especially pronounced in creep tests at 900°C and 1000°C. Threshold creep behavior was observed for the longitudinal orientation, with stress exponents ranging from 29 to 40. Stress exponents in the long transverse orientation ranged from 24 at 800°C to 5 at 1000°C, indicating a temperature-varying deformation mechanism. Creep ductility in the transverse orientation was extremely low, less than 1 pct for higher temperature, lower stress conditions. Failure in all transverse specimens was controlled by grain boundary separation. Even in the relatively weak transverse direction, the strength of MA754 compares favorably with other alloys being considered for advanced power plant applications.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and mechanical properties · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. J.S. Benjamin: Metall. Trans., 1970, vol. 1, pp. 2943–51.10.1007/BF03037835 ↗
2. W.L. Klopp: Aerospace Structural Metals Handbook, Purdue Research Foundation, West Lafayette, IN, 1992, alloy code 4106.
3. Special Metals Corporation: Technical Datasheet MA754, SMC-040, 2002.
4. B.A. Wilcox and A.H. Clauer: Acta Metall., 1972, vol. 20, pp. 743–57.10.1016/0001-6160(72)90103-4 ↗
5. J.D. Whittenberger: Metall. Trans. A, 1977, vol. 8A, pp. 1155–63.10.1007/BF02667401 ↗
6. J.D. Whittenberger: Mater. Sci. Eng., 1982, vol. 54, pp. 81–83.10.1016/0025-5416(82)90031-3 ↗
7. J.D. Whittenberger and P.T. Bizon: Int. J. Fatigue, 1981, vol. 3, pp. 173–80.10.1016/0142-1123(81)90017-7 ↗
8. T.E. Howson, J.E. Stulgia, and J.K. Tien: Metall. Trans. A, 1980, vol. 11A, pp. 1599–1607.10.1007/BF02654524 ↗
9. J.D. Whittenberger: Metall. Trans. A, 1977, vol. 8A, pp. 1863–70.10.1007/BF02646558 ↗
10. J.J. Stephens and W.D. Nix: Metall. Trans. A, 1985, vol. 16A, pp. 1307–24.10.1007/BF02670335 ↗
11. E. Arzt: in Mechanical Properties of Metallic Composites, S. Ochiai, ed., Marcel Dekker, New York, NY, 1994, pp. 205–23.
12. J.C. Gibeling and W.D. Nix: Mater. Sci. Eng., 1980, vol. 45, pp. 123–35.10.1016/0025-5416(80)90218-9 ↗
13. P. Shahanian and K. Sadananda: Metall. Trans. A, 1990, vol. 21A, pp. 177–87.10.1007/BF02656435 ↗
14. G.E. Dieter: Mechanical Metallurgy, 3rd ed., McGraw-Hill, New York, NY, 1986.
15. F.C. Monkman and N.J. Grant: Proc. ASTM, 1956, vol. 56, pp. 593–620.
16. F. Dobes and K. Milicka: Met. Sci., 1976, vol. 10, pp. 382–84.10.1080/03063453.1976.11683560 ↗
17. M. Malu and J.K. Tien: Scripta Metall., 1975, vol. 9, pp. 1117–20.10.1016/0036-9748(75)90291-4 ↗
18. B. DeMestral, G. Eggeler, and H-J. Klam: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 879–90.
19. J.D. Whittenberger: in Mechanical Properties of Metallic Composites, S. Ochiai, ed., Marcel Dekker, New York, NY, 1994, pp. 185–203.
20. J.K. Tien and R.P. Gamble: Metall. Trans., 1971, vol. 2, pp. 1663–67.10.1007/BF02913891 ↗
21. F. Povolo: J. Mater. Sci., 1985, vol. 20, pp. 2005–10.10.1007/BF01112283 ↗
22. Y.L. Chen, A.R. Jones, R.C. Pond, and U. Miller: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 3787–94.10.1007/s11661-002-0251-x ↗