Effects of Section Size, Surface Cooling Conditions, and Crucible Material on Microstructure and As-Cast Properties of Investment Cast Co-Cr Biomedical Alloy
Source abstract
Abstract
ASTM F75, a biomedical grade cobalt alloy, is commonly used for orthopedic implants manufactured using investment casting methods. The quality of the cast implants is paramount. Defects such as porosity, inclusions, or misruns are not tolerated and the mechanical properties have to conform to predetermined standards. Generally, castings are subjected to post-casting thermo-mechanical treatments to homogenize structure and improve mechanical properties. However, casting parameters have a significant effect on the as-cast properties of materials, and so if solidification and secondary phase precipitation can be controlled at this stage to limit defects and optimize properties, then the need for such expensive additional treatments may be reduced. The initial objective of this work was to determine the effect of section size and cooling rate on the microstructural characteristics and resultant mechanical properties of the investigated alloy. This was done by conducting a series of instrumented control experiments involving solidification of the alloy in typical investment shell molds, characterization of the as-cast micro/macrostructure, and a program of mechanical testing. In the process of conducting these experiments, unexpected microstructural features were observed that could not be found in the current literature. Through a series of tests conducted to ascertain the origin of this alternative microstructure, it was found that the crucible material used for melting the alloy was highly influential in defining the as-cast properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Orthopaedic implants and arthroplasty · Advanced materials and composites · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. J.V Giacchi, C.N Morando, O. Fornaro, and H.A Palacio: Mater. Charact., 2011, vol. 62, pp. 53–61.10.1016/j.matchar.2010.10.011 ↗
2. R. Rosenthal, B. Cardoso, I. Bott, R. Paranhos, and E. Carvalho: J Mater Sci, 2010, vol. 45, pp. 4021–28.10.1007/s10853-010-4480-x ↗
3. H Ghazvinizadeh, M Meratin, A Kermanpur, M Fathi, and H Minouei: IJE Transaction A: Basics, 2011, vol. 24, pp. 49–53.
4. M. Gomez, H. Mancha, A. Salinas, J. L. Rodriguez, J. Escobedo, M. Castro, and M. Mendez: J Biomed Mater Res, 1997, vol. 34, pp. 157–63.10.1002/(SICI)1097-4636(199702)34:2<157::AID-JBM3>3.0.CO;2-P ↗
5. M. Caudillo, M. Herrera-Trejo, M. R. Castro, E. Ramirez, C. R. Gonzalez, and J. I. Juarez: J Biomed Mater Res, 2002, vol. 59, pp. 378–85.10.1002/jbm.10001 ↗
6. L.E. Ramirez-Vidaurri, M. Castro-Roman, M. Herrera-Trejo, C.V. Garcia-Lopez, and E. Almanza-Casas: J Mater Process Technol, 2009, vol. 209, pp. 1681–87.10.1016/j.jmatprotec.2008.04.039 ↗
7. P.R. Beeley and R.F. Smart: Investment Casting, Maney Materials Science, London, 1995.
8. S. Sikkenga and C. Muskegon: ASM Handbook, ASM International, Materials Park, 2008, pp. 1114–18.
9. K. Asgar and F.A Peyton: J. Dent. Res., 1961, vol. 40, pp. 63–72.10.1177/00220345610400012501 ↗
10. CP Sullivan, MJ Donachi, and FR Morral: Cobalt-base Superalloys-1970, Centre d’information du cobalt, Brussels, 1970.
11. M. Herrera, A. Espinoza, J. Mendez, M. Castro, J. Lopez, and J. Rendon: J Mater Sci Mater Med, 2005, vol. 16, pp. 607–11.
12. R.M. Castro, M. Mendez, J. Lacaze, M. Herrera, and G. Lesoult: Scripta Mater., 2002, vol. 47, pp. 811–16.10.1016/S1359-6462(02)00305-6 ↗
13. J. Cawley, J. E. P. Metcalf, A. H. Jones, T. J. Band, and D. S. Skupien: Wear, 2003, vol. 255, pp. 999–1006.10.1016/S0043-1648(03)00046-2 ↗
14. K. Asgar and F.A. Peyton: J. Dent. Res., 1961, vol. 40, pp. 73–86.10.1177/00220345610400012601 ↗
15. H.S Dobbs and J.L.M. Robertson: J. Mater. Sci., 1983, vol. 18, pp. 391–401.10.1007/BF00560627 ↗
16. L. Z. Zhuang and E. W. Langer: J Mater Sci, 1989, vol. 24, pp. 381–88.10.1007/BF01107415 ↗
17. British Standards International: BS EN ISO 6892-1: Metallic materials—tensile testing, 2009.
18. W.S. Rasband: ImageJ, U.S National Institute of Health, Bethesda, Maryland, USA, 1997.
19. British Standards International: BS EN 23878: Hardmetals—vickers hardness test, 1993.
20. W Kurz and D Fisher: Fundamentals of Solidification, 3rd ed., Trans Tech Publications, Switzerland, 1992.
21. J.A. Dantzig and M. Rappaz: Solidification, Lausanne, EPFL Press, Italy, 2009.10.1201/9781439808030 ↗
22. J.R. Davis: in Aluminium and Aluminium Alloys, Materials Park, ASM International, 1993, p. 523.
23. J.R. Davis: Copper and Copper Alloys, ASM International, Materials Park, 2001, p. 360.
24. Foster C Nix and Frank E Jaumot: Physical Review, 1951, vol. 82, pp. 72–74.10.1103/PhysRev.82.72 ↗
25. Sudesna Roy and Teiichi Ando: Adv Eng Mater, 2010, vol. 12, pp. 912–19.10.1002/adem.201000136 ↗
26. Merton C Flemings: Solidification Processing, McGraw Hill, New York, 1974.
27. John Campbell: Castings, Butterworth-Heinemann Ltd., Oxford, 1991.
28. ASM International: Materials and Coatings for Medical Devices: Cardiovascular, ASM International, USA, 2009.
29. Jose C Escobedo Bocardo, Luz Carmen Pedroza Cervantes, Janusz Donizak, and Zygmunt Kolenda: Arch Metall, 2003, vol. 48, pp. 53–73.
30. David J. Browne and Denis O’Mahoney: Metall Mater Trans A, 2001, vol. 32, pp. 3055–63.10.1007/s11661-001-0180-0 ↗
31. B.C. Punmia, Ashok Jain, and Arun Jain: Mechanics of Materials, Laxmi Publications, New Delhi, 2011.