journal article·2015-04

Effect of Grain Refinement on the Mechanical Properties of a Nickel- and Manganese-Free High Nitrogen Austenitic Stainless Steel

Alireza Akbari, Roghayeh Mohammadzadeh

Publisher page

Abstract

Grain coarsening due to the high temperature exposure deteriorates mechanical properties of the high nitrogen austenitic stainless steels (HNASSs) produced by solution nitriding. To improve mechanical properties, the grains of nickel and manganese-free Fe-23Cr-2.4Mo-1.2N HNASS plates fabricated by pressurized solution nitriding were refined using a two-stage heat treatment process. Structural and mechanical properties were investigated using X-ray diffraction, optical microscopy, scanning and transmission electron microscopy, hardness and tensile testing and compared with that of the conventional AISI 316L steel. The results show that the as-produced HNASS exhibits uniform deformation up to failure without necking and brittle inter-granular fracture. By grain refinement, the yield and tensile strengths as well as the elongation to failure are increased by 17.8, 21.2, and 108.3 pct, respectively, as compared to the as-produced HNASS. However, despite more than a double increase in tensile toughness and elongation to failure, the brittle inter-granular fracture is not suppressed. The HNASSs plastically deform through formation of straight slip bands. TEM observations indicate development of planar arrays of dislocations in tensile-deformed HNASSs. The enhancement in tensile strength and toughness by grain refinement is discussed on the basis of straight slip bands formation, number of dislocations in pile-ups, and incompatibility strain developed between adjacent grains.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. P.J. Uggowitzer, R. Magdowski and M.O. Speidel: ISIJ Int., 1996, vol. 36, pp. 901-8.10.2355/isijinternational.36.901 ↗
2. K.L. Chao, H.Y. Liao, J.J. Shyue and S.S. Lian: Metall. Mater. Trans. B, 2014, vol. 45, pp. 381-91.10.1007/s11663-013-9891-z ↗
3. M. Sumita, T. Hanawa and S.H. Teoh: Mater. Sci. Eng. C, 2004, vol. 24, pp. 753-60.10.1016/j.msec.2004.08.030 ↗
4. H. Li, Z. Jiang, Z. Zhang, B. Xu and F. Liu: J. Iron. Steel Res. Int., 2007, vol. 14, pp. 330–34.10.1016/S1006-706X(08)60105-3 ↗
5. S. Rao G, V. Singh and L.K. Singhal: Mater. Sci. Eng. A, 2012, vol. 538, pp. 224-30.10.1016/j.msea.2012.01.034 ↗
6. ASTM F 2229-02 Standard Specification for Wrought, Nitrogen Strengthened 23 Manganese-21Chromium-1Molybdenum Low-nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108).
7. ASTM F 2581-07 Standard Specification for Wrought Nitrogen Strengthened 11 Manganese-17 Chromium-3 Molybdenum Low-Nickels Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225).
8. J. Menzel, W. Kirschner and G. Stein: ISIJ Int., 1996, vol. 36, pp. 893-900.10.2355/isijinternational.36.893 ↗
9. G. Balachandran, M.L. Bhatia, N.B. Ballal, and P. Krishna Rao: ISIJ Int., 2001, vol. 41, pp. 1018-27.10.2355/isijinternational.41.1018 ↗
10. V.G. Gavriljuk, H. Berns, High Nitrogen Steels-Structure, Properties, Application, Springer, Berlin, 1999.10.1007/978-3-662-03760-7 ↗
11. A. Yamamoto, Y. Kohyama and T. Hanawa: J. Biomed. Mater. Res., 2002, vol. 59, pp. 176-83.10.1002/jbm.1231 ↗
12. A. Yamamoto, R. Honma and M. Sumita: J. Biomed. Mater. Res., 1998, vol. 39, pp. 331-40.10.1002/(SICI)1097-4636(199802)39:2<331::AID-JBM22>3.0.CO;2-E ↗
13. D. Kuroda, S. Hiromoto, T. Hanawa and Y. Katada: Mater. Trans., 2002, vol. 43, pp. 3100-04.10.2320/matertrans.43.3100 ↗
14. T. Nakanishi, T. Tsuchiyama, H. Mitsuyasu, Y. Iwamoto and S. Takaki: Mater. Sci. Eng. A, 2007, vol. 460-461, pp. 186-94.10.1016/j.msea.2007.01.024 ↗
15. J.F.D. Santos, C.M. Garzón and A.P. Tschiptschin: Mater. Sci. Eng. A, 2004, vol. 382, pp. 378-8610.1016/j.msea.2004.05.003 ↗
16. J.H. Sung, J.H. Kong, D.K. Yoo, H.Y. On, D.J. Lee and H.W. Lee: Mater. Sci. Eng. A, 2008, vol. 489, pp. 38-43.10.1016/j.msea.2007.11.078 ↗
17. D. Kuroda, T. Hanawa, T. Hibaru, S. Kuroda, M. Kobayashi and T. Kobayashi: Mater. Trans., 2003, vol. 44, pp. 414-20.10.2320/matertrans.44.414 ↗
18. R. Mohammadzadeh and A. Akbari: Mater. Sci. Eng. A, 2014, vol. 592, pp. 153-63.10.1016/j.msea.2013.10.103 ↗
19. R. Mohammadzadeh and A. Akbari: Mater. Charact., 2014, vol. 93, pp. 119-128.10.1016/j.matchar.2014.04.001 ↗
20. B.D. Cullity, Elements of X-ray Diffraction, Second ed., London, Addison-Wesley, 1977.
21. P.J. Withers and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 2001, vol. 17, pp. 355-365.10.1179/026708301101509980 ↗
22. T. Tsuchiyama, Y. Fujii, Y. Terazawa, K. Nakashima, T. Ando and S. Takaki: ISIJ Int., 2008, vol. 48, pp. 861-867.10.2355/isijinternational.48.861 ↗
23. R.L. Tobler and D. Meyn: Metall. Trans. A, 1988, vol. 19A, pp. 1626-31.10.1007/BF02674040 ↗
24. S.C. Liu, T. Hashida, H. Takashi, H. Kuwano and Y. Hamaguchi: Metall. Mater. Trans. A, 1998, vol. 29, pp. 791-8.10.1007/s11661-998-0270-3 ↗
25. P. Müllner, C. Solenthaler, P.J. Uggowitzer and M.O. Speidel: Acta Metall. Mater., 1994, vol. 42, pp. 2211-17.10.1016/0956-7151(94)90300-X ↗
26. P. Müllner: Mater. Sci. Eng. A, 1997, vol. 234-236, pp. 94-7.10.1016/S0921-5093(97)00196-2 ↗
27. Y. Tomota, J. Nakano, Y. Xia and K. Inoue: Acta Mater., 1998, vol. 46, pp. 3099-108.10.1016/S1359-6454(98)00005-6 ↗
28. W. Wang, S. Wang, K. Yang and Y. Shan: Mater. Des., 2009, vol. 30, pp. 1822-24.10.1016/j.matdes.2008.08.009 ↗
29. Y. Tomota, Y. Xia and K. Inoue : Acta Mater., 1998, vol. 46, pp. 1577-87.10.1016/S1359-6454(97)00350-9 ↗
30. Y. Tomota and S. Endo: ISIJ Int., 1990, vol. 30, pp. 656-62.10.2355/isijinternational.30.656 ↗
31. M. Tanaka, T. Onomoto, T. Tsuchiyama and K. Higashida: ISIJ Int., 2012, vol. 52, pp. 915-21.10.2355/isijinternational.52.915 ↗
32. J. Ishizaka, K. Orita and K. Terao: Tetsu-to-Hagané, 1992, vol. 78, pp. 1846-53.10.2355/tetsutohagane1955.78.12_1846 ↗
33. V. Gerold and H.P. Karnthaler: Acta Metall., 1989, vol. 37, pp. 2177-83.10.1016/0001-6160(89)90143-0 ↗
34. M. Ojima, Y. Adachi, Y. Tomota, K. Ikeda, T. Kamiyama and Y. Katada: Mater. Sci. Eng. A, 2009, vol. 527, pp. 16-24.10.1016/j.msea.2009.07.066 ↗
35. P. Müllner, C. Solenthaler, P.J. Uggowitzer and M.O. Speidel: Mater. Sci. Eng. A, 1993, vol. 164, pp. 164-9.10.1016/0921-5093(93)90655-X ↗
36. S. Kubota, Y. Xia and Y. Tomota: ISIJ Int., 1998, vol. 38, pp. 474-81.10.2355/isijinternational.38.474 ↗
37. P.C. Pistorius and M.D. Toit: The Twelfth International Ferroalloys Congress 2010, Finland, Helsinki, pp. 911–918.
38. K.H. Lo, C.H. Shek and J.K.L. Lai: Mater. Sci. Eng. R, 2009, vol. 65, pp. 39-104.10.1016/j.mser.2009.03.001 ↗
39. K. Wolf, H.J. Gudladt, H.A. Calderon and G. Kostorz: Acta Metall. Mater., 1994, vol. 42, pp. 3759-65.10.1016/0956-7151(94)90441-3 ↗
40. M.G. Mendiratta, S.M.L. Sastry and J.V. Smith: J. Mater. Sci., 1976, vol. 11, pp. 1835-42.10.1007/BF00708261 ↗
41. K.A. Nibur and D.F. Bahr: Scripta Mater., 2003, vol. 49, pp. 1055-60.10.1016/j.scriptamat.2003.08.021 ↗
42. I. Karaman, H. Sehitoglu, H.J. Maier and Y.I. Chumlyakov: Acta Mater., 2001, vol. 49, pp. 3919-33.10.1016/S1359-6454(01)00296-8 ↗
43. I.A. Yakubtsov, A. Ariapour and D.D. Perovic: Acta Mater., 1999, vol. 47, pp. 1271-9.10.1016/S1359-6454(98)00419-4 ↗