journal article·2013-08

Comparative Study of Mechanical Alloying Induced Nanocrystallization and Amorphization in Ni-Nb and Ni-Zr Systems

M. H. Enayati, E. Dastanpoor

Publisher page

Abstract

The nanocrystallization and amorphization processes in Ni60Nb40 and Ni60Zr40 binary alloys during mechanical alloying (MA) were studied in detail. The mechanical alloying behavior of these alloy systems was compared with respect to the rate of refinement of grain size, ultimate grain size, and rate of amorphization reaction. For both compositions, MA leads to the refinement of grain size and enhancement of internal strain, followed by the amorphization reaction. The higher melting temperature metal Nb exhibits smaller grain size and greater internal strain, although the Ni and Nb grain size approach a similar value of ~15 nm after 20 hours of milling time. The refinement of grain size and enhancement of internal strain was observed to occur with a slower rate during MA of Ni60Zr40 alloy compared to Ni60Nb40 alloy. In all cases, an ultrafine layered structure with a typical thickness of 30 nm, containing nanoscale size grains with a typical size of 15 nm and a high density of dislocations, develops prior to the amorphization reaction. This observation suggests that numerous high-speed diffusion paths such as grain boundaries and dislocations are necessary to allow a high diffusion rate at low temperature and therefore permits the amorphization reaction to take place kinetically. The Ni-Zr system is a better glass former in MA than Ni-Nb system; i.e., the start time of amorphization reaction for Ni60Zr40 was about half that for Ni60Nb40. These results were discussed in terms of physical and chemical characteristics of the constituent elements of the alloy systems. Furthermore, the thermodynamically stable phase in each system was predicted using a semi-empirical Miedema model, and the results were compared with the structure formed in MA of Ni-Zr and Ni-Nb powder mixture.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · High Entropy Alloys Studies · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. C.Y. Chung, M. Zhu, and C.H. Man: Intermetallics, 2002, vol. 10, pp. 865–71.10.1016/S0966-9795(02)00088-2 ↗
2. M. Zhu, M. Qi, A.Q. He, H.X. Sui, and W.G. Liu: Acta Metall. Mater., 1994, vol. 42, pp. 1893–99.10.1016/0956-7151(94)90014-0 ↗
3. J. Eckert, J.C. Holzer, C.E. Kril, and W.L. Johnson: J. Mater. Res., 1992, vol. 7, pp. 1751–61.10.1557/JMR.1992.1751 ↗
4. A. Benghalem and D.G. Morris: Acta Metall. Mater., 1994, vol. 42, pp. 4071–81.10.1016/0956-7151(94)90184-8 ↗
5. H.J. Fecht, E. Hellstern, Z. Fu, and W.L. Johnson: Adv. Powder Metall., 1989, vol. 1, pp. 111–22.
6. H.J. Fecht, E. Hellstern, Z. Fu, and W.L. Johnson: Metall. Trans. A, 1990, vol. 21, pp. 2333–37.10.1007/BF02646980 ↗
7. F.A. Mohamed and Y. Xun: Mater. Sci. Eng. A, 2003, vol. 354, pp. 133–39.10.1016/S0921-5093(02)00936-X ↗
8. F.A. Mohamed: Acta Mater., 2003, vol. 51, pp. 4107–19.10.1016/S1359-6454(03)00230-1 ↗
9. F.A. Mohamed and Y. Xun: Mater. Sci. Eng. A, 2003, vol. 358, pp. 178–85.10.1016/S0921-5093(03)00294-6 ↗
10. C.C. Koch: Nanostruct. Mater., 1993, vol. 2, pp. 109–29.10.1016/0965-9773(93)90016-5 ↗
11. C. Suryanarayana: Prog. Mater. Sci., 2001, vol. 46, pp. 1–184.10.1016/S0079-6425(99)00010-9 ↗
12. R.B. Schwarz, R.R. Petrich, and C.K. Saw: J. Non-Cryst. Solids., 1985, vol. 76, pp. 281–302.10.1016/0022-3093(85)90005-5 ↗
13. W.L. Johnson: Prog. Mater. Sci., 1986, vol. 30, pp. 81–134.10.1016/0079-6425(86)90005-8 ↗
14. W.L. Johnson: Mater. Sci. Eng., 1988, vol. 97, pp. 1–13.10.1016/0025-5416(88)90003-1 ↗
15. I. Manna, P. Nandi, B. Bandyopadhyay, K. Ghoshray, and A. Ghoshray: Acta Mater., 2004, vol. 52, pp. 4133–42.10.1016/j.actamat.2004.05.026 ↗
16. C.C. Koch, O.B. Cavin, C.G. McKamey, and J.O. Scarbrough: Appl. Phys. Lett., 1983, vol. 43, pp. 1017–19.10.1063/1.94213 ↗
17. F. Petzoldt, B. Scholz, and H.D. Kunze: Mater. Lett., 1987, vol. 5, pp. 280–84.10.1016/0167-577X(87)90111-X ↗
18. E. Hellstern and L. Schultz: Appl. Phys. Lett., 1986, vol. 48, pp. 124–26.10.1063/1.96971 ↗
19. G.K. Williamson and W.H. Hall: Acta Metall., 1953, vol. 1, pp. 22–31.10.1016/0001-6160(53)90006-6 ↗
20. S. Bera, S. Mazumdar, M. Ramgopal, S. Bhattacharyya, and I. Manna: J. Mater. Sci., 2007, vol. 42, pp. 3645–50.10.1007/s10853-006-1377-9 ↗
21. A.R. Miedema, F.R. de Boer, and R. Boom: J. Phys. B, 1981, vol. 103, pp. 67–81.
22. L.M. Di, H. Bakker, P. Barczy, and Z. Gacsi: Acta Metall. Mater., 1993, vol. 41, pp. 2923–32.10.1016/0956-7151(93)90106-3 ↗
23. H. Bakker: J. Less-Common Met., 1985, vol. 105, pp. 129–38.10.1016/0022-5088(85)90131-6 ↗
24. P.K. Ray, M. Akinc, and M.J. Kramer: J. Alloys Compd., 2010, vol. 489, pp. 357–61.10.1016/j.jallcom.2009.07.062 ↗
25. R.F. Zhang and B.X. Liu: Appl. Phys. Lett., 2002, vol. 81, pp. 1219–21.10.1063/1.1499510 ↗
26. A.R. Miedema, P.F. de Chatel, and F.R. de Boer: Physica, 1980, vol. 100B, pp. 1–28.
27. N.K. Mukhopadhyay, D. Mukherjee, S. Dutta, R. Manna, D.H. Kim, and I. Manna: J. Alloy. Compd., 2008, vol. 457, pp. 177–84.10.1016/j.jallcom.2007.03.043 ↗
28. P.I. Loeff, A.W. Weeber, and A.R. Miedema: J. Less-Common Met., 1988, vol. 140, pp. 299–305.10.1016/0022-5088(88)90390-6 ↗
29. T. Mousavi, F. Karimzadeh, and M.H. Abbasi: Mater. Lett., 2009, vol. 63, pp. 786–88.10.1016/j.matlet.2009.01.017 ↗
30. G.J. Vander-Kolk, A.R. Miedema, and A.K. Niessen: J. Less-Common Met., 1988, vol. 145, pp. 1–17.10.1016/0022-5088(88)90257-3 ↗
31. N. Gao and W.S. Lai: J. Phys. Condens. Matter, 2007, vol. 19, pp. 1–12.
32. E. Hellstern, H.J. Fechet, Z. Fu, and W.L. Johnson: J. Appl. Phys., 1989, vol. 65, pp. 305–10.10.1063/1.342541 ↗
33. T. Nasu, K. Nagaoka, S. Takahashi, E. Suganuma, T. Sekiuchi, T. Fukunago, and K. Suzuki: Mater. Trans. JIM, 1989, vol. 30, pp. 620–23.10.2320/matertrans1989.30.620 ↗
34. R. Bormann and R. Busch: New Materials by Mechanical Alloying Techniques, DGM Informationsgesellschaft, Oberursel, Germany, 1988, pp. 73–78.
35. S.K. Pabi, D. Das, T.K. Mahapatra, and I. Manna: Acta Mater., 1998, vol. 46, pp. 3501–10.10.1016/S1359-6454(98)00035-4 ↗
36. O. Haruyama and N. Asahi: J. Alloys Compd., 1993, vol. 194, pp. 361–71.10.1016/0925-8388(93)90021-E ↗
37. J. Eckert, L. Schultz, E. Hellstern, and K. Urban: J. Appl. Phys., 1988, vol. 64, pp. 3224–28.10.1063/1.341540 ↗
38. F. Petzoldt, B. Scholz, and H.D. Kunze: Mater. Sci. Eng., 1988, vol. 97, pp. 25–29.10.1016/0025-5416(88)90005-5 ↗
39. R. Bruning, Z. Altounnian, J.O. Strom-Olsen, and L. Schultz: Mater. Sci. Eng., 1988, vol. 97, pp. 317–20.10.1016/0025-5416(88)90064-X ↗
40. C. Suryanarayana, T. Klassen, and E. Ivanov: J. Mater. Sci., 2011, vol. 46, pp. 6301–15.10.1007/s10853-011-5287-0 ↗