journal article·2007-11

Impact of Cu/Mg Ratio on Thermal Stability of Hot Extrusion of Al-4.6 Pct Cu-Mg-Ag Alloys

Chih-Horng Chang, Sheng-Long Lee, Tiz-Yu Hsu, Jing-Chie Lin

Publisher page

Abstract

This work explores how the Cu/Mg ratio affects the thermal stability of the extrusion of Al-4.6 pct Cu-Mg-Ag alloys at aerodynamic heating temperatures of up to 155 °C for 1000 hours. The Cu/Mg ratio was modified by adding various amounts of elemental Mg. The alloy microstructures, which determine thermal stability, were analyzed with an optical microscope, an electrical conductivity meter, a differential scanning calorimeter (DSC), and a transmission electron microscope. Experimental results indicate that reducing the Cu/Mg ratio of the alloy by the further addition of Mg causes Ω to become the primary strengthening phase after aging treatment, increasing the hardness and the thermal stability, although the θ′ phase is suppressed. The S phase does not affect the thermal stability of the alloy, because it is present in only a low quantity. Results of this study also demonstrate that the hot-extruded low Cu/Mg alloy satisfies the requirement of the material thermal stability of commercial supersonic aerial applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. J.E. Hatch: Aluminum Properties and Physical Metallurgy, ASM INTERNATIONAL, Metals Park, OH, 1984, pp. 321–65
2. I.J. Polmear, G. Pons, Y. Barbaux, H. Octor, C. Sanchez, A.J. Morton, W.E. Borbidge, S. Rogers: Mater. Sci. Technol., 1999, vol. 15, pp. 861–6810.1179/026708399101506599 ↗
3. S.M. Kazanjian, N. Wang, E.A. Starke Jr.: Mater. Sci. Eng. A, 1997, vols. A234–A236, pp. 571–7410.1016/S0921-5093(97)00240-2 ↗
4. V.A. Phillips: Acta Mater., 1975, vol. 23, pp. 751–6710.1016/0001-6160(75)90058-9 ↗
5. I.J. Polmear: Trans. TMS-AIME, 1964, vol. 230, pp. 1331–39
6. J.T. Vietz, I.J. Polmear: J. Inst. Met., 1966, vol. 94, pp. 410–17
7. R.J. Chester, I.J. Polmear: Metallurgy of Light Alloys, Spring Residential Conf., Institute of Metallurgists, London, 1983, vol. 3 (20), pp. 75–81
8. K.M. Knowles, W.M. Stobbs: Acta Cryst. B, 1988, B44, pp. 207–2710.1107/S0108768187012308 ↗
9. B.C. Muddle, I.J. Polmear: Acta Mater., 1989, vol. 37, pp. 777–8910.1016/0001-6160(89)90005-9 ↗
10. K. Hono, N. Sano, S.S. Babu, R. Okano, T. Sakurai: Acta Mater., 1993, vol. 41, pp. 829–3810.1016/0956-7151(93)90016-L ↗
11. K. Hono, T. Sakurai, I.J. Polmear: Scripta Metall., 1994, vol. 30, pp. 695–70010.1016/0956-716X(94)90184-8 ↗
12. S.P. Ringer, K. Hono, I.J. Polmear, T. Sakurai: Acta Mater., 1996, vol. 44, pp. 1883–9810.1016/1359-6454(95)00314-2 ↗
13. I.J. Polmear, M.J. Couper: Metall. Trans. A, 1988, vol. 19A, pp. 1027–3510.1007/BF02628387 ↗
14. S.P. Ringer, W. Yeung, B.C. Muddle, I.J. Polmear: Acta Mater., 1994, vol. 42, pp. 1715–2510.1016/0956-7151(94)90381-6 ↗
15. L. Del Castillo, E.J. Lavernia: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 287–98
16. R.J. Chester, I.J. Polmear: Micron, 1980, vol. 11, pp. 311–12
17. O. Beffort, C. Solenthaler, P.J. Uggowitzer, M.O. Speidel: Mater. Sci. Eng. A, 1995, vol. A191, pp. 121–3410.1016/0921-5093(94)09642-2 ↗
18. B.M. Gable, G.J. Shiflet, E.A. Starke Jr.: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 1091–110510.1007/s11661-006-1079-6 ↗
19. S.P. Ringer, W. Yeung, B.C. Muddle, I.J. Polmear: Acta Mater., 1994, vol. 42, pp. 1715–2510.1016/0956-7151(94)90381-6 ↗
20. C.R. Hutchison, X. Fan, S.J. Pennycook, G.J. Shiflet: Acta Mater., 2001, vol. 49, pp. 2827–4110.1016/S1359-6454(01)00155-0 ↗
21. S.P. Ringer, B.C. Muddle, I.J. Polmear: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1659–7110.1007/BF02670753 ↗
22. S. Muraishi, S. Kumai, A. Sato: Mater. Trans., 2004, vol. 45, pp. 2974–8010.2320/matertrans.45.2974 ↗
23. S. Kalpakjian: Manufacturing Engineering Technology, 3rd ed., Addison-Wesley, Reading, MA, 1995, pp. 417–28
24. J.R. Davis: ASM Specialty Handbook Aluminum and Aluminum Alloys, ASM INTERNATIONAL, Metals Park, OH, 1994, pp. 89–120
25. J.R. Davis: ASM Specialty Handbook Aluminum and Aluminum Alloys, ASM INTERNATIONAL, Metals Park, OH, 1993, pp. 706–08
26. K. Osamura, N. Otsuka, Y. Murakami: Phil. Mag. B, 1982, vol. B45, pp. 583–9910.1080/01418638208227612 ↗
27. G. Riontino, S. Abis: Phil. Mag. B, 1991, vol. B64, pp. 447–6110.1080/13642819108215268 ↗
28. R.E. Reed-Hill, R. Abbaschian: Physical Metallurgy Principles, 3rd ed., PWS Publishing, Boston, MA, 1994, p. 521
29. M.A. Kenawy, M.R. Nagy, M.S. Sakr, M.T. Mostafa: Phys Status Solidi A, 1986, vol. 97, pp. k73–k7810.1002/pssa.2210970149 ↗
30. A.J. Hillel: Phil. Mag., 1983, vol. 48, pp. 237–4310.1080/13642818308228286 ↗
31. S. Hirosawa, T. Sato, J. Yokota, A. Kamio: Mater. Trans. JIM, 1998, vol. 39, pp. 139–4610.2320/matertrans1989.39.139 ↗
32. J.E. Hatch: Aluminum: Properties and Physical Metallurgy, ASM INTERNATIONAL, Metals Park, OH, 1984, p. 177
33. Q. Li, R.N. Shenoy: Mater. Sci., 1997, vol. 32, pp. 3401–0610.1023/A:1018664515422 ↗
34. S. Abis, P. Mengucci, G. Riontino: Phil. Mag. B, 1993, vol. B67, pp. 465–8410.1080/13642819308207686 ↗
35. C.H. Chang, S.L. Lee, J.C. Lin, R.R. Jeng: Mater. Trans., 2005, vol. 46, pp. 236–4010.2320/matertrans.46.236 ↗
36. V. Radmilovic, G. Thomas, G.J. Shiflet, E.A. Starke Jr.: Scripta Metall., 1989, vol. 23, pp. 1141–4610.1016/0036-9748(89)90315-3 ↗
37. R.E. Reed-Hill, R. Abbaschian: Physical Metallurgy Principles, 3rd ed., PWS Publishing Co., Boston, MA, 1991, pp. 272–88
38. M. Takeda, Y. Maeda, A. Yoshida, K. Yabuta, S. Konuma, T. Endo: Scripta Mater., 1999, vol. 41, pp. 643–4910.1016/S1359-6462(99)00137-2 ↗
39. C.H. Chang, S.L. Lee, J.C. Lin, M.S. Yeh, R.R. Jeng: Mater. Chem. Phys., 2005, vol. 91 (2–3), pp. 454–6210.1016/j.matchemphys.2004.12.009 ↗