journal article·2001-11

Effects of temperature on the fatigue crack growth behavior of cast gamma-based titanium aluminides

C. Mercer, S. M. Allameh, J. Lou, W. O. Soboyejo

Publisher page

Abstract

This article reports the results of an experimental study of the effects of temperature (25 °C, 450 °C, and 700 °C) on the fatigue crack growth behavior of three near-commercial cast gamma titanium aluminide alloys (Ti-48Al-2Cr-2Nb, Ti-47Al-2Mn-2Nb+0.8 pct TiB2, and Ti-45Al-2Mn-2Nb+0.8 pct TiB2). The trends in the fatigue crack growth rate data are explained by considering the combined effects of crack-tip deformation mechanisms and oxide-induced crack closure. Faster fatigue crack growth rates at 450 °C are attributed to the high incidence of irreversible deformation-induced twinning, while slower crack growth rates at 700 °C are due to increased deformation by slip and the effects of oxide-induced crack closure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced ceramic materials synthesis · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. W.O. Soboyejo, J.E. Deffeyes, and P.B. Aswath: Mater. Sci. Eng., 1991, vol. A138, pp. 95–101.10.1016/0921-5093(91)90679-H ↗
2. P.B. Aswath, W.O. Soboyejo, and S. Suresh: FATIGUE ’90, Proc. Int. Conf. on Fatigue, H. Kitagawa and T. Tanaka, eds., EMAS, Warley, United Kingdom, 1990, pp. 1941–46.
3. A.L. McKelvey, K.T. Venkateswara Rao, and R.O. Ritchie: Scripta Mater., 1997, vol. 37, pp. 1797–1803.10.1016/S1359-6462(97)00338-2 ↗
4. B.D. Worth, J.M. Larsen, S.J. Balsone, and J.W. Jones: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 825–35.
5. S.J. Balsone, B.D. Worth, J.M. Larsen, and J.W. Jones: Scripta Metall. Mater., 1995, vol. 32, pp. 1653–58.10.1016/0956-716X(95)00250-Y ↗
6. S. Suresh and J.R. Brockenbrough: Acta Metall., 1988, vol. 36, pp. 1444–70.10.1016/0001-6160(88)90213-1 ↗
7. C. Mercer and W.O. Soboyejo: Acta Mater., 1997, vol. 45, pp. 961–71.10.1016/S1359-6454(96)00239-X ↗
8. A.L. McKelvey, K.T. Venkateswara Rao, and R.O. Ritchie: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1413–23.10.1007/s11661-000-0259-z ↗
9. K.S. Chan: Metall. Trans. A, 1991, vol. 22A, pp. 2021–29.10.1007/BF02669869 ↗
10. L.R.F. Rose: Int. J. Fract., 1986, vol. 31, pp. 233–42.10.1007/BF00018929 ↗
11. R.G. Hoagland and J.D. Embury: J. Am. Ceram. Soc., 1980, vol. 63, pp. 404–10.10.1111/j.1151-2916.1980.tb10201.x ↗
12. C. Mercer and W.O. Soboyejo: Acta Mater., 1997, vol. 45, pp. 4385–96.10.1016/S1359-6454(97)00060-8 ↗
13. J.M. Larsen, B.D. Worth, S.J. Balsone, A.H. Rosenberger, and J.W. Jones: FATIGUE ’96, Elsevier Science Ltd., Oxford, United Kingdom, 1996, pp. 1719–30.
14. Z. Jin and T.R. Bieler: Phil. Mag. A, 1995, vol. 71, pp. 925–47.10.1080/01418619508236229 ↗
15. C. Laird and G.C. Smith: Phil Mag., 1962, 8, pp. 847–57.10.1080/14786436208212674 ↗
16. S. Suresh and R.O. Ritchie: in Fatigue Crack Growth Threshold Concepts, D.L. Davidson and S. Suresh, eds., AIME, Warrendale, PA, 1984, pp. 227–61.