Constitutive Modeling of Hot Deformation Behavior of the AA6063 Alloy with Different Precipitates
Source abstract
Abstract
The current study proposes a simple constitutive model that integrates the kinetics of precipitation during static aging and the kinetics of precipitate dissolution during preheating to deformation temperature to predict the hot flow behavior of AA6063 alloy. The model relates the flow behavior of the age-hardenable alloy to the alloy chemistry, thermal history as well as deformation temperature, strain, and strain rate by means of a physically based model. Different aging conditions, including supersaturated solid solution and overaging conditions with different deformation parameters, were assessed. Each part of the model was in good agreement with those of experimental and other model results published in the literature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. A. Heinz, A. Haszler, C. Keidel, S. Moldenhauer, R. Benedictus, and W.S. Miller: Mater. Sci. Eng. A, 2000, vol. 280, pp. 102-07.10.1016/S0921-5093(99)00674-7 ↗
2. H-K. Kim, J-H. Cho, H-W. Kim, and J-C. Lee: Korean J. Met. Mater., 2012, vol. 50, pp. 503-09.10.3365/KJMM.2012.50.1.034 ↗
3. S.W. Han: Metal. Mater. Int., 2013, vol. 19, pp. 1-4.10.1007/s12540-013-1001-x ↗
4. K. Dehghani and A. Nekahi: Metal. Mater. Int., 2013, vol. 18, pp. 757-67.10.1007/s12540-012-5004-9 ↗
5. I. Dinaharan and N. Murugan: Metal. Mater. Int., 2013, vol. 18, pp. 135-42.10.1007/s12540-012-0016-z ↗
6. H. Ahmeda, M.A. Wellsa, D.M. Maijera, B.J. Howesa, and M.R. van der Winden: Mater. Sci. Eng. A, 2005, vol. 390, pp. 278-90.10.1016/j.msea.2004.08.045 ↗
7. L.M. Cheng, W.J. Poole, J.D. Embury, and D.J. Lloyd: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2473-81.10.1007/s11661-003-0007-2 ↗
8. B. Zhang and T.N. Baker: J. Mater. Process. Technol., 2004, vol. 153-154, pp. 881-85.10.1016/j.jmatprotec.2004.04.091 ↗
9. C. Poletti, M.R. Hortala, M. Hauser, and C. Sommitsch: Mater. Sci. Eng. A, 2011, vol. 528, pp. 2423-30.10.1016/j.msea.2010.11.048 ↗
10. N. Anjabin and A. Karimi Taheri: Mater. Des., 2010, vol. 31, pp. 433-37.10.1016/j.matdes.2009.05.045 ↗
11. S.Y. Kang: Korean J. Met. Mater., 2012, vol. 50, pp. 883-90.10.3365/KJMM.2012.50.1.052 ↗
12. J.H. Kim, J.S. Jo, W.J. Sim, and H.J. Im: Korean J. Met. Mater., 2012, vol. 50, pp. 669-75.10.3365/KJMM.2012.50.1.034 ↗
13. B.H. Jung, J.P. Kong, and C.Y. Kang: Korean J. Met. Mater., 2012, vol. 50, pp. 224-32.10.3365/KJMM.2012.50.3.224 ↗
14. S. Kim and C. Lee: Met. Mater. Int., 2013, vol. 18, pp. 857-62.10.1007/s12540-012-5017-4 ↗
15. S. Spigarelli, E. Evangelista, and H.J. McQueen: Scripta Mater., 2003, vol. 49, pp. 179-83.10.1016/S1359-6462(03)00206-9 ↗
16. M. Schikorra, L. Donati, L. Tomesani, and A.E. Tekkaya: J. Mater. Process. Technol., 2008, vol. 201, pp. 156-62.10.1016/j.jmatprotec.2007.11.160 ↗
17. F. Parvizian, T. Kayser, C. Hortig, and B. Svendsen: J. Mater. Process. Technol., 2009, vol. 209, pp. 876-883.10.1016/j.jmatprotec.2008.02.076 ↗
18. J. Van de Langkruis, W.H. Kool, and S. van der Zwaag: Mater. Sci. Eng. A, 1999, vol. 266, pp. 135-45.10.1016/S0921-5093(99)00046-5 ↗
19. J. van de Langkruis, W.H. Kool, C.M. Sellars, M.R. van der Winden, and S. van der Zwaag: Mater. Sci. Eng. A, 2001, vol. 299, pp. 105–115.10.1016/S0921-5093(00)01421-0 ↗
20. J. Sheikh-Ahmad and J. Twomey: J. Mater. Process. Technol., 2007, vol. 186, pp. 339-45.10.1016/j.jmatprotec.2006.11.228 ↗
21. A. Jenab, A. Karimi Taheri, and K. Jenab: J. Mater. Eng. Perform., 2012. DOI: 10.1007/s11665-012-0332-y.10.1007/s11665-012-0332-y ↗
22. O.R. Myhr and Q. Grong: Acta Mater., 2000, vol. 48,pp. 1605-615.10.1016/S1359-6454(99)00435-8 ↗
23. H.R. Shercliff and M.F. Ashby: Acta Metall. Mater., 1990, vol. 38, pp. 1789-802.10.1016/0956-7151(90)90291-N ↗
24. F.Vermolen, K. Vuik, and S. van der Zwaag: Mater. Sci. Eng. A, 1998, vol. 254, pp. 13-32.10.1016/S0921-5093(98)00763-1 ↗
25. J. van de Langkruis, W.H. Kool, and S. van der Zwaag: J. Mater. Eng. Perform., 2006, vol. 15,pp. 632-39.10.1361/105994906X150876 ↗
26. J. van de Langkruis, J. Lof, W.H. Kool, S. van der Zwaag, and J. Huetink: Comput. Mater. Sci., 2000, vol. 18, pp. 381-92.10.1016/S0927-0256(00)00122-1 ↗
27. S.P. Chen, M.S. Vossenberg, F.J. Vermolen, J. van de Langkruis, and S. van der Zwaag: Mater. Sci. Eng. A, 1999, vol. 272, pp. 250-56.10.1016/S0921-5093(99)00518-3 ↗
28. Y. Bergstrom and H. Hallen: Mater. Sci. Eng. A, 1982, vol. 55, pp. 49-61.10.1016/0025-5416(82)90083-0 ↗
29. H. Mecking and U.F. Kocks: Acta Metall., 1981, vol. 29, pp. 1865-75.10.1016/0001-6160(81)90112-7 ↗
30. F. Barlata, M.V. Glazova, J.C. Brema, and D.J. Legea, Int. J. Plasticity, 2002, vol. 18, pp. 919-39.10.1016/S0749-6419(01)00015-8 ↗
31. S. Esmaeili, D.J. Lloyd, and W.J. Poole: Acta Mater., 2003, vol. 51, pp. 2243-57.10.1016/S1359-6454(03)00028-4 ↗
32. A. Simar, Y. Bréchet, B. de Meester, A. Denquin, and T. Pardoen: Acta Mater., 2007, vol. 55, pp. 6133-43.10.1016/j.actamat.2007.07.012 ↗
33. H. Mecking and U.F. Kocks: Acta Metall., 1981, vol. 29, pp. 1865-75.10.1016/0001-6160(81)90112-7 ↗
34. Y. Estrin and H. Mecking: Acta Metall., 1984, vol. 32, pp. 57-70.10.1016/0001-6160(84)90202-5 ↗
35. E. Nes, K. Marthinsen, and Y. Bréchet: Scripta Mater., 2002, vol. 47, pp. 607-611.10.1016/S1359-6462(02)00235-X ↗
36. S. Gouttebroze, A. Mo, Q. Grong, K.O. Pedersen, and H.G. Fjaer: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 522-34.10.1007/s11661-007-9443-8 ↗
37. H. Hallen: Mater. Sci. Eng. A, 1985, vol. 72, pp. 119-23.10.1016/0025-5416(85)90150-8 ↗
38. O.R. Myhr, Q. Grong, and K.O. Pedersen: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 2276-89.10.1007/s11661-010-0258-7 ↗
39. J.C. Teixeira, L. Bourgeois, C.W. Sinclair, and C.R. Hutchinson: Acta Mater., 2009, vol. 57, pp. 6075-89.10.1016/j.actamat.2009.08.034 ↗
40. F. Zhang, A.F. Bower, and W.A. Curtin: Int. J. Numer. Methods Eng., 2011, vol. 86, pp. 70-92.10.1002/nme.3047 ↗
41. B. Berisha, P. Hora, L. Tong, A. Wahlen, and A.H. van den Boogaard: ICTP 2008, Int. Conference on Technology of Plasticity, 2008, Korea.
42. O.R. Myhr, Q. Grong, and S.J. Andersen: Acta Mater., 2001, vol. 49, pp. 65-75.10.1016/S1359-6454(00)00301-3 ↗
43. W.J. Poole, J.A. Seter, S. Skjervold, and G. Waterloo: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 2327-38.10.1007/s11661-000-0148-5 ↗
44. O.R. Myhr, Q. Grong, H.G. Fjaer, and C.D. Marioara: Acta Mater., 2004, vol. 52, pp. 4997-5008.10.1016/j.actamat.2004.07.002 ↗
45. S.I. Fujikawa: Defect Diff. Forum, 1997, vol. 403, pp. 143-47.
46. S.N. Samaras: Model. Simul. Mater. Sci. Eng., 2006, vol. 14, pp. 1271-92.10.1088/0965-0393/14/8/001 ↗
47. Q. Grong: Metallurgical Modelling of Welding, The Institute of Materials, London, 1994.
48. S. Esmaeili, D.J. Lloyd, and W.J. Poole: Acta Mater., 2003, vol. 51, pp. 3467-81.10.1016/S1359-6454(03)00167-8 ↗
49. A. Miroux, M. Ghosh, S. Kurukuri, L. Kestens, and T. van den Boogaard: Proceedings of the 12th Int. Conference on Al Alloys, Yokohama, 2010, pp. 1243–48.