journal article·2015-07Open access

Study and Suppression of the Microstructural Anisotropy Generated During the Consolidation of a Carbonyl Iron Powder by Field-Assisted Hot Pressing

Andrea García-Junceda, Laura Acebo, José Manuel Torralba

Abstract

A spherical carbonyl iron powder was consolidated by the field-assisted hot pressing technique using graphite tools at two different temperatures, both above the austenitizing temperature. The microstructures obtained exhibited a compositional gradient in carbon along the consolidated material. Thus, the outer rim of the cylindrical samples was composed of cementite and pearlite that gradually turned to pearlite, leading to a fully ferritic microstructure at the core of the sample. The increase in the temperature has led to a higher introduction of carbon within the sample. The interposition of a thin tungsten foil between the graphite die/punches and the powders has significantly reduced the diffusion of the carbon through the iron matrix and has suppressed the microstructural anisotropy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Powder Metallurgy Techniques and Materials · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. M. Omori: Mater. Sci. Eng. A, 2000, vol. 287, pp. 183-88.10.1016/S0921-5093(00)00773-5 ↗
2. R. Orrù, R. Licheri, A.M. Locci, A. Cincotti, G. Cao: Mater. Sci. Eng. R, 2009, vol. 63, pp. 127-287.10.1016/j.mser.2008.09.003 ↗
3. S. Grasso,Y. Sakka,G. Maizza: Sci. Technol. Adv. Mater., 2009, Vol. 10, pp. 1-24.10.1088/1468-6996/10/5/053001 ↗
4. D.V. Quach, J.R. Groza, A. Zavaliangos, and U. Anselmi-Tamburini: 10—Fundamentals and Applications of Field/Current Assisted Sintering: Woodhead Publishing Series in Metals and Surface Engineering, Woodhead Publishing, Abington, 2010, pp. 249–74.
5. O. Guillon, J. González-Julian, B. Dargatz, T. Kessel, G. Schierning, J. Räthel, M. Herrmann: Adv. Eng. Mater., 2014, vol. 16, pp. 830-49.10.1002/adem.201300409 ↗
6. S. Libardi, M. Zadra, F. Casari, A. Molinari: Mater. Sci. Eng. A, 2008, vol. 478, pp. 243-50.10.1016/j.msea.2007.05.111 ↗
7. M. Pellizzari, A. Fedrizzi, M. Zadra: Mater. Des., 2011, vol. 32, pp. 1796-1805.10.1016/j.matdes.2010.12.033 ↗
8. S. Pandya, K.S. Ramakrishna, A.R. Annamalai, A. Upadhyaya: Mater. Sci. Eng. A, 2012, vol. 556, pp. 271-77.10.1016/j.msea.2012.06.087 ↗
9. R. Muñoz-Moreno, E.M. Ruiz-Navas, B. Srinivasarao, J.M. Torralba: J. Mater. Sci. Technol., 2014, vol. 30, pp. 1145-54.10.1016/j.jmst.2014.08.008 ↗
10. B. Srinivasarao, J.M. Torralba, M.A. Jabbari Taleghani, M.T. Pérez-Prado: Mater. Lett, 2014, Vol. 123, pp. 75-78,10.1016/j.matlet.2014.02.086 ↗
11. K. Feng, Y. Yang, M. Hong, J. Wu, S. Lan: J. Mater. Process. Technol., 2008, vol. 208, pp. 264-69.10.1016/j.jmatprotec.2007.12.117 ↗
12. J. Räthel, M. Herrmann, W. Beckert: J. Eur. Ceram. Soc., 2009, vol. 29, pp. 1419-25.10.1016/j.jeurceramsoc.2008.09.015 ↗
13. G. Bernard-Granger, N. Benameur, C. Guizard, M. Nygren: Scr. Mater., 2009, vol. 60, pp. 164-67.10.1016/j.scriptamat.2008.09.027 ↗
14. Y. Liu, Z. Jin: Ceram. Int., 2012, vol. 38, pp. 217-22.10.1016/j.ceramint.2011.06.053 ↗
15. W. Wang, H. Kou, S.Liu, Y. Shi, J. Li, X. Feng, Y. Pan, Y. Li, J. Guo: Ceram. Int., 2015, vol. 41, pp. 2576-81.10.1016/j.ceramint.2014.11.005 ↗
16. H.K.D.H. Bhadeshia, R.W.K. Honeycombe: Steels, Third Edition, Butterworth-Heinemann, Oxford, 2006, pp. 39-70.10.1016/B978-075068084-4/50005-4 ↗
17. R.P Smith: Acta Metal., 1953, vol. 1, pp. 578-87.10.1016/0001-6160(53)90088-1 ↗
18. G.G. Tibbetts: J. Appl. Phys., 1980, vol. 51, pp. 4813-16.10.1063/1.328314 ↗
19. M. Fáberová, R. Bureš, E. Dudrová: Powder Metall. Prog., 2009, vol. 9, pp. 212-18.
20. E.O. Hall: Proc. Phys. Soc. B., 1951, vol. 64, pp. 747-53.10.1088/0370-1301/64/9/303 ↗
21. N.J. Petch: J. Iron Steel Inst., 1953, vol. 174, pp. 25-32.
22. E. Lassner, W.D. Schubert: Tungsten: Properties, Chemistry, Technology of the Element, Alloys, and Chemical Compounds, Kluwer Academic/Plenum Publishers, New York, 1999.10.1007/978-1-4615-4907-9 ↗
23. A.K. Dutta: Phys. Rev., 1953, vol. 90, pp. 187–92.10.1103/PhysRev.90.187 ↗
24. C.N. Hooker, A.R. Ubbelohde, D.A.Young: Proc. Roy. Soc. A., 1965, vol. 284, pp. 17-31.10.1098/rspa.1965.0049 ↗