journal article·2015-03

The Effect of Y/Ti Ratio on Oxide Precipitate Evolution in ODS Fe-14 Wt Pct Cr Alloys

Sheng-Yi Zhong, Joel Ribis, Nicolas Lochet, Yann de Carlan, Vincent Klosek, Vincent Ji, Marie-Hélène Mathon

Publisher page

Abstract

Fe-14Cr-1W oxide dispersion strengthened ferritic alloys have excellent mechanical properties at high temperatures due to a high density of thermally stable Y-Ti-O nanoclusters, which are rather stable at high temperature. The aim of this work was to study the evolutions of Y-Ti-O precipitation at high temperature as a function of nominal content of Y, Ti, and O. Different Fe-14Cr alloys were characterized by small-angle neutron scattering technique under magnetic field as well as transmission electron microscopy investigations before and after annealing at 1573 K to 1723 K (1300 °C to 1450 °C). Significant differences are observed depending on the Y/Ti/O ratios. For Ti/Y >1, the coarsening kinetics is low even at 1723 K (1450 °C). For Ti/Y <1, very large size particles are observed after annealing at 1573 K (1300 °C). We have shown that the oxygen content should be strictly controlled to avoid significant coarsening at 1573 K (1300 °C) and above.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fusion materials and technologies · Nuclear Materials and Properties · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Y. de Carlan, J.-L. Béchade, P. Dubuisson, J.-L. Seran, P. Billot, A. Bougault, T. Cozzika, S. Doriot, D. Hamon, J. Henry, M. Ratti, N. Lochet, D. Nunes, P. Olier, T. Leblond, and M.-H. Mathon: J. Nucl. Sci., 2009, vol. 386–388, pp. 430–32.
2. D.T. Hoelzer, J. Bentley, M.A. Sokolov, M.K. Miller, G.R. Odette, and M.J. Alinger: J. Nucl. Mater., 2007, vol. 367–370, pp. 166–72.10.1016/j.jnucmat.2007.03.151 ↗
3. R.L. Klueh, J.P. Shingledecker, R.W. Swindeman, and D.T. Hoelzer: J. Nucl. Mater., 2005, vol. 341, pp. 103–14.10.1016/j.jnucmat.2005.01.017 ↗
4. S. Ohtuska, S. Ukai, M. Fujiwara, T. Kaito, and T. Narita: Mater. Trans. A, 2005, vol. 46, pp. 487–92.10.2320/matertrans.46.487 ↗
5. S.K. Karak, J.D. Majumdar, Z. Witczak, W. Lojkowski, L. Ciupinski, K.J. Kurzydłowski, and I. Manna: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 2884–94.10.1007/s11661-013-1627-9 ↗
6. M.B. Toloczko, D.S. Gelles, F.A. Garner, R.J. Kurtz, and K. Abe: J. Nucl. Mater., 2004, vol. 329–333, pp. 352–55.10.1016/j.jnucmat.2004.04.296 ↗
7. M. Ratti, D. Leuvrey, M.-H. Mathon, and Y. de Carlan: J. Nucl. Mater., 2009, vol. 386–388, pp. 540–43.10.1016/j.jnucmat.2008.12.171 ↗
8. S. Ukai, S. Mizuta, M. Fujiwara, T. Okuda, and T. Kobayashi: J. Nucl. Sci. Technol., 2002, vol. 39, pp. 778–88.10.1080/18811248.2002.9715260 ↗
9. M.J. Alinger, G.R. Odette, and D.T. Hoelzer: Acta Mater., 2009, vol. 57, pp. 392–406.10.1016/j.actamat.2008.09.025 ↗
10. S. Yamashita, S. Ohtsuka, N. Akasaka, S. Ukai, and S. Ohnuki: Philos. Mag. Lett., 2004, vol. 84, pp. 525–29.10.1080/09500830412331303609 ↗
11. M. Klimiankou, R. Lindau, and A. Moslang: J. Nucl. Mater., 2004, vol. 329–333, pp. 347–51.10.1016/j.jnucmat.2004.04.083 ↗
12. S.Ukai, T. Okuda, M. Fujiwara, T. Kobayashi, S. Mizuta, and H. Nakashima: J. Nucl. Sci. Technol., 2002, vol. 39, pp. 872–79.10.1080/18811248.2002.9715271 ↗
13. R.L. Klueh, P.J. Maziasz, I.S. Kim, L. Heatherly, D.T. Hoelzer, N. Hashimoto, E.A. Kenik, and K. Miyahara: J. Nucl. Mater., 2002, vol. 307–311, pp. 773–77.10.1016/S0022-3115(02)01046-2 ↗
14. S.Y. Zhong, J. Ribis, V. Klosek, Y. De Carlan, N. Lochet, V. Ji, and M.H. Mathon: J. Nucl. Mater., 2012, vol. 428, pp. 154–59.10.1016/j.jnucmat.2011.12.028 ↗
15. M.H. Mathon, M. Perrut, S.Y. Zhong, and Y. de Carlan: J. Nucl. Mater., 2012, vol. 428, pp. 147–53.10.1016/j.jnucmat.2011.12.010 ↗
16. J. Ribis and Y de Carlan: Acta Mater., 2012, vol. 60, pp. 238–52.10.1016/j.actamat.2011.09.042 ↗
17. H. Sakasegawa, F. Legendre, L. Boulanger, L. Chaffron, T. Cozzika, J. Malaplate, J. Henry, Y. de Carlan, and M. Brocq: MRS. STP. Proc., 2009, vol. 1125, pp. 25–28.
18. H. Sakasegawa, F. Legendre, L. Boulanger, M. Brocq, L. Chaffron, T. Cozzika, J. Malaplate, J. Henry, and Y. de Carlan: J. Nucl. Mater., 2011, vol. 417, pp. 229–32.10.1016/j.jnucmat.2010.12.056 ↗
19. M.K. Miller, E.A. Kenik, K.F. Russell, L. Heatherly, D.T. Hoelzer, and P.J. Maziasz: Mater. Sci. Eng. A., 2003, vol. 353, pp. 140–45.10.1016/S0921-5093(02)00680-9 ↗
20. M.K. Miller, K.F. Russell, and D.T. Hoelzer: J. Nucl. Mater., 2006, vol. 351, pp. 261–68.10.1016/j.jnucmat.2006.02.004 ↗