Three-Dimensional Numerical Model Considering Phase Transformation in Friction Stir Welding of Steel
Source abstract
Abstract
A three-dimensional (3D) thermo-mechanical model is developed considering the phase transformation occurring during the friction stir welding (FSW) of steel, and the simulated result is compared with both the measured temperature distribution during FSW and the microstructural changes after FSW. The austenite grain size (AGS) decreases significantly because of the frictional heat and severe plastic deformation generated during FSW, and the decreased AGS accelerates the diffusional phase transformation during FSW. The ferrite phase, one of the diffusional phases, is developed mainly in mild steel, whereas the bainite phase transformation occurs significantly in high-strength steel with large hardenability. Additionally, transformation-induced heat is observed mainly in the stir zone during FSW. The measured temperature distribution and phase fraction agree fairly well with the predicted data.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Y. S. Sato, M. Urata, H. Kokawa, K. Ikeda and M. Enomoto, Scripta Mater 2001, vol. 45, pp. 109-1410.1016/S1359-6462(01)01000-4 ↗
2. Y. S. Sato, Y. Kurihara, S. H. C. Park, H. Kokawa and N. Tsuji, Scripta Mater 2004, vol. 50, pp. 57-6010.1016/j.scriptamat.2003.09.037 ↗
3. S. H. Kang, H. S. Chung, H. N. Han, K. H. Oh, C. G. Lee and S. J. Kim, Scripta Mater 2007, vol. 57, pp. 17-20.10.1016/j.scriptamat.2007.03.021 ↗
4. J. H. Cho, D. E. Boyce and P. R. Dawson, Mater. Sci. Eng. A Struct. 2005, vol. 398, pp. 146-6310.1016/j.msea.2005.03.002 ↗
5. J. H. Cho and P. R. Dawson, Metall Mater Trans A 2006, vol. 37A, pp. 1147-64.10.1007/s11661-006-1093-8 ↗
6. E. W. Hart, J. Eng. Mater. Technol. Trans. ASME 1976, vol. 98, pp. 193-202.10.1115/1.3443368 ↗
7. R. Nandan, G. G. Roy, T. J. Lienert and T. DebRoy, Sci. Technol. Weld. Join. 2006, vol. 11, pp. 526-37.10.1179/174329306X107692 ↗
8. R. Nandan, G. G. Roy, T. J. Lienert and T. Debroy, Acta Mater 2007, vol. 55, pp. 883-95.10.1016/j.actamat.2006.09.009 ↗
9. H. H. Cho, S. T. Hong, J. H. Roh, H. S. Choi, S. H. Kang, R. J. Steel and H. N. Han, Acta Mater 2013, vol. 61, pp. 2649-61.10.1016/j.actamat.2013.01.045 ↗
10. Y. S. Sato, T. W. Nelson and C. J. Sterling, Acta Mater 2005, vol. 53, pp. 637-45.10.1016/j.actamat.2004.10.017 ↗
11. Y. S. Sato, H. Yamanoi, H. Kokawa and T. Furuhara, Scripta Mater 2007, vol. 57, pp. 557-60.10.1016/j.scriptamat.2007.04.050 ↗
12. H. H. Cho, H. N. Han, S. T. Hong, J. H. Park, Y. J. Kwon, S. H. Kim and R. J. Steel, Mater. Sci. Eng. A-Struct. 2011, vol. 528, pp. 2889-94.10.1016/j.msea.2010.12.061 ↗
13. M. A. M. Hossain, M. T. Hasan, S. T. Hong, M. Miles, H. H. Cho and H. N. Han, Met Mater Int 2013, vol. 19, pp. 1243-50.10.1007/s12540-013-6017-8 ↗
14. H. H. Cho, S. H. Kang, S. H. Kim, K. H. Oh, H. J. Kim, W. S. Chang and H. N. Han, Mater Design 2012, vol. 34, pp. 258-67.10.1016/j.matdes.2011.08.010 ↗
15. C. M. Sellars, Mater Sci Tech Ser 1985, vol. 1, pp. 325-32.10.1179/mst.1985.1.4.325 ↗
16. M. Suehiro, K. Sato, Y. Tsukano, H. Yada, T. Senuma and Y. Matsumura, Iron Steel Inst. Jpn. 1987, vol. 27, pp. 439-4510.2355/isijinternational1966.27.439 ↗
17. P. D. Hodgson and R. K. Gibbs, Isij Int 1992, vol. 32, pp. 1329-38.10.2355/isijinternational.32.1329 ↗
18. K. Karhausen and R. Kopp, Steel Res 1992, vol. 63, pp. 247-5610.1002/srin.199200509 ↗
19. O. Kwon, Isij Int 1992, vol. 32, pp. 350-5810.2355/isijinternational.32.350 ↗
20. J. Yanagimoto and J. S. Liu, Isij Int 1999, vol. 39, pp. 171-75.10.2355/isijinternational.39.171 ↗
21. C.J. Smithells, W.F. Gale, T.C. Totemeier: Smithells Metals Reference Book. 8th ed. (Elsevier Butterworth-Heinemann, Amsterdam, 2004).
22. M. Song and R. Kovacevic, Proc Inst Mech Eng B-J Eng 2003, vol. 217, pp. 73-85.10.1243/095440503762502297 ↗
23. W. Zhang, G. G. Roy, J. W. Elmer and T. DebRoy, J Appl Phys 2003, vol. 93, pp. 3022-33.10.1063/1.1540744 ↗
24. T. Sheppard and D. S. Wright, Met Technol 1979, vol. 6, pp. 215-23.10.1179/030716979803276264 ↗
25. P. F. Kozlowski, B. G. Thomas, J. A. Azzi and W. Hao, Metall Trans A 1992, vol. 23, pp. 903-18.10.1007/BF02675567 ↗
26. James L. Kuester and Joe H. Mize: Optimization Techniques with Fortran. (McGraw-Hill, New York, 1973).
27. P. Perzyna and W. Wojno, Arch. Mech. 1966, vol. 18, pp. 85-99.
28. Y. G. Cho, Y. R. Im, J. K. Lee, D. W. Suh, S. J. Kim and H. N. Han, Metall Mater Trans A 2011, vol. 42A, pp. 2094-06.10.1007/s11661-010-0598-3 ↗
29. H. H. Cho, Y. G. Cho, Y. R. Im, J. K. Lee, J. H. Kwak and H. N. Han, J Mater Process Technol 2010, vol. 210, pp. 907-13.10.1016/j.jmatprotec.2010.02.003 ↗
30. H. N. Han and S. H. Park, Mater Sci Technol Ser 2001, vol. 17, pp. 721-26.10.1179/026708301101510447 ↗
31. P. A. Manohar, T. Chandra and C. R. Killmore, Isij Int 1996, vol. 36, pp. 1486-9310.2355/isijinternational.36.1486 ↗
32. P. A. Manohar and T. Chandra, Isij Int 1998, vol. 38, pp. 766-7410.2355/isijinternational.38.766 ↗
33. M. C. Zhao, K. Yang, F. R. Xiao and Y. Y. Shan, Mater Sci Eng A-Struct 2003, vol. 355, pp. 126-13610.1016/S0921-5093(03)00074-1 ↗
34. H. H. Cho, Y. G. Cho, D. W. Kim, S. J. Kim, W. B. Lee and H. N. Han, Isij Int 2014, vol. 54, pp. 1646-52.10.2355/isijinternational.54.1646 ↗
35. B. Dutta and C. M. Sellars, Mater Sci Technol Ser 1987, vol. 3, pp. 197-206.10.1179/mst.1987.3.3.197 ↗
36. X. K. Zhu and Y. J. Chao, J Mater Process Tech 2004, vol. 146, pp. 263-72.10.1016/j.jmatprotec.2003.10.025 ↗
37. H. Schmidt, J. Hattel and J. Wert, Model Simul Mater Sci 2004, vol. 12, pp. 143-57.10.1088/0965-0393/12/1/013 ↗
38. X. He, T. DebRoy and P. W. Fuerschbach, J Appl Phys 2004, vol. 96, pp. 4547-55.10.1063/1.1785868 ↗
39. P. P. Suikkanen, C. Cayron, A. J. DeArdo and L. P. Karjalainen, J Mater Sci Technol 2011, vol. 27, pp. 920-30.10.1016/S1005-0302(11)60165-5 ↗
40. J. Y. Kang, D. H. Kim, S. I. Baik, T. H. Ahn, Y. W. Kim, H. N. Han, K. H. Oh, H. C. Lee and S. H. Han, Isij Int 2011, vol. 51, pp. 130-36.10.2355/isijinternational.51.130 ↗