journal article·2022-02Open access

Effect of Deformation Heating on Microstructure Evolution During Hot Forging of Ti-6Al-4V

Mykola Kulakov, Salaheddin Rahimi, S. Lee Semiatin

Abstract

Abstract The effect of deformation heating on microstructure evolution during hot forging of Ti-6Al-4V was established. For this purpose, right-circular cylinders of Ti-6Al-4V with an equiaxed-α preform microstructure were preheated to a temperature between 1148 K (875 °C) and 1223 K (950 °C), and compressed to a 60-pct. height reduction in a screw press, yielding average true strain rates of ~ 5 to 20 s−1. Thermocouple measurements and corroborating finite-element-method (FEM) simulations quantified substantial deformation-heating-induced temperature increases. For all preheat temperatures, the heating transient led to an exposure above the equilibrium β transus temperature. Despite such temperature excursions, the volume fraction of equiaxed primary α in each forged billet was only slightly lower than that in the corresponding preheated condition. The source of such observations was rationalized on the basis of the (hypothesized) solute-concentration fields that develop during the heating and cooling transients experienced in high-rate deformation processing.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Titanium Alloys Microstructure and Properties · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. A.M. Sabroff, F.W. Boulger, and H.J. Henning: Forging Materials and Practices, Rheinhold Book Company, New York, 1968.
2. T. Altan, F.W. Boulger, J.R. Becker, N. Akgerman, and H.J. Henning: Forging Equipment, Materials, and Practices, Report MCIC-HB-03, Metals and Ceramics Information Center, Battelle’s Columbus Laboratories, Columbus, OH, 1973.
3. G.I. Taylor and H. Quinney: Proc. R. Soc. Lond. A., 1934, vol. 143, pp. 307–26.10.1098/rspa.1934.0004 ↗
4. D. Rittel, L. Zhang, and S. Osovski: J. Mech. Phys. Solids., 2017, vol. 107, pp. 96–114.10.1016/j.jmps.2017.06.016 ↗
5. C.K. Lieou and C.A. Bronkhorst: Paper submitted to Acta Mater., 2020.
6. N. Srinivasa and Y.V.R.K. Prasad: J. Mater. Process. Tech., 1995, vol. 51, pp. 171–92.10.1016/0924-0136(94)01602-W ↗
7. T. Seshacharyulu, S.C. Medeiros, W.G. Frazier, and Y.V.R.K. Prasad: Mater. Sci. Eng. A., 2000, vol. 284, pp. 184–94.10.1016/S0921-5093(00)00741-3 ↗
8. T. Seshacharyulu, S.C. Medeiros, W.G. Frazier, and Y.V.R.K. Prasad: Mater. Sci. Eng. A., 2002, vol. 325, pp. 112–25.10.1016/S0921-5093(01)01448-4 ↗
9. S.L. Semiatin, N.C. Levkulich, C.A. Heck, A.E. Mann, N. Bozzolo, A.L. Pilchak, and J.S. Tiley: Metall. Mater. Trans. A., 2020, vol. 51A, pp. 2291–305.10.1007/s11661-020-05673-9 ↗
10. S.L. Semiatin, N.C. Levkulich, and J.S. Tiley: Metall. Mater. Trans. A., 2021, vol. 52A, pp. 2238–60.10.1007/s11661-021-06216-6 ↗
11. N.C. Levkulich, S.L. Semiatin, E.J. Payton, S. Srivatsa, and A.L. Pilchak: Metall. Mater. Trans. A., 2021, vol. 52A, pp. 1353–67.10.1007/s11661-021-06158-z ↗
12. J.M. Sosa, D.E. Huber, B. Welk, and H.L. Fraser: Integr. Mater. Manuf. Innov., 2014, vol. 3, pp. 123–40.10.1186/2193-9772-3-10 ↗
13. F. Bachmann, R. Hielscher, and H. Schaeben: Ultramicroscopy., 2011, vol. 111, pp. 1720–33.10.1016/j.ultramic.2011.08.002 ↗
14. S.L. Semiatin, F. Montheillet, G. Shen, and J.J. Jonas: Metall. Mater. Trans. A., 2002, vol. 33A, pp. 2719–27.10.1007/s11661-002-0394-9 ↗
15. M. Kulakov, L. Da Silva, and A. Andreu: MATEC Web Conf., In Proceedings of the 14th World Conference on Titanium, 2020, vol. 321, paper# 12003, 5 pages.10.1051/matecconf/202032112003 ↗
16. J.W. Elmer, T.A. Palmer, and J. Wong: J. Appl. Phys., 2003, vol. 93, pp. 1941–7.10.1063/1.1537464 ↗
17. A.I. Ismail, M. Dehmas, E. Aeby-Gautier, and B. Appolaire: In Proceedings of the 13th World Conference on Titanium, 2016.
18. M. Boivineau, C. Cagran, D. Doytier, V. Eyraud, M.H. Nadal, B. Wilthan, and G. Pottlacher: Int. J. Thermophys., 2006, vol. 27, pp. 507–29.10.1007/PL00021868 ↗