Correlation of Local Constitutive Properties to Global Mechanical Performance of Advanced High-Strength Steel Spot Welds
Source abstract
Abstract
Recent results have shown that the strength of resistance spot-welded joints made from advanced high-strength steels (AHSS) do not increase linearly with their base metal strength. While the martensite tempering and subsequent softening in a narrow heat affected zone (HAZ) of these joints has been reported as a primary cause for this degradation, the quantitative effects of HAZ softening on above nonlinearity in different steels have not been explored. In this research, the role of material heterogeneity on load-displacement characteristics of dual-phase and martensitic AHSS with initial martensite volume fractions of 16, 58, and 100 pct during tension-shear (TS) and cross-tension (CT) testing was modeled with finite element method and compared with experimental measurements of global deformation and fracture behavior. Results from low-strength steels showed that the location of HAZ failure transitions from hardened to softened regions, as the nugget diameter increases from 4 to 6 and 8 mm, even with the presence of softening in the HAZ. At the same time, the results from higher strength steels showed more sensitivity to the softened region in larger nugget diameters. This result elucidates that the nonlinearity in strength of high-strength AHSS spot welds in comparison to lower strength of mild steel, is due to their intrinsic brittleness, as well as the overall geometry of the weld nugget. Our results also suggest that, while HAZ softening plays a detrimental role in DP steels, it helps to improve the ultimate load and global extension in high strength grades. Finally, several uncertainties related to finite element simulations and experiments have been highlighted. The results from this study can help in optimizing the resistance spot-welding process parameters and the design of the part made from AHSS.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Microstructure and Mechanical Properties of Steels · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. 1. H. Rezayat, H. Ghassemi-Armaki, S. P. Bhat, S. Sriram and S. S. Babu: J Mater Sci, 2019, vol. 54, pp. 5825–5843.10.1007/s10853-018-03276-9 ↗
2. H. Rezayat, S. S. Babu and H. Ghassemi-Armaki: in Trends in Welding Research: Proceedings of the 10th International Conference, 2016.
3. 3. H. Ghassemi-Armaki, S. Bhat, S. Kelley and S. Sadagopan: Welding Journal, 2017, vol. 96, pp. 104s-112s.
4. 4. H. Ghassemi-Armaki, E. Biro and S. Sadagopan: Isij International, 2017, vol. 57, pp. 1451-1460.10.2355/isijinternational.ISIJINT-2016-649 ↗
5. 5. E. Biro, J. R. McDermid, S. Vignier and Y. N. Zhou: Materials Science and Engineering: A, 2014, vol. 615, pp. 395-404.10.1016/j.msea.2014.07.102 ↗
6. 6. E. Biro, S. Vignier, C. Kaczynski, J. R. Mcdermid, E. Lucas, J. D. Embury and Y. N. Zhou: Isij International, 2013, vol. 53, pp. 110-118.10.2355/isijinternational.53.110 ↗
7. 7. G. Krauss and A. R. Marder: Metall Trans, 1971, vol. 2, pp. 2343-2357.10.1007/BF02814873 ↗
8. E. Biro, J. R. McDermid, J. D. Embury and Y. Zhou: Metallurgical and Materials Transactions A, 2010, vol. 41A, pp. 2348-2356.10.1007/s11661-010-0323-2 ↗
9. 9. V. H. B. Hernandez, S. S. Nayak and Y. Zhou: Metallurgical and Materials Transactions A, 2011, vol. 42, pp. 3115-3129.10.1007/s11661-011-0739-3 ↗
10. 10. V. H. B. Hernandez, S. K. Panda, Y. Okita and Y. N. Zhou: J Mater Sci, 2009, vol. 45, pp. 1638-1647.10.1007/s10853-009-4141-0 ↗
11. 11. E. Biro, J. R. McDermid, J. D. Embury and Y. Zhou: Metallurgical and Materials Transactions A, 2010, vol. 41, pp. 2348-2356.10.1007/s11661-010-0323-2 ↗
12. 12. M. Xia, E. Biro, Z. Tian and Y. N. Zhou: ISIJ international, 2008, vol. 48, pp. 809-814.10.2355/isijinternational.48.809 ↗
13. N. Yamauchi, T. Taka, K. Kunishige and N. Nagao (1982) Iron Steel Inst. Jpn. 22, pp B107–B107.
14. E. Biro, S.S. Nayak and Y. Zhou: in Trends in Welding Research: Proceedings of the 9th International Conference, 2013, pp. 201–07.
15. 15. S. Vignier, E. Biro and M. Herve: Welding in the World, 2014, vol. 58, pp. 297-305.10.1007/s40194-014-0116-0 ↗
16. 16. S. Dancette, D. Fabregue, R. Estevez, V. Massardier, T. Dupuy and M. Bouzekri: Engineering Fracture Mechanics, 2012, vol. 87, pp. 48-61.10.1016/j.engfracmech.2012.03.004 ↗
17. 17. S. Dancette, D. Fabrègue, V. Massardier, J. Merlin, T. Dupuy and M. Bouzekri: Engineering Fracture Mechanics, 2011, vol. 78, pp. 2259-2272.10.1016/j.engfracmech.2011.04.013 ↗
18. 18. S. Dancette, D. Fabrègue, V. Massardier, J. Merlin, T. Dupuy and M. Bouzekri: Engineering Failure Analysis, 2012, vol. 25, pp. 112-122.10.1016/j.engfailanal.2012.04.009 ↗
19. 19. M. Bouzekri, S. Dancette, V. Massardier, D. FabrÈgue, H. Klocker: Welding in the World, 2010, vol. 54, pp. 3-14.10.1007/BF03263485 ↗
20. S.S. Nayak, Y. Zhou, V.H.B. Hernandez, and E. Biro: in Trends in Welding Research: Proceedings of the 9th International Conference, 2013, pp. 641–49.
21. 21. M. Pouranvari and S. P. H. Marashi: Materials Science and Engineering: A, 2011, vol. 528, pp. 8337-8343.10.1016/j.msea.2011.08.017 ↗
22. 22. Y. P. Yang, S. S. Babu, F. Orth and W. Peterson: Science and Technology of Welding and Joining, 2008, vol. 13, pp. 232-239.10.1179/174329308X283901 ↗
23. 23. M. Tamizi, M. Pouranvari and M. Movahedi: Science and Technology of Welding and Joining, 2017, vol. 22, pp. 327-335.10.1080/13621718.2016.1240979 ↗
24. 24. T. Huin, S. Dancette, D. Fabrègue and T. Dupuy: Metals, 2016, vol. 6, p. 111.10.3390/met6050111 ↗
25. L. Qian, X. Wang, C. Sun and A. Dai: Materials, 2019, Doi: 10.3390/ma12060900.10.3390/ma12060900 ↗
26. 26. K. Paveebunvipak and V. Uthaisangsuk: Materials & Design, 2018, vol. 160, pp. 731-751.10.1016/j.matdes.2018.09.052 ↗
27. 27. K. Paveebunvipak and V. Uthaisangsuk: Journal of Materials Engineering and Performance, 2019, vol. 28, pp. 2017-2028.10.1007/s11665-019-03988-2 ↗
28. H. Rezayat, H. Ghassemi-Armaki, S. P. Bhat, S. Sriram, and S. S. Babu: J. Mater. Eng. Perform., 2020.
29. 29. Y. J. Chao: Science and technology of welding and joining, 2003, vol. 8, pp. 133-137.
30. 30. K. Perzynski, A. Wrozyna, R. Kuziak, A. Legwand and L. Madej: Finite Elements in Analysis and Design, 2017, vol. 124, pp. 7-21.10.1016/j.finel.2016.10.001 ↗
31. ASTM standard E8M: Tension Testing of Metallic Materials, ASTM International, West Conshohocken, PA, 1998.
32. ASTM standard E3-01: Standard Practice for Preparation of Metallographic Specimens, ASTM International, West Conshohocken, PA, 2001.
33. 33. Michael Smith: ABAQUS (2011) ‘ABAQUS Documentation’, Dassault Systèmes, Providence, RI, USA.
34. American Welding Society: AWS/SAE D8.9 M: Recommended practices for test methods for evaluating the resistance spot welding behavior of automotive sheet steel materials, 2012.
35. 35. H. G. Koenigsberger: Am Hist Rev, 1977, vol. 82, pp. 946-948.10.2307/1865156 ↗
36. 36. G. B. An, S. K. Nam and T. W. Jang: Materials Science Forum, 2008, vol. 580-582, pp. 589-592.10.4028/www.scientific.net/MSF.580-582.589 ↗
37. 37. C. C. Tasan, M. Diehl, D. Yan, C. Zambaldi, P. Shanthraj, F. Roters and D. Raabe: Acta Materialia, 2014, vol. 81, pp. 386-400.10.1016/j.actamat.2014.07.071 ↗
38. 38. C. C. Tasan, J. P. M. Hoefnagels, M. Diehl, D. Yan, F. Roters and D. Raabe: International Journal of Plasticity, 2014, vol. 63, pp. 198-210.10.1016/j.ijplas.2014.06.004 ↗