Preparation of Ultrafine W-10 Wt Pct Cu Composite Powders and Their Corresponding Sintered Compacts
Source abstract
Abstract
We propose a process to produce ultrafine W-10 wt pct Cu composite powders by reducing the mixtures of copper tungstate (CuWO4) and tungsten trioxide (WO3) (from the calcination of a mixture of ammonium paratungstate and copper nitrate trihydrate) with carbon black and hydrogen. First, ultrafine pre-reduced tungsten-copper (W-Cu) powders containing a small amount of WO2 were produced by reducing mixtures of CuWO4 and WO3 with insufficient carbon black; then the obtained products were further reduced by hydrogen to remove the residual oxygen. This method provides a simple and low-cost route to prepare ultrafine W-10 wt pct Cu composite powders. The composite powders were sintered at different temperatures [1323 K (1050 °C), 1373 K (1100 °C), 1423 K (1150 °C), 1473 K (1200 °C), and 1523 K (1250 °C)] for 3 hours. A maximum densification of the obtained compact was achieved at a sintering temperature of 1523 K (1250 °C), with a relative density, Vickers hardness and thermal conductivity of the W-10 wt pct Cu composites of 97.8 pct, 365 HV and 165 W/m K, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Metal and Thin Film Mechanics · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. [1] S.H. Lee, S.Y. Kwon, and H.J. Ham, Thermochim. Acta, 2012, vol. 542, pp. 2-5.10.1016/j.tca.2012.03.022 ↗
2. [2] M. Ardestani, H. Arabi, H.R. Rezaie, and H. Razavizadeh, Int. J. Refract. Met. Hard Mater., 2009, vol. 27, pp. 796-800.10.1016/j.ijrmhm.2009.01.001 ↗
3. [3] P. Chen, G. Luo, Q. Shen, M. Li, and L. Zhang, Mater. Design, 2013, vol. 46, pp. 101-05.10.1016/j.matdes.2012.09.034 ↗
4. [4] Y.D. Kim, N.L. Oh, ST Oh, and I.H. Moon, Mater. Lett., 2001, vol. 51, pp. 420-24.10.1016/S0167-577X(01)00330-5 ↗
5. [5] J. Korab, P.Štefánik, Š. Kavecký, P. Šebo, and G. Korb, Compos. Part A-Appl. S., 2002, vol. 33, pp. 577-81.10.1016/S1359-835X(02)00003-9 ↗
6. [6] M. Ahangarkani, K.Z. Madar, S. Borji, and Z. Valefi, Int. J. Refract. Met. Hard Mater., 2017, vol. 67, pp. 115-24.10.1016/j.ijrmhm.2017.05.009 ↗
7. [7] W. Chen, L. Dong, H. Zhang, J. Song, N. Deng, and J. Wang, Mater. Lett., 2017, vol. 205, pp. 198-201.10.1016/j.matlet.2017.06.090 ↗
8. [8] E. Tejado, A.V. Müller, J.H. You, and J.Y. Pastor, J. Nucl. Mater., 2018, vol. 498, pp. 468-75.10.1016/j.jnucmat.2017.08.020 ↗
9. [9] L.J. Kecskes, B.R. Klotz, K.C. Cho, R.J. Dowding, and M.D. Trexler, Metall. Mater. Trans. A, 2001, vol. 32, pp. 2885-93.10.1007/s11661-001-1039-0 ↗
10. Ho PW, Li QF, Fuh JYH (2008) Mater Sci Eng A 485:657-6310.1016/j.msea.2007.10.048 ↗
11. [11] A.G. Hamidi, H. Arabi, and S. Rastegari, Int. J. Refract. Met. Hard Mater., 2011, vol. 29, pp. 538-41.10.1016/j.ijrmhm.2011.03.009 ↗
12. [12] J.L. Johnson, Int. J. Refract. Met. Hard Mater., 2015, vol. 53, pp. 80-86.10.1016/j.ijrmhm.2015.04.030 ↗
13. [13] Y. Li, J. Zhang, G. Luo, Q. Shen, and L. Zhang, Int. J. Refract. Met. Hard Mater., 2018, vol. 71, pp. 255-61.10.1016/j.ijrmhm.2017.11.042 ↗
14. [14] S.H. Hong, and B.K. Kim, Mater. Lett., 2003, vol. 57, pp. 2761-67.10.1016/S0167-577X(03)00071-5 ↗
15. [15] Y. Guo, H. Guo, B. Gao, X. Wang, Y. Hu, and Z. Shi, J. Alloy Compd., 2017, vol. 724, pp. 155-62.10.1016/j.jallcom.2017.07.023 ↗
16. [16] X. Shi, H. Yang, S. Wang, G. Shao, X. Duan, Z. Xiong, and T. Wang, Mater. Chem. Phys., 2007, vol. 104, pp. 235-39.10.1016/j.matchemphys.2007.03.032 ↗
17. [17] G.G. Lee, G.H. Ha, and B.K. Kim, Powder Metall., 2000, vol. 43, pp. 79-82.
18. [18] D.G. Kim, K.W. Lee, S.T. Oh, and Y.D. Kim, Mater. Lett., 2004, vol. 58, pp. 1199-203.10.1016/j.matlet.2003.08.035 ↗
19. [19] G. Pintsuk, I. Smid, J.E. Döring, W. Hohenauer, and J. Linke, J. Mater. Sci., 2007, vol. 42, pp. 30-39.10.1007/s10853-006-1039-y ↗
20. [20] J. Cheng, C. Lei, E. Xiong, Y. Jiang, and Y. Xia, J. Alloy Compd., 2006, vol. 421, pp. 146-50.10.1016/j.jallcom.2005.08.087 ↗
21. [21] T.H. Kim, J.H. Yu, and J.S. Lee, NanoStruct. Mater., 1997, vol. 9, pp. 213-16.10.1016/S0965-9773(97)00056-1 ↗
22. [22] A.K. Basu, and F.R. Sale, J. Mater. Sci., 1978, vol. 13, pp. 2703-11.10.1007/BF02402759 ↗
23. [23] M.H. Maneshian, and A. Simchi, J. Alloy Compd., 2008, vol. 463, pp. 153-59.10.1016/j.jallcom.2007.08.080 ↗
24. [24] W.T. Qiu, Y. Pang, Z. Xiao, and Z. Li, Int. J. Refract. Met. Hard Mater., 2016, vol. 61, pp. 91-97.10.1016/j.ijrmhm.2016.07.013 ↗
25. [25] S.S. Ryu, Y.D. Kim, and I.H. Moon, J. Alloy Compd., 2002, vol. 335, pp. 233-40.10.1016/S0925-8388(01)01805-9 ↗
26. [26] M.H. Maneshian, A. Simchi, and Z.R. Hesabi, Mat. Sci. Eng. A, 2007, vol. 445-446, pp. 86-93.10.1016/j.msea.2006.09.005 ↗
27. [27] S.N. Alam, Mat. Sci. Eng. A, 2006, vol. 433, pp. 161-68.10.1016/j.msea.2006.06.049 ↗
28. [28] A. Dolatmoradi, S. Raygan, and H. Abdizadeh, Powder Technol., 2013, vol. 233, pp. 208-14.10.1016/j.powtec.2012.08.013 ↗
29. [29] S.S. Ryu, H.R. Park, Y.D. Kim, and H.S. Hong, Int. J. Refract. Met. Hard Mater., 2017. vol. 65, pp. 39-44.10.1016/j.ijrmhm.2016.11.012 ↗
30. [30] C. Li, Y. Zhou, Y. Xie, D. Zhou, and D. Zhang, J. Alloy Compd., 2018, vol. 731, pp. 537-45.10.1016/j.jallcom.2017.10.081 ↗
31. [31] M. Hashempour, H. Razavizadeh, H.R. Rezaie, and M.T. Salehi, Mater. Charact., 2009, vol. 60, pp. 1232-40.10.1016/j.matchar.2009.05.001 ↗
32. [32] B. Sun, J. Song, Y. Yu, Z. Zhuang, M. Niu, Y. Liu, T. Zhang, and Y. Qi, Int. J. Refract. Met. Hard Mater., 2014, vol. 45, pp. 76-79.10.1016/j.ijrmhm.2014.04.005 ↗
33. [33] A.C. Franciné, A.G.P.D. Silva, and U.U. Gomes, Powder Technol., 2003, vol. 134, pp. 123-32.10.1016/S0032-5910(03)00123-2 ↗
34. [34] E. Ahmadi, M. Malekzadeh, and S.K. Sadrnezhaad, Int. J. Refract. Met. Hard Mater., 2009, vol. 28, pp. 441-45.10.1016/j.ijrmhm.2010.02.002 ↗
35. [35] G.D. Sun, K.F. Wang, C.M. Song, and G.H. Zhang, Int. J. Refract. Met. Hard Mater., 2019, vol. 78, pp. 100-06.10.1016/j.ijrmhm.2018.08.013 ↗
36. [36] C. Liang, F. Tian, Z. Wei, Q. Xin, and C. Li, Nanotechnology, 2003, vol. 14, pp. 196-205.10.1088/0957-4484/14/2/319 ↗
37. [37] X.P. Ji, W.C. Cao, C.Y. Bu, K. He, Y.D. Wu, and G.H. Zhang, Int. J. Refract. Met. Hard Mater., 2019, vol. 81, pp. 955-58.
38. [38] D.S. Venables, and M.E. Brown, Thermochim. Acta, 1996, vol. 282-283, pp. 265-76.10.1016/0040-6031(96)02813-4 ↗
39. [39] T. Zimmerl, W.D. Schubert, A. Bicherl, and A. Bock, Int. J. Refract. Met. Hard Mater., 2017, vol. 62, pp. 87-96.10.1016/j.ijrmhm.2016.06.015 ↗
40. [40] V.L. Boris, Thermochim. Acta, 2000, vol. 360, pp. 109-20.10.1016/S0040-6031(00)00540-2 ↗
41. [41] Y. Shen, J. Mater. Chem. A, 2015, vol. 3, pp. 13114-88.10.1039/C5TA01228G ↗
42. [42] D.G. Kim, B.H. Lee, S.T. Oh, Y.D. Kim, and S.G. Kang, Mat. Sci. Eng. A, 2005, vol. 395, pp. 333-37.10.1016/j.msea.2004.12.052 ↗
43. [43] J. Cheng, P. Song, Y. Gong, Y. Cai, and Y. Xia, Mat. Sci. Eng. A, 2008, vol. 488, pp. 453-57.10.1016/j.msea.2007.11.022 ↗
44. [44] J. Fan, T. Liu, S. Zhu, and Y. Han, Int. J. Refract. Met. Hard Mater., 2012, vol. 30, pp. 33-37.10.1016/j.ijrmhm.2011.06.011 ↗