journal article·2019-10-15Open access

Comprehensive Analysis of the Effect of Ausforming on the Martensite Start Temperature in a Fe-C-Mn-Si Medium-Carbon High-Strength Bainite Steel

Junyu Tian, Guanghui Chen, Yaowen Xu, Zhengyi Jiang, Guang Xu

Abstract

The comprehensive effect of strain and ausforming temperature on the martensite start temperature (MS) of a medium-carbon bainite steel was investigated by thermal simulation, optical microscope, scanning electron microscope, etc. It is already known that small strain increases the MS, while larger strain decreases the MS. However, the effect of ausforming temperature on the MS has not been reported and clarified. In this study, the concepts of critical strain (ec) and saturated strain (es) are proposed. The MS at the critical strain is equal to the MS of the nondeformed specimen. The saturation strain, which is first observed, is the strain value, and the MS does not further decrease with the increasing strain. The results show that the MS depends on the strain amount of ausforming but is not affected by the ausforming temperature. Moreover, with the increase of strain amount and ausforming temperature, the length of the martensite laths decreases. In addition, the hardness of the specimen increases with the increase of the ausforming strain amount, whereas the ausforming temperature has little effect on the hardness.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. H.J. Hu, G. Xu, L. Wang, Z.L. Xue, Y.L. Zhang, and G.H. Liu: Mater. Des., 2015, vol. 84, pp. 95–99.10.1016/j.matdes.2015.06.133 ↗
2. Y.X. Zhou, X.T. Song, J.W. Liang, Y.F. Shen, and R.D.K. Misra: Mater. Sci. Eng. A, 2018, vol. 718, pp. 267–76.10.1016/j.msea.2018.01.120 ↗
3. J. Zhao, K. Guo, Y.M. He, Y.F. Wang, and T.S. Wang: Scripta Mater., 2018, vol. 152, pp. 20–23.10.1016/j.scriptamat.2018.04.005 ↗
4. G.H. Chen, G. Xu, H.S. Zurob, H.J. Hu, and X.L. Wan: Metall. Mater. Trans. A, 2019, vol. 50A, pp. 573–80.10.1007/s11661-018-5051-z ↗
5. C. García-mateo, F.G. Caballero, and H.K.D.H. Bhadeshia: Mater. Sci. Forum, 2015, vol. 112, pp. 285–88.
6. F.G. Caballero, C. García-mateo, and M.K. Miller: JOM, 2014, vol. 66, pp. 747–55.10.1007/s11837-014-0908-0 ↗
7. F.G. Caballero, C. García-mateo, C. Capdevila, and C. García de Andrés: Mater. Manuf. Process., 2007, vol. 22, pp. 502–06.10.1080/10426910701236023 ↗
8. M. Maalekian, E. Kozeschnik, S. Chatterjee, and H.K.D.H. Bhadeshia: Met. Sci. J., 2007, vol. 23, pp. 610–12.
9. S. Chatterjee, H.S. Wang, J.R. Yang, and H.K.D.H. Bhadeshia: Met. Sci. Technol., 2006, vol. 22, pp. 641–44.10.1179/174328406X86128 ↗
10. J.R. Strife, M.J. Carr, and G.S. Ansell: Metall. Trans. A, 1976, vol. 8A, pp. 1471–84.
11. M. Zhang, Y.H. Wang, C.L. Zheng, F.Z. Zhang, and T.S. Wang: Mater. Des., 2014, vol. 62, pp. 168–74.10.1016/j.matdes.2014.05.024 ↗
12. M. Zhang, Y.H. Wang, C.L. Zheng, F.Z. Zhang, and T.S. Wang: Mater. Sci. Eng. A, 2014, vol. 596, pp. 9–14.10.1016/j.msea.2013.11.097 ↗
13. T. Sadasue, S. Suzuki, M. Suwa, S. Mitao, and K. Takahashi: Mater. Sci. Forum, 2003, vol. 426, pp. 1493–98.10.4028/www.scientific.net/MSF.426-432.1493 ↗
14. T.S. Wang, M. Zhang, Y.H. Wang, J. Yang, and F.C. Zhang: Scripta Mater., 2013, vol. 68, pp. 162–65.10.1016/j.scriptamat.2012.10.016 ↗
15. B.B. He, W. Xu, and M.X. Huang: Mater. Sci. Eng. A, 2014, vol. 609, pp. 141–46.10.1016/j.msea.2014.04.108 ↗
16. Y.C. Liu, D.J. Wang, F. Sommer, and E.J. Mittemeijer: Acta Mater., 2008, vol. 56, pp. 3833–42.10.1016/j.actamat.2008.04.015 ↗
17. H.J. Hu, G. Xu, L. Wang, M.X. Zhou, and Z.L. Xue: Metall. Mater. Int., 2015, vol. 21, pp. 929–35.10.1007/s12540-015-5156-5 ↗
18. L.C. Chang and H.K.D.H. Bhadeshia: Mater. Sci. Eng. A, 1994, vol. 184, pp. 17–19.10.1016/0921-5093(94)91079-0 ↗
19. G. Xu, H. Zou, and C.H. Bu: Adv. Mater. Res., 2011, vol. 415, pp. 974–78.
20. J.G. He, A.M. Zhao, C. Zhi, and H.L. Fan: Scripta Mater., 2015, vol. 107, pp. 71–74.10.1016/j.scriptamat.2015.05.023 ↗
21. H.J. Hu, H.S. Zurob, G. Xu, D. Embury, and G.R. Purdy: Mater. Sci. Eng. A, 2015, vol. 626, pp. 34–40.10.1016/j.msea.2014.12.043 ↗
22. H.J. Hu, G. Xu, L. Wang, and M.X. Zhou: Steel Res. Int., 2017, vol. 83, pp. 1–7.
23. G.H. Chen, G. Xu, H.J. Hu, Q. Yuan, and Q.X. Zhang: Steel Res. Int., 2018, vol. 89, pp. 1–5.
24. M.T. Todinov, J.F. Knott, and M. Strangwood: Acta Mater., 1996, vol. 44, pp. 4909–15.10.1016/S1359-6454(96)00097-3 ↗
25. J.R. Patel and M. Cohen: Acta Metall., 1953, vol. 1, pp. 531–38.10.1016/0001-6160(53)90083-2 ↗
26. J.X. Wu, B.H. Jiang, and T.Y. Hsu: Acta Metall. Sinica, 1988, vol. 36, pp. 1521–26.10.1016/0001-6160(88)90219-2 ↗
27. Y. Tian, A. Borgenstam, and P. Hedström: J. Alloys Compd., 2018, vol. 766, pp. 131–39.10.1016/j.jallcom.2018.06.326 ↗
28. X.D. Zhang, J.Q. Ren, and X.D. Ding: Appl. Compos. Mater., 2019, vol. 26, pp. 455–67.10.1007/s10443-018-9701-5 ↗
29. M. Eskandari, M.A. Mohtadi-Bonab, A. Zarei-Hanzaki, A.G. Odeshi, and J.A. Szpunar: J. Mater. Eng. Perform., 2016, vol. 25, pp. 1611–20.10.1007/s11665-016-1923-9 ↗
30. M.F. Ashby: Philos. Mag. A, 1970, vol. 21, pp. 399–24.10.1080/14786437008238426 ↗
31. A. Kundu and D.P. Field: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 3274–82.10.1007/s11661-018-4693-1 ↗
32. T. Song and B.C.D. Cooman: ISIJ Int., 2014, vol. 54, pp. 2394–03.10.2355/isijinternational.54.2394 ↗
33. S. Dash and N. Brown: Acta Metall., 1966, vol. 14, pp. 595–03.10.1016/0001-6160(66)90067-8 ↗
34. L. Samek, E.D. Moor, J. Penning, and B.C.D. Cooman: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 109–124.10.1007/s11661-006-0157-0 ↗