journal article·2018-12Open access

Characterization of Nb Interface Segregation During Welding Thermal Cycle in Microalloyed Steel by Atom Probe Tomography

H. H. Wang, J. Wang, Z. Tong, P. D. Hodgson, X. L. Wan, K. M. Wu, R. Wei, I. Timokhina

Abstract

Coarse-grained, welding heat-affected zone microstructure was simulated in a Nb-bearing microalloyed steel. The granular bainite with a great number of martensite-austenite (M-A) constituents was the predominant phase. Using atom probe tomography (APT), the distributions of niobium at prior austenite grain boundary (PAGB), ferrite/martensite-austenite (M-A) constituent interface (FMAI), and ferrite/ferrite interface (FFI) were investigated. The binding energy of Nb atom and vacancy was predicted to be 0.45 eV, indicating that Nb segregation by welding thermal cycle is probably a result of the nonequilibrium mechanism. The maximum enrichment of Nb was found at FMAI with enrichment factor of 3.50. Intermediate enrichment of Nb was at PAGB with enrichment factor of 3.12. The interfacial excess of Nb solute element ГNb at PAGB determined by APT was 0.27 × 1019 atoms/m2. The segregation energy was calculated to be 22.91 kJ/mol. The minimum enrichment of Nb was at FFI with an enrichment factor of 1.80.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Materials Characterization Techniques · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. P. Kirkword: The Chinese Society for Metals (CSM) and Chinese Academy of Engineering (CAE), Hangzhou, China, 2015, pp. 439–45.
2. E. El-Kashif, and T. Koseki: Chapter 4 Effect of Niobium on HAZ Toughness of HSLA Steels. Alloy Steel—Properties and Use, 2011, INTECH10.5772/26806 ↗
3. Y.Q. Zhang, H.Q. Zhang, J.F. Li, and W.M. Liu: J. Iron. Steel. Res. Int., 2009, vol. 16, pp. 73–80.10.1016/S1006-706X(10)60014-3 ↗
4. N.E. Hannerz: Weld J Res Suppl., 1975, vol. 5, pp. 162–68.
5. K. Hulka, and F. Heisterkamp:. ASM, 1984, pp. 915–24.
6. R.J. Hattingh and G. Pienaar: Int. J. Pres. Ves. Pip., 1998, vol. 75, pp. 661–77.10.1016/S0308-0161(98)00066-0 ↗
7. S. Shanmugam, R.D.K. Misra, T. Mannering, D. Panda, and S.G. Jansto: Mater. Sci. Eng. A., 2006, vol. 437, pp. 436–45.10.1016/j.msea.2006.08.007 ↗
8. A.B. Rothwell. Heat-Affected Zone Toughness of Welded Joints in Microalloyed Steels, Part I. IIW Document. 1979, vol. IX-1147–80.
9. R.E. Dolby:Research Bulletin., 1977, vol. 7, pp. 298–313.
10. B. Hutchinson, J. Komenda, G. S. Rohrer, and H. Beladi: Acta Mater., 2015, vol. 97, pp. 380–91.10.1016/j.actamat.2015.05.055 ↗
11. Y.Q. Zhang, H.Q. Zhang, W.M. Liu, and H. Hou: Mater. Sci. Eng., A. 2009, vol. 499, pp. 182–86.10.1016/j.msea.2007.10.118 ↗
12. P.R. Kirkwood: The Weldability of Modern Niobium Microalloyed Structural Steels, Singapore., 2012, vol. 12, pp. 5–7.
13. Y. Li, D.N. Crowther, M.J.W. Green, P.S. Mitchell, and T.N. Baker: ISIJ International., 2001, vol. 41, pp. 46–55.10.2355/isijinternational.41.46 ↗
14. C. Fossaert, G. Rees, T. Maurickx, and H.K.D.H. Bhadeshia: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 21–30.10.1007/BF02669791 ↗
15. T. Furuhara, T. Yamaguchi, G. Miyamoto, and T. Maki: Mater. Sci. Technol., 2010, vol. 26, pp. 392–97.10.1179/026708309X12512744 ↗
16. F. Barbaro, Z.X. Zhu, L. Kuzmilova, H.J. Li, and H. Jian: TMS 2015, Hangzhou, International Conference in HSLA Steels 2015, Microalloying 2015 & Offshore Engineering Steels, 2015, pp. 453–57.10.1002/9781119223399.ch53 ↗
17. H.H. Wang, Z.P. Qin, X.L. Wan, R.Wei, K.M. Wu, and R.D.K. Misra: Met. Mater. Int., 2017, 23.10.1007/s12540-017-6776-8 ↗
18. I. Timokhina, P.D. Hodgson, and E. Pereloma: Mater. Trans. A., 2004, vol. 35, pp. 2331–41.10.1007/s11661-006-0213-9 ↗
19. D. McLean: Grain Boundaries in Metals. Clarendon Press, Oxford, 1957. pp. 124.
20. H. Jin, I. Elfimov, and M. Militzer: J. Appl. Phys., 2014, vol. 15:093506-1–8.
21. N. Maruyama, and G.D.W. Smith, A. Cerezo: Mater. Sci. Eng. A., 2003, vol. 353, pp. 126–32.10.1016/S0921-5093(02)00678-0 ↗
22. J.F. Peter, R.K. Chris, G.W. Jim, R.C. Kristin, P.R. Simon, and M.C. Julie: Acta Mater., 2012, vol. 60, pp. 5049–55.10.1016/j.actamat.2012.06.013 ↗
23. L. Karlsson: Acta Metall., 1988, vol. 36, pp. 25–34.10.1016/0001-6160(88)90025-9 ↗
24. M.K. Miller, and R.G. Forbes: Atom-Probe Tomography: The Local Electro Atom Probe. Springer, New York, 2014.10.1007/978-1-4899-7430-3 ↗
25. A.H. Cottrell (1967) An Introduction to Metallurgy. London: Edward Arnold.
26. T.D. Xu: Scripta Mater., 1997, vol. 37, pp. 1643–50.10.1016/S1359-6462(97)00317-5 ↗
27. L. Karlesson, H. Norden, and H. Odelius: Acta Metall., 1988, vol. 36, pp. 1–12.10.1016/0001-6160(88)90023-5 ↗
28. F. Danoix, E. Bémont, P. Maugis, and D. Blavette: Adv. Eng. Mater., 2006, vol. 8, pp. 1202–05.10.1002/adem.200600225 ↗
29. D. McLean (1957) Grain Boundaries in Metals. Clarendon Press, Oxford, pp. 116.
30. B.W. Krakauer, and D.N. Seidman: Phys. Rev. B., 1993, vol. 48, pp. 6724–27.10.1103/PhysRevB.48.6724 ↗
31. M. Suehiro, Z.-K. Liu and J. Ågren: Acta mater., 1996, vol. 44, pp. 4241–51.10.1016/S1359-6454(96)00036-5 ↗
32. C. Sinclair, C. Hutchinson, and Y. Bréchet: Metall. Mater. Trans. A., 2007, vol. 38, pp. 821–30.10.1007/s11661-007-9106-9 ↗
33. T. Gladman: The Physical Metallurgy of Microalloyed Steels Institute of Materials, Institute of Materials, Minerals & Mining (IOM3), London, 1997.
34. C.R. Hutchinson, H.S. Zurob, and Y. Bréchet: Metall. Mater. Trans., 2006, vol. 37, pp. 1711–20.10.1007/s11661-006-0114-y ↗
35. A.J. DeArdo. Niobium in modern steels, INT MATER REV., 2003, vol. 48, pp. 371–402.10.1179/095066003225008833 ↗
36. L. Wang, S. Parker, A. Rose, G. West, and R. Thomson, Metall. Mater. Trans. A., 2016, vol. 47, pp. 3387-96.10.1007/s11661-016-3548-x ↗
37. C. Capdevila, F.G. Caballero and C. García de Andrés: ISIJ Int., 2002, vol. 42, pp. 894–902.10.2355/isijinternational.42.894 ↗
38. H.K.D.H. Bhadeshia, and R.W.K. Honeycombe: Steels: Microstructure and Properties, 3rd ed., University of Cambridge, Cambridge, 2006, pp. 117.