journal article·2018-11

Microstructure and Mechanical Properties of In Situ TiB/TiC Particle-Reinforced Ti-5Al-5Mo-5V-3Cr Composites Synthesized by Spark Plasma Sintering

Steffen Grützner, Lutz Krüger, Christian Schimpf, Markus Radajewski, Ines Schneider

Publisher page

Abstract

In situ TiB and TiC particle-reinforced titanium matrix composites (TMCs) based on a near-β Ti-5Al-5Mo-5V-3Cr alloy (Ti-5553) reacting chemically with B4C were processed by spark plasma sintering (SPS). The influence of powder milling parameters (low-energy mixing or high-energy milling) on the chemical reaction behavior between the matrix and the B4C particles during sintering was investigated. Taking the microstructure into account, characterization of the particle strengthening effect was carried out under compressive loading conditions. High-energy milling resulted in a significantly higher degree of B4C conversion during sintering. This was attributed to plastic deformation of the initial matrix powder and more homogeneous distribution of the B4C particles accompanied by a significant reduction in cluster formation. In comparison to the unreinforced Ti-5553 matrix, the hardness, stiffness, and compressive strength of the TMCs were successfully increased due to particle reinforcement. The powder milling treatment improved these properties further—a phenomenon directly associated with the higher degree of B4C conversion. Instead of the expected formation of stoichiometric TiC, the formation of nonstoichiometric TiC1−x with x ≈ 0.5 was observed. Molybdenum, vanadium, and chromium formed a solid solution in TiB and TiC1−x. Additionally, the titanium content in the matrix particles was markedly reduced, while the aluminum content roughly doubled.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Advanced materials and composites · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. 1. Z.F. Yang, W.J. Lu, D. Xu, J.N. Qin, and D. Zhang: J. Alloys Compd., 2006, vol. 419, pp. 76-80.10.1016/j.jallcom.2005.09.055 ↗
2. 2. L. Yanbin, L. Yong, T. Huiping, W. Bin, and L. Bin: J. Alloys Compd., 2011, vol. 509, pp. 3592-601.10.1016/j.jallcom.2010.12.086 ↗
3. 3. S. Gorsse and D. Miracle: Acta Mater., 2003, vol. 51, pp. 2427-42.10.1016/S1359-6454(02)00510-4 ↗
4. 4. L.J. Huang, L. Geng, H.Y. Xu, and H.X. Peng: Mat. Sci. Eng. A, 2011, vol. 528, pp. 2859-62.10.1016/j.msea.2010.12.046 ↗
5. 5. S.C. Tjong and Y.-W. Mai: Compos. Sci. Technol., 2008, vol. 68, pp. 583-601.10.1016/j.compscitech.2007.07.016 ↗
6. 6. S. Grützner, L. Krüger, M. Radajewski, and I. Schneider: Metals, 2018, vol. 8, p. 377.10.3390/met8060377 ↗
7. 7. S. Li, K. Kondoh, H. Imai, B. Chen, L. Jia, and J. Umeda: Mat. Sci. Eng. A, 2015, vol. 628, pp. 75-83.10.1016/j.msea.2015.01.033 ↗
8. 8. Z.Y. Ma, S.C. Tjong, and L. Gen: Scripta Mater., 2000, vol. 42, pp. 367-73.10.1016/S1359-6462(99)00354-1 ↗
9. 9. W.O. Soboyejo, R.J. Lederich, and S. Sastry: Acta Metall. Mater., 1994, vol. 42, pp. 2579-91.10.1016/0956-7151(94)90199-6 ↗
10. 10. D.R. Ni, L. Geng, J. Zhang, and Z.Z. Zheng: Scripta Mater., 2006, vol. 55, pp. 429-32.10.1016/j.scriptamat.2006.05.024 ↗
11. 11. H. Feng, Y. Zhou, D. Jia, Q. Meng, and J. Rao: Cryst. Growth Des., 2006, vol. 6, pp. 1626-30.10.1021/cg050443k ↗
12. 12. A. Carman, L.C. Zhang, O.M. Ivasishin, D.G. Savvakin, M.V. Matviychuk, and E.V. Pereloma: Mater. Sci. Eng. A, 2011, vol. 528, pp. 1686-93.10.1016/j.msea.2010.11.004 ↗
13. K. Srinivasa Vadayar, S. Devaki Rani, and V.V. Bhanu Prasad: Int. J. Theor. Appl. Res. Mech. Eng., 2013, vol. 2, pp. 12-16.
14. 14. R. Atri, K. Ravichandran, and S. Jha: Mater. Sci. Eng. A, 1999, vol. 271, pp. 150-59.10.1016/S0921-5093(99)00198-7 ↗
15. 15. J. Zhang, W. Ke, W. Ji, Z. Fan, W. Wang, and Z. Fu: Mater. Sci. Eng. A, 2015, vol. 648, pp. 158-63.10.1016/j.msea.2015.09.067 ↗
16. 16. A. Jimoh, I. Sigalas, and M. Hermann: Mater. Sci. Appl., 2012, vol. 03, pp. 30-35.
17. D. Alman and J. Hawk: Wear, 1999, 225-229, Part 1, pp. 629-39.10.1016/S0043-1648(99)00065-4 ↗
18. 18. I.Y. Kim, B.J. Choi, Y.J. Kim, and Y.Z. Lee: Wear, 2011, vol. 271, pp. 1962-65.10.1016/j.wear.2010.12.072 ↗
19. 19. P. Mogilevsky, E.Y. Gutmanas, I. Gotman, and R. Telle: J. Eur. Ceram. Soc., 1995, vol. 15, pp. 527-35.10.1016/0955-2219(95)00014-L ↗
20. 20. D. Brodkin, S.R. Kalidindi, M.W. Barsoum, and A. Zavaliangos: J. Am. Ceram. Soc., 1996, vol. 79, pp. 1945-52.10.1111/j.1151-2916.1996.tb08017.x ↗
21. 21. H. Zhao and Y.-B. Cheng: Ceram. Int., 1999, vol. 25, pp. 353-58.10.1016/S0272-8842(98)00048-0 ↗
22. 22. D. Vallauri, I.C. Atías Adrián, and A. Chrysanthou: J. Eur. Ceram. Soc., 2008, vol. 28, pp. 1697-713.10.1016/j.jeurceramsoc.2007.11.011 ↗
23. 23. K.S. Ravi Chandran, K.B. Panda, and S.S. Sahay: JOM, 2004, vol. 56, pp. 42-48.10.1007/s11837-004-0127-1 ↗
24. 24. K. Morsi and V.V. Patel: J. Mater. Sci., 2007, vol. 42, pp. 2037-47.10.1007/s10853-006-0776-2 ↗
25. 25. S.R. Nutt and A. Needleman: Scripta Metall., 1987, vol. 21, pp. 705-10.10.1016/0036-9748(87)90389-9 ↗
26. 26. S. Ranganath, T. Roy, and R.S. Mishra: Mater. Sci. Technol., 1996, vol. 12, pp. 219-26.10.1179/026708396790165740 ↗
27. 27. N. Shi and R.J. Arsenault: Scripta Metall. et Mater., 1993, vol. 28, pp. 623-28.10.1016/0956-716X(93)90207-9 ↗
28. 28. R. Young: The Rietveld Method, 2002nd ed., Oxford University Press, Oxford, 2002.
29. 29. L. Lutterotti, S. Matthies, and H.R. Wenk: Newsletter of the CPD, 1999, vol. 21, pp. 14-15.
30. S. Veeck, D. Lee, R. Boyer, and R. Briggs: Adv. Mater. Processes, 2004, vol. 162, pp. 47-49.
31. 31. G. Tsagareishvili, T. Nakashidze, J. Jobava, G. Lomidze, D. Khulelidze, D. Tsagareishvili, and O. Tsagareishvili: J. Less-Common Metals, 1986, vol. 117, pp. 159-61.10.1016/0022-5088(86)90025-1 ↗
32. 32. P. Ehrlich: Z. Anorg. Chem., 1949, vol. 259, pp. 1-41.10.1002/zaac.19492590102 ↗
33. C. R. Hubbard: Standard X-ray Diffraction Powder Patterns: section 18—Data for 58 Substances, National Bureau of Standards Monogr. 25—Sec. 18, 1981.
34. 34. Y. Lin, R.H. Zee, and B.A. Chin: Metall. Mater. Trans. A, 1991, vol. 22A, pp. 859-65.10.1007/BF02658995 ↗
35. 35. N. Zarrinfar, P.H. Shipway, A.R. Kennedy, and A. Saidi: Scripta Mater., 2002, vol. 46, pp. 121-26.10.1016/S1359-6462(01)01205-2 ↗
36. E.K. Storms: Refractory Materilas: Vol. 2. The Refractory Carbides, Academic Press, New York, NY, 1967, pp. 6–8.
37. 37. L.A. Tret’yachenko and V.N. Eremenko: Sov. Powder Metall. Met. Ceram., 1966, vol. 5, pp. 581-84.10.1007/BF00780122 ↗
38. 38. V.N. Eremenko and T.Y. Velikanova: Sov. Powder Metall. Met. Ceram., 1963, vol. 2, pp. 347-52.10.1007/BF01194667 ↗
39. 39. J.P. Guha and D. Kolar: J. Less-Common Metals, 1973, vol. 31, pp. 337-43.10.1016/0022-5088(73)90027-1 ↗
40. 40. K.J. Kerans, K.S. Mazdiyasni, R. Ruh, and H.A. Lipsitt: J. Am. Ceram. Soc., 1984, vol. 67, pp. 34-38.10.1111/j.1151-2916.1984.tb19143.x ↗
41. 41. P.H. Booker, A.O. Kunrath, and M.T. Hepworth: Acta Mater., 1997, vol. 45, pp. 1625-32.10.1016/S1359-6454(96)00266-2 ↗
42. 42. A. Wittmann, H. Nowotny, and H. Boller: Monatsh. Chem. Verw. Teile Anderer Wiss., 1960, vol. 91, pp. 608-15.10.1007/BF00899796 ↗
43. 43. M. Enomoto: J. Phase Equilib., 1992, vol. 13, pp. 641-44.10.1007/BF02667215 ↗
44. 44. W.A. Zdaniewski: J. Am. Ceram. Soc., 1987, vol. 70, pp. 793-97.10.1111/j.1151-2916.1987.tb05630.x ↗
45. 45. L.J. Huang, L. Geng, and H.X. Peng: Mater. Sci. Eng.: A, 2010, vol. 527, pp. 6723-27.10.1016/j.msea.2010.07.025 ↗
46. 46. M. Guemmaz, A. Mosser, L. Boudoukha, J.J. Grob, D. Raiser, and J.C. Sens: Nucl. Instrum. Methods Phys. Res. Sect. B, 1996, vol. 111, pp. 263-70.10.1016/0168-583X(95)01461-6 ↗
47. 47. S. Hayun, S. Kalabukhov, V. Ezersky, M.P. Dariel, and N. Frage: Ceram. Int., 2010, vol. 36, pp. 451-57.10.1016/j.ceramint.2009.09.004 ↗