journal article·2018-04

Comparative Evaluations and Microstructure: Mechanical Property Relations of Sintered Silicon Carbide Consolidated by Various Techniques

Prasenjit Barick, Arya Chatterjee, Bhaskar Majumdar, Bhaskar Prasad Saha, Rahul Mitra

Publisher page

Abstract

A comparative evaluation between pressureless or self-sintered silicon carbide (SSiC), hot-pressed silicon carbide (HP-SiC), and spark plasma-sintered silicon carbide (SPS-SiC) has been carried out with emphasis on examination of their microstructures and mechanical properties. The effect of sample dimensions on density and properties of SPS-SiC has been also examined. Elastic modulus, flexural strength, and fracture toughness measured by indentation or testing of single-edge notched beam specimens have been found to follow the following trend, HP-SiC > SSiC > SPS-SiC. The SPS-SiC samples have shown size-dependent densification and mechanical properties, with the smaller sample exhibiting superior properties. The mechanical properties of sintered SiC samples appear to be influenced by relative density, grain size, and morphology, as well as the existence of intergranular glassy phase. Studies of fracture surface morphologies have revealed the mechanism of failure to be transgranular in SSiC or HP-SiC, and intergranular in case of SPS-SiC, indicating the dominating influence of grain size and α-SiC formation with high aspect ratio.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (69)

Show source-provided references
1. Hugh O. Pierson : Handbook of Refractory Carbides and Nitrides: Properties, Characteristics, Processing and Applications, 1st ed., Noyes, New Jersey, NJ, 1996, pp. 137-39.10.1016/B978-081551392-6.50009-X ↗
2. J.A. Freitas, Properties of Silicon Carbide, in: G.L. Harris eds., Emis Data Reviews Series no. 13, Inspec, London, 1995, pp. 1–14.
3. P. Mogilevsky, T-II. Mah, T.A. Parthasarathy, and C.M. Crooke : J. Eur. Ceram. Soc., 2006, vol. 89, pp. 633 - 637.10.1111/j.1551-2916.2005.00717.x ↗
4. M. Chhedah, J. Normania and J. Shih: Special Report, Ceramic Defence, 2006, pp. 124–26.
5. J.S. Lee, Y.S. Ahn, J. Am. Ceram. Soc., 2011, 94: 324-27.10.1111/j.1551-2916.2010.04269.x ↗
6. T. Yamamoto, H. Kitaura, Y. Kodera, T. Ishii, M. Ohyanagi and Z.A. Munir : J. Am. Ceram. Soc., 2004, vol. 87, pp. 1436-41.10.1111/j.1551-2916.2004.01436.x ↗
7. C. Lorette, A. Réau and L. Briottet : J. Eur. Ceram. Soc., 2013, vol. 33, pp. 147-156.10.1016/j.jeurceramsoc.2012.07.030 ↗
8. T.M. Lillo, H.S. Chu, D.W. Bailey, W.M. Harrison, D.A. Laughton: 27 th Annual Cocoa Beach Conference on Advanced Ceramics and Composites: A: Ceram. Eng. and Sci. Proc., 2008, vol. 24, (eds. W. M. Kriven and H.-T. Lin), John Wiley & Sons, Inc., NJ, USA.
9. K. Lu : Int. Mater. Rev., 2008, vol. 53, pp. 21-38.10.1179/174328008X254358 ↗
10. S. Dutta: J. Mat. Sci., 1985, 19: 1307-13.10.1007/BF01120042 ↗
11. K.Y. Chila 1994, US Patent 5,298,470.
12. O. Guillon, J. Gonzalez-Julian, B. Dargatz, T. Kessel, G. Schierning, J. Räthel and M. Herrmann : Adv. Eng. Mater., 2014, vol.16, pp. 830-49.10.1002/adem.201300409 ↗
13. Z.A. Munir and D.V. Quach : J.Am. Ceram.Soc., 2011, vol. 94, pp. 1-19.10.1111/j.1551-2916.2010.04210.x ↗
14. ZA Munir, U Anselmi-Tamburini, M Ohyanagi, J. Mat. Sci., 2006, 41: 763-777.10.1007/s10853-006-6555-2 ↗
15. K Vanmeensel, A Laptev, J Hennicke, J Vleugels, O Van der Biest Act. Mater., 2005, 53: 4379-88.10.1016/j.actamat.2005.05.042 ↗
16. J. M. Bind and J.V. Biggers : J. Am. Ceram. Soc., 1975, vol. 58, pp. 304 - 306.10.1111/j.1151-2916.1975.tb11482.x ↗
17. RM German, Sintering theory and practice, Wiley: New York, 1996
18. Mohamed N. Rahaman, Ceramic processing and sintering, 2nd ed., Marcel Dekker, Inc., NY, USA (2003), pp. 679-751.
19. W.J. Clegg : J. Am. Ceram. Soc., 2000, vol. 83, pp. 1039 -1043.10.1111/j.1151-2916.2000.tb01327.x ↗
20. A. Malinge, A.Coupé, Y.L.Petitcorps, and R. Pailler : J. Eur. Ceram. Soc., 2012, vol. 32, pp. 4393 - 4400.10.1016/j.jeurceramsoc.2012.06.008 ↗
21. M.S. Datta, A.K. Bandyopadhyay, and B. Chaudhuri : Bull. Mater. Sci., 2002, vol. 25, pp. 181-89.10.1007/BF02711151 ↗
22. S. Hayun, V.Paris, R.Mitrani, S.Kalabukhov, M.P.Dariel, E.Zaretsky and N.Frage : Ceram. Int., 2012, vol. 38, pp. 6335 - 40.10.1016/j.ceramint.2012.05.003 ↗
23. J. Yi, W.J. Xue, Z. P. Xie, W.Liu, L. X. Cheng, J. Chen, L. Wang, H. Cheng, Y. X. Gao, and H. B. Wang : Mater. Sci. Eng., A, 2013, vol.586, pp. 338-41.10.1016/j.msea.2013.08.033 ↗
24. G Liu, J Li, Y Shan, J Xu Scrip. Mater., 2012, 67: 416-19.10.1016/j.scriptamat.2012.05.037 ↗
25. Y.W. Kim, Y-II. Lee and M. Mitomo : J. Ceram. Soc. Jpn., (2006), Vol.114, pp.681-85.10.2109/jcersj.114.681 ↗
26. P. Barick, B.P. Saha, S.V. Joshi and R. Mitra : J. Eur. Ceram. Soc., 2016, vol. 36, pp. 3863-77.10.1016/j.jeurceramsoc.2016.06.036 ↗
27. T Moritz, A Nagy (2002) J. Nanopar. Res., 4: 439–448.10.1023/A:1021650415563 ↗
28. Y.W. Kim, Y Lee, M.Mitomo, J. Cer. Soc. Jpn., 2006, 114: 681-85.10.2109/jcersj.114.681 ↗
29. W.C. Oliver and G.M. Pharr : J.Mater.Res., 1992, vol. 7, pp. 1564-83.10.1557/JMR.1992.1564 ↗
30. ASTM C1327-15 : ASTM International, West Conshohocken, PA, USA, 2015.
31. ASTM C1421-16: ASTM International, West Conshohocken, PA, USA, 2016.
32. G.R. Anstis, P.Chantikul, P.Lawn, and D.B. Marshall : J.Am.Ceram.Soc., 1981, vol. 64, pp. 533-38.10.1111/j.1151-2916.1981.tb10320.x ↗
33. E. A. Olevsky, C. Garcia-Cardona, W. L. Bradbury, C.D. Haines, D.G. Martin and D. Kapoor : J. Am. Ceram. Soc., 2012, vol. 95, pp. 2414-22.10.1111/j.1551-2916.2012.05096.x ↗
34. U Anselmi-Tamburinia, S Gennarib, JE Garaya, ZA Munir, Mat. Sci. and Eng. A., 2005, 394: 139-48.10.1016/j.msea.2004.11.019 ↗
35. S. Grasso, T. Saunders, H. Porwal, B. Milsom, A. Tudball and M. Reece : J.Am. Ceram. Soc., 2016, Vol. 99, pp. 1534-43.10.1111/jace.14158 ↗
36. L.K. Frevel, D.R. Peterson and C.K. Saha : J. Mater. Sci., 1992, vol. 27, pp.1913-25.10.1007/BF01107220 ↗
37. V.V. Pujar and J.D. Cawley : J. Am. Ceram. Soc., 1995, vol. 78, pp. 774-82.10.1111/j.1151-2916.1995.tb08246.x ↗
38. H. Tanaka, J. Cer. Soc. Jpn., 2011, 119: 218-33.10.2109/jcersj2.119.218 ↗
39. B Matovic, F Zivic, S Mitrovic, D PrSiC, V Maksimovic, T Volkov-Husovic, R Kumar, N Daneu, Mat. Lett., 2016, 164: 268-71.10.1016/j.matlet.2015.09.043 ↗
40. Y. Shinoda, T. Nagano and F.Wakai : J. Am. Ceram. Soc., 1999, vol. 82, pp. 771-73.10.1111/j.1151-2916.1999.tb01833.x ↗
41. A.H. Heuer, G.A. Fryburg, L.U. Ogbuji and T.E. Mitchell : J. Am. Ceram. Soc., 1978, vol. 61, pp. 406-12.10.1111/j.1151-2916.1978.tb09348.x ↗
42. Y. C. Wang, Z. Y. Fu, and W. M. Wang : Key. Eng. Mater., 2003, vol. 249, pp. 471-76.10.4028/www.scientific.net/KEM.249.471 ↗
43. E.V. Aleksandrova, A.M. Ilyina, E.G. Grigoryev and E.A. Olevsky : J. Am. Ceram. Soc., 2015, Vol. 98, pp.3509-517.10.1111/jace.13816 ↗
44. L. U. Ogbuji, T. E. Mitchell and A. H. Heuer : J. Am. Ceram. Soc., 1981, vol. 64, pp. 91 - 99.10.1111/j.1151-2916.1981.tb09583.x ↗
45. NW Jepps, TF Page, 1983 Pro. Crys. Gro. Char., 7: 259-307.10.1016/0146-3535(83)90034-5 ↗
46. High temperature corrosion and materials chemistry proceedings of the Per Kofstad Memorial Symposium: Proc. Electrochem. Soc., ed. by, M. McNallan, E. Opila, T. Maruyama, T. Narita, The Electrochem Society, New Jersey, NJ, 2000, vol. 99–38, pp. 489–502.
47. B2O3-SiO2 phase diagram, Phase equilibria diagrams, vol. 11, Robert S. Roth (eds.), Am. Ceram. Soc. Inc., 1995, p. 112.
48. M. W. Chase : NIST-JANAF Thermochemical Tables, J. Phys. Chem. Ref. Data, 736 Monograph 9, 4th ed., Woodbury, NY: Am. Inst. Phys., 1998.
49. L. Stobierski and A.Gubernat : Ceram. Int., 2003, vol. 29, pp. 287-292.10.1016/S0272-8842(02)00117-7 ↗
50. W.V. Rijswijk and D.J. Shanfield : J.Am.Ceram.Soc., 1990, vol. 73, pp. 148-49.10.1111/j.1151-2916.1990.tb05109.x ↗
51. S. Prochazka: Proc. Intl. Symp. on Densification of Oxide and Non-oxide Ceramics, Hakone, Japan, 1978. ed. by S. Somiya. Gakufutsu Bunken Fukyu-kai, Tokyo, Japan, 1979, pp. 366–80.
52. J. E. Lane, C. H. Carter, Jr. and R. F. Davis: J. Am. Ceram. Soc., 1988, Vol. 71, pp. 281-95.10.1111/j.1151-2916.1988.tb05861.x ↗
53. A. Maître, A.V. Put, J.P. Laval, S.Valette and G.Trolliard : J. Eur. Ceram. Soc., 2008, vol. 28, pp. 1881-90.10.1016/j.jeurceramsoc.2008.01.002 ↗
54. P. Barick, D. Chakravarty, B.P. Saha, R. Mitra and S.V. Joshi : Ceram. Int., 2016, vol. 42, pp. 3836-48.10.1016/j.ceramint.2015.11.048 ↗
55. A Mukherjee, J Bird, J Dorn, Trans. Am. Soc. Metals., 1969, 62: 155-79.
56. G Bernard-Granger, C. Guizard, Act. Mater., 2007, 55: 3493-3504.10.1016/j.actamat.2007.01.048 ↗
57. G. Bernard-Granger, A. Addad, G. Fantozzi, G. Bonnefont, C. Guizard, D. Vernat, Act. Mater., 2010, 58: 3390-99.10.1016/j.actamat.2010.02.013 ↗
58. M. Gendre, A. Maître, and G. Trolliard : Act. Mater., 2010, vol. 58, pp. 2598-2609.10.1016/j.actamat.2009.12.046 ↗
59. M. Lodhe, N. Chawake, Y. Devinder, and M. Balasubramanian: Scrip. Mater., 2016, vol. 115, pp. 137-140.10.1016/j.scriptamat.2016.01.002 ↗
60. F. Thévenot : J. Eur. Ceram. Soc., 1990, vol. 6, pp. 205 - 225.10.1016/0955-2219(90)90048-K ↗
61. JB Watchman, WR Cannon, M.J. Matthewson, Mechanical Properties of Ceramics, Wiley: New York, 1996
62. C Bootjomchai, R Laopaiboon, S Pencharee, J Laopaiboon, J. Non-Cryst. Sol., 2014, 388: 37-45.10.1016/j.jnoncrysol.2014.01.039 ↗
63. MA Meyers, K.K. Chawla, Mechanical behaviour of materials, Cambridge University Press: New York, 2009, pp. 71-159.
64. R. Vassen and D. Stöver : J.Am.Ceram.Soc., 1999, vol. 82, pp. 2585-93.10.1111/j.1151-2916.1999.tb02127.x ↗
65. S.G. Lee and Y.W. Kim : J. Am. Ceram. Soc., 2001, vol. 84, pp. 1347-53.10.1111/j.1151-2916.2001.tb00840.x ↗
66. N.P. Padture and B. R. Lawn : J. Am. Ceram. Soc., 1994, vol. 77, pp. 2518 - 2522.10.1111/j.1151-2916.1994.tb04637.x ↗
67. W.J. MoberlyChan, J.J. Cao, C.J. Gilbert, R.O. Ritchie and L.C. De Jonghe : Ceram. Microstucture, Control at the Atomic Level, Antoni P. Tomsia, Andreas M. Glaeser, eds., 1998, pp. 177-190.10.1007/978-1-4615-5393-9_15 ↗
68. P.L. Swanson, C.J. Fairbanks, B.R. Lawn, Y. - W. Mai and B.J. Hockey : J. Am. Ceram. Soc., 1987, vol. 70, pp. 279-89.10.1111/j.1151-2916.1987.tb04982.x ↗
69. T. Mizrah, M. Hoffman and L. Gauckler, Powd. Metall. Inst., 1984, 16: 217-220.