journal article·2018-06

Effect of Solutes on Grain Refinement of As-Cast Fe-4Si Alloy

Ming Li, Jian-Min Li, Qing Zheng, Geoff Wang, Ming-Xing Zhang

Publisher page

Abstract

Grain size is one of the key microstructural factors that control the mechanical properties of steels. The present work aims to extend the theories of grain refinement which were established for cast light alloys to steel systems. Using a designed Fe-4 wt pct Si alloy (all-ferrite structure during whole solidification process), the solute effect on grain refinement/grain coarsening in ferritic systems was comprehensively investigated. Experimental results showed that boron (B), which is associated with the highest Q value (growth restriction factor) in ferrite, significantly refined the as-cast structure of the Fe-4 wt pct Si alloy. Cu and Mo with low Q values had no effect on grain refinement. However, although Y and Zr have relatively high Q values, addition of these two solutes led to grain coarsening in the Fe-4Si alloy. Understanding the results in regards to the growth restriction factor and the driving force for the solidification led to the conclusion that in addition to the grain growth restriction effect, the changes of thermodynamic driving force for solidification due to the solute addition also played a key role in grain refinement in ferritic alloys. (C) The Minerals, Metals & Materials Society and ASM International 2018.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Aluminum Alloy Microstructure Properties · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. M. Li, J.-M. Li, D. Qiu, Q. Zheng, G.-X. Wang and M.-X. Zhang, Philos. Mag., vol. 46, 2016, pp. 1-23.
2. F. Wang, Z.-L. Liu, D. Qiu, J.A. Taylor, M.A Easton and M.-X. Zhang, Metall. Mater. Trans. A, 2015, vol. 46, pp. 505-15.10.1007/s11661-014-2599-0 ↗
3. M. Kiviö and L.Holappa, Metall. Mater. Trans. B, 2012, vol. 43, pp. 233-40.10.1007/s11663-011-9603-5 ↗
4. M.-L. Wang, G.-G. Cheng, S.-T Qiu, P. Zhao and Y. Gan,, Int. J. Miner. Metall. Mater., 2010, vol. 17, pp. 276-81.10.1007/s12613-010-0305-9 ↗
5. E. El-Kashif, K. Asakura, T. Koseki and K. Shibata, ISIJ int., 2004, vol. 44, pp. 1568-75.10.2355/isijinternational.44.1568 ↗
6. Y. Li, J.A. Wilson, D.N. Crowther, P.S. Mitchell, A.J. Craven and T.N. Baker, ISIJ int., 2004, vol. 44, pp. 1093-102.10.2355/isijinternational.44.1093 ↗
7. H. Tamehiro, M. Murata, R. Habu and M .Nagumo, ISIJ, 1986, vol. 72, pp. 458-65.
8. T. Azuma, K. Miki, Y. Tanaka and T. Ishiguro, ISIJ, 2000, vol. 86, pp. 27-33.
9. M. Sasaki, K. Ohsasa, M. Kudoh and K.Matsuura, ISIJ int., 2008, vol. 48, pp. 340-43.10.2355/isijinternational.48.340 ↗
10. M.A. Easton and D.H. StJohn, Metall. Mater. Trans. A, 1999, vol. 30, pp. 1625-33.10.1007/s11661-999-0099-4 ↗
11. M. Easton and D. StJohn, Metall. Mater. Trans. A, 1999, vol. 30, pp. 1613-23.10.1007/s11661-999-0098-5 ↗
12. D.H. StJohn, M. Qian, M.A. Easton and P. Cao, Acta Mater., 2011, vol. 59, pp. 4907-21.10.1016/j.actamat.2011.04.035 ↗
13. D.H. StJohn, M. Qian, M.A. Easton, P. Cao and Z. Hildebrand, Metall. Mater. Trans. A, 2005, vol. 36, pp. 1669-79.10.1007/s11661-005-0030-6 ↗
14. D. Shu, B.-D. Sun, J. Mi and P.S. Grant, Acta Mater., 2011, vol. 59, pp. 2135-44.10.1016/j.actamat.2010.12.014 ↗
15. Q. Du and Y.-J. Li, Acta Mater., 2014, vol. 71, pp. 380-89.10.1016/j.actamat.2014.03.028 ↗
16. M.A. Easton and D.H. StJohn, Acta Mater., 2001, vol. 49, pp. 1867-78.10.1016/S1359-6454(00)00368-2 ↗
17. M. Johnsson: A Critical Survey of the Grain Refining Mechanisms of Aluminum, Stockholm University, Stockholm, 1993.
18. M. A. Easton and D. H. Stohn, Mater. Sci. Eng. A, 2008, vol. 486, pp. 8-13.10.1016/j.msea.2007.11.009 ↗
19. D.H. StJohn, M.A. Easton, P. Cao and M. Qian, Int. J. Cast Met. Res., 2007, vol. 20, pp. 131-35.10.1179/136404607X240562 ↗
20. A. Prasad, L. Yuan, P.D. Lee and D.H. StJohn, Acta Mater., 2013, vol. 61, pp. 5914-27.10.1016/j.actamat.2013.06.015 ↗
21. M. Qian, P. Cao, M.A. Easton, S. D. McDonald and D. H. StJohn, Acta Mater., 2010, vol. 58, pp. 3262-70.10.1016/j.actamat.2010.01.052 ↗
22. M. Easton and D. H. StJohn, Metall. Mater. Trans. A, 2005, vol. 36, pp. 1911-20.10.1007/s11661-005-0054-y ↗
23. F. Wang, Z.-L. Liu, D. Qiu, J.A. Taylor, M.A. Easton and M.-X. Zhang, Acta Mater. 2013, vol. 61, pp. 360-70.10.1016/j.actamat.2012.09.075 ↗
24. M.J. Bermingham: PhD Thesis, The University of Queensland, Brisbane, 2009.
25. M.J. Bermingham, S.D. McDonald, M.S. Dargusch and D.H. StJohn, Scr. Mater., 2008, vol. 58, pp. 1050-53.10.1016/j.scriptamat.2008.01.041 ↗
26. M.J. Bermingham, S.D. McDonald, M.S. Dargusch and D.H. StJohn, J. Mater. Res., 2008, vol. 23, pp. 97-104.10.1557/JMR.2008.0002 ↗
27. M. Palumbo, G. Cacciamani, E. Bosco and M. Baricco, Intermetallics 2003, vol. 11, pp. 1293-99.10.1016/S0966-9795(03)00171-7 ↗
28. M.A. Van Ende and I. H. Jung, J. Alloys Compd., 2013, vol. 548, pp. 133-54.10.1016/j.jallcom.2012.08.127 ↗
29. M. Lindholm, J. Phase Equilib., 1997, vol. 18, pp. 432-40.10.1007/BF02647699 ↗
30. J J. Campbell: Complete casting handbook: metal casting processes, metallurgy, techniques and design, Butterworth-Heinemann, Oxford, 2015.
31. A.M. Mitrašinović and F.C. Hernández, Mater. Sci. Eng. A, 2012, vol. 540, pp. 63-69.10.1016/j.msea.2012.01.072 ↗
32. T.E. Quested, A.T. Dinsdale and A.L. Greer, Acta Mater., 2005, vol. 53, pp. 1323-34.10.1016/j.actamat.2004.11.024 ↗
33. R. Schmid-Fetzer and A. Kozlov, Acta Mater., 2011, vol. 59, pp. 6133-44.10.1016/j.actamat.2011.06.026 ↗
34. H. Fredriksson and U. Åkerlind: Solidification and Crystallization Processing in Metals and Alloys, Wiley, Somerset, 2012, pp 166-200.10.1002/9781119975540.ch4 ↗
35. G.E. Rustan: PhD thesis, Iowa State University, 2014.
36. B. Sundman and J. Ågren, J. Phys. Chem. Solids., 1981, vol. 42, pp. 297-301.10.1016/0022-3697(81)90144-X ↗
37. A.T. Dinsdale, Calphad, 1991, vol. 15, pp. 317-425.10.1016/0364-5916(91)90030-N ↗
38. T. Tokunaga, H. Ohtani and M. Hasebe, Calphad, 2004, vol. 28, pp. 354-62.10.1016/j.calphad.2004.11.004 ↗
39. H. Fredriksson and U. Åkerlind: Solidification and Crystallization Processing in Metals and Alloys, Wiley, Chichester, 2012, pp 42-98.10.1002/9781119975540.ch2 ↗
40. L.-K. Liang, Y.-C. Che, H. Huai and X. -W. Li: Thermodynamics and kinetics of metallurgy. Northeast Institute of Technology Press, Shenyang, 1990.
41. M. Hno and K. Ito: Thermodynamic data for steel making. Tohoku University Press, Sendai, 2010.
42. T. Van Rompaey, K.C. Hari Kumar and P. Wollants, J. Alloys Compd., 2002, vol. 334, pp. 173-81.10.1016/S0925-8388(01)01777-7 ↗
43. B. Hallemans, P. Wollants and J.R. Roos, J. Phase Equilib., 1995, vol. 16, pp. 137-49.10.1007/BF02664851 ↗
44. O. Redlich and A.T. Kister, Ind. Eng. Chem., 1948, vol. 40, pp. 345-48.10.1021/ie50458a036 ↗
45. Y. Hayashi and T. Sugeno, J. Phys. Soc. Jpn., 1964, vol. 19, pp. 1251-51.10.1143/JPSJ.19.1251 ↗
46. M. Yukinobu, O. Ogawa and S. Goto, Metall. Trans. B, 1989, vol. 20, pp. 705-10.10.1007/BF02655928 ↗
47. A. Brown, J.D. Garnish and R.W. Honeycombe, Met. Sci., 1974, vol. 8, pp. 317-24.10.1179/msc.1974.8.1.317 ↗
48. M. Hillert and M. Jarl, Calphad, 1978, vol. 2, pp. 227-38.10.1016/0364-5916(78)90011-1 ↗
49. F. Wang, Z.-L. Liu, D. Qiu, J.A. Taylor, M.A. Easton and M.-X. Zhang, J. Appl. Crystallogr. 2014, vol. 47, pp. 770-79.10.1107/S1600576714004476 ↗
50. F. Wang, Z.-L. Liu, D. Qiu, J.A. Taylor, M.A. Easton and M.-X. Zhang, Acta Mater. 2013, vol. 61, pp. 5636-45.10.1016/j.actamat.2013.05.044 ↗
51. Z.-L. Liu, D. Qiu, F. Wang, A. Taylor, M.A. Easton and M.-X. Zhang, J. Appl. Crystallogr. 2015, vol. 48, pp. 890-900.10.1107/S1600576715008936 ↗
52. Z.-L. Liu, D. Qiu, F. Wang, A. Taylor, M.A. Easton and M.-X. Zhang, Acta Mater. 2014, vol. 79, pp. 315-26.10.1016/j.actamat.2014.07.026 ↗
53. L.K. Lamikhov and G. Samsonov, Tsvetn. Met., vol. 8, 1964, pp. 77-81.
54. D. Qiu, J.A. Taylor, M.-X. Zhang and P.M. Kelly, Acta Mater. 2007, vol. 55, pp. 1447-56.10.1016/j.actamat.2006.09.046 ↗
55. Z.I. Morita and T. Tanaka, Transactions ISIJ 1983, vol. 23, p.10.10.2355/isijinternational1966.23.824 ↗
56. J. Miettinen, Calphad, 1998, vol. 22, pp. 231-56.10.1016/S0364-5916(98)00026-1 ↗
57. C.E. Campbell and U.R. Kattner, J. Phase Equilib., 1999, vol. 20, pp. 485-96.10.1361/105497199770340743 ↗
58. H.-M. Chen, H.-Y. Qi, F. Zheng, L.-B. Liu and Z.-P. Jin, J. Alloys Compd., 2009, vol. 481, pp. 182-89.10.1016/j.jallcom.2009.03.044 ↗
59. S. Kardellass, C. Servant, N. Selhaoui, A. Iddaoudi, M.A. Amari, and L. Bouirden: MATEC Web of Conferences, 2013, pp 81–86.
60. T. Tokunaga, K. Terashima, H. Ohtani and M. Hasebe, Mater. Trans., 2008, vol. 49, pp. 2534-40.10.2320/matertrans.MB200809 ↗
61. Q. Chen and Z.-P. Jin, Metall. Mater. Trans. A, 1995, vol. 26, pp. 417-26.10.1007/BF02664678 ↗
62. J. Miettinen, CALPHAD, 2003, vol. 27, pp. 389-94.10.1016/j.calphad.2004.01.003 ↗
63. Å. Jansson: TRITA-MAC-0340. Materials Research Bulletin, The Royal Institute of Technology, Stockholm, pp. 1-10 (1987).
64. X. Yan and Y.-A. Chang, J. Alloys Compd., 2000, vol. 308, pp. 221-29.10.1016/S0925-8388(00)00983-X ↗
65. A.F. Guillermet, CALPHAD, 1982, vol. 6, pp. 127-40.10.1016/0364-5916(82)90008-6 ↗
66. Y. Liu, G. Shao and P. Tsakiropoulos, Intermetallics 2000, vol. 8, pp. 953-62.10.1016/S0966-9795(00)00068-6 ↗