Deformation Mechanism and Recrystallization Relationships in Galfenol Single Crystals: On the Origin of Goss and Cube Orientations
Source abstract
Abstract
In this work, deformation mechanism related to recrystallization behavior in single-crystal disks of Galfenol (Fe-Ga alloy) was investigated to gain insights into the influence of crystal orientations on structural changes and selective grain growth that take place during secondary recrystallization. We started with the three kinds of single-crystal samples with (011)[100], (001)[100], and (001)[110] orientations, which were rolled and annealed to promote the formation of different grain structures and texture evolutions. The initial Goss-oriented (011)[100] crystal mostly rotated into {111}〈112〉 orientations with twofold symmetry and shear band structures by twinning resulted in the exposure of rolled surface along {001}〈110〉 orientation during rolling. In contrast, the Cube-oriented (001)[100] single crystal had no change in texture during rolling with the thickness reduction up to 50 pct. The {123}〈111〉 slip systems were preferentially activated in these single crystals during deformation as well as {112}〈111〉 slip systems that are known to play a role in primary slip of body-centered cubic (BCC) materials such as α-iron and Fe-Si alloys. After annealing, the deformed Cube-oriented single crystal had a small fraction (<10 pct) of recrystallized Goss-oriented grains. The weak Goss component remained in the shear bands of the 50 pct rolled Goss-oriented single crystal, and it appeared to be associated with coalescence of subgrains inside shear band structures during primary recrystallization. Rolling of the (001)[110] single crystal led to the formation of a tilted (001)[100] component close to the 〈120〉 orientation, associated with {123}〈111〉 slip systems as well. This was expected to provide potential sites of nucleation for secondary recrystallization; however, no Goss- and Cube-oriented components actually developed in this sample during secondary recrystallization. Those results illustrated how the recrystallization behavior can be influenced by deformed structure and the slip systems.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnetic Properties and Applications · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. R.A. Kellogg, A.B. Flatau, A.E. Clark, M. Wun-Fogle, and T.A. Lograsso: J. Appl. Phys., 2003, vol. 93, pp. 8495-8497.10.1063/1.1540062 ↗
2. S.M. Na, J.H. Yoo, and A.B. Flatau: IEEE Trans. Magn., 2009, vol. 45, pp. 4132-4135.10.1109/TMAG.2009.2021398 ↗
3. J.H. Li, X.X. Gao, J. Zhu, X.Q. Bao, T. Xia, and M.C. Zhang: Scripta Mater., 2010, vol. 63, pp. 246–249.10.1016/j.scriptamat.2010.03.068 ↗
4. S.M. Na and A.B. Flatau: Scripta Mater., 2012, vol. 66, pp. 307-310.10.1016/j.scriptamat.2011.11.020 ↗
5. S.M. Na and A.B. Flatau: J. Appl. Phys., 2007, vol. 101, p. 09N518.10.1063/1.2712822 ↗
6. S.M. Na and A.B. Flatau: Smart Mater. Struct., 2013, vol. 22, pp. 125026.10.1088/0964-1726/22/12/125026 ↗
7. A. Sakakura: J. Appl. Phys., 1969, vol. 40, pp. 1534-1538.10.1063/1.1657751 ↗
8. P. Lin, G. Palumbo, J. Harase, and K.T. Aust: Acta Mater., 1996, vol. 44, pp. 4677-4683.10.1016/S1359-6454(96)00140-1 ↗
9. D.J. Köhler: J. Appl. Phys., 1960, vol. 31, pp. 408S-409S.10.1063/1.1984767 ↗
10. J.J. Kramer: Metall. Mater. Trans. A, 1992, vol. 23, pp. 1987-1998.10.1007/BF02647546 ↗
11. Y. Hayakawa: Sci. Technol. Adv. Mater., 2017, vol. 18, pp. 480-497.10.1080/14686996.2017.1341277 ↗
12. I. Samajdar, S. Cicale, B. Verlinden, P. Van Houtte, and G. Abbruzzesse: Scripta Mater., 1998, vol. 39, pp. 1083-1088.10.1016/S1359-6462(98)00288-7 ↗
13. D. Dorner, S. Zaefferer, L. Lahn, and D. Raabe: J. Magn. Magn. Mater., 2006, vol. 304, pp. 183-186.10.1016/j.jmmm.2006.02.116 ↗
14. D. Dorner, S. Zaefferer, and D. Raabe: Acta Mater., 2007, vol. 55, pp. 2519-2530.10.1016/j.actamat.2006.11.048 ↗
15. C.G. Dunn: Acta Metall., 1954, vol. 2, pp. 173-183.10.1016/0001-6160(54)90156-X ↗
16. G.M. Rusakov, M.L. Lobanov, A.A. Redikultsev, and I.V. Kagan: Metall. Mater. Trans. A, 2011, vol. 2A, pp. 1435-1438.10.1007/s11661-011-0684-1 ↗
17. J.P. Hirth and J. Lothe: Theory of Dislocations, 2nd ed., Krieger Publishing Company, Malabar, 1982, p. 275.
18. W.R. Hibbard and W.R. Tully: Trans. Metall. Soc. AIME, 1961, vol. 221, pp. 336-343.
19. B.D. Cullity: Introduction of Magnetic Materials, Reading, MA: Addison-Westly, 1972.
20. J.B. Restorff, M. Wun-Fogle, K.B. Hathaway, A.E. Clark, T.A. Lograsso, and G. Petculescu: J. Appl. Phys., 2012, vol. 111, p. 023905.10.1063/1.3674318 ↗
21. H. Abe, M. Matsuo, and K. Ito: Trans. JIM, 1963, vol. 4, pp. 28-32.10.2320/matertrans1960.4.28 ↗
22. P.K. Koh and C. G. Dunn: Trans. Met. Soc. AIME, 1955, vol. 203, pp. 401-406
23. H. Hu: in Recovery and Recrystallization of Meals, L. Himmel, ed., Interscience Publ., New York, 1962, pp. 311–78.
24. T. Taoka, E. Furubayashi, and S. Takeuchi: Trans. ISIJ, 1966, vol. 6, pp. 290-316.10.2355/isijinternational1966.6.290 ↗
25. T. Taoka, E. Furubayashi, and S. Takeuchi: Trans. ISIJ, 1967, vol. 2, pp. 95-113.10.2355/isijinternational1966.7.95 ↗
26. T. Toge, M. Muraki, and M. Komatsubara: Mater. Sci. Forum, 1998, vol. 38, pp. 524-530.
27. T. Toge, M. Muraki, M. Komatsubara, and T. Obara: ISIJ International, 2002, vol. 408-412, pp. 1311-1316.
28. J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, Second edn. Elsevier, Oxford, 2002.
29. A. Samet-Mezios, A.L. Etter, T. Baudin, and R. Penelle: Mater. Sci. Eng. A, 2008, vol. 473, pp. 342-354.10.1016/j.msea.2007.03.090 ↗
30. B. Zhou: Acta Metall. Sinica (english ed.), 1991, vol. 4, pp. 103-107.
31. T. Kumano, T. Haratani, and Y. Ushigami: ISIJ International, 2003, vol. 43, pp. 736-745.10.2355/isijinternational.43.736 ↗
32. S.M. Na and A.B. Flatau: Smart Mater. Struct., 2012, vol. 21, p. 055024.10.1088/0964-1726/21/5/055024 ↗
33. J.H. Li, X.X. Gao, J. Zhu, C. He, J. Qiao, and M. Zhang: J. Alloys Comp., 2009, vol. 476, pp. 529-533.10.1016/j.jallcom.2008.09.087 ↗
34. S. Taguchi and A. Sakakura: Acta Metall., 1966, vol. 14, pp. 405.10.1016/0001-6160(66)90099-X ↗
35. C.G. Dunn and P.K. Koh: Trans. AIME, 1956, vol. 206, pp. 1017-1024.