Study of Solidification Cracking in a Transformation-Induced Plasticity-Aided Steel
Source abstract
Abstract
Abstract In situ high-temperature laser scanning confocal microscopy is applied to study solidification cracking in a TRIP steel. Solidification cracking was observed in the interdendritic region during the last stage of solidification. Atom probe tomography revealed notable enrichment of phosphorus in the last remaining liquid. Phase field simulations also confirm phosphorus enrichment leading to severe undercooling of more than 160 K in the interdendritic region. In the presence of tensile stress, an opening at the interdendritic region is difficult to fill with the remaining liquid due to low permeability and high viscosity, resulting in solidification cracking.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgical Processes and Thermodynamics · Advanced Materials Characterization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. T. Senuma: ISIJ Int., 2001, vol. 41 (6), pp. 520–532.10.2355/isijinternational.41.520 ↗
2. O. Matsumura, Y. Sakuma, and H. Takechi: Trans. ISIJ, 1987a, vol. 27a(7), pp. 570–79.10.2355/isijinternational1966.27.570 ↗
3. O. Matsumura, Y. Sakuma, and H. Takechi: Scr. Metall., 1987b, vol. 21b(10), pp. 1301–06.10.1016/0036-9748(87)90103-7 ↗
4. J. Mahieu, J. Maki, B. De Cooman, and S. Claessens: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2573–2580.10.1007/s11661-002-0378-9 ↗
5. E. Jimenez-Melero, N. van Dijk, L. Zhao, J. Sietsma, S. Offerman, J. Wright, and S. van der Zwaag: Acta Mater., 2009, vol. 57 (2), pp. 533 – 543.10.1016/j.actamat.2008.09.040 ↗
6. H. C. Chen, H. Era, and M. Shimizu: Metall. Trans. A, 1989, vol. 20A, pp. 437–445.10.1007/BF02653923 ↗
7. B. D. Cooman: Curr. Opin. Solid State Mater. Sci., 2004, vol. 8 (3), pp. 285 – 303.10.1016/j.cossms.2004.10.002 ↗
8. H. K. D. H. Bhadeshia, and D.-W. Suh: Ironmak. Steelmak., 2015, vol. 42 (4), pp. 259–267.10.1179/1743281214Y.0000000261 ↗
9. J. Wang and S. V. D. Zwaag: Z. Metallkd., 2001, vol. 92(12), pp. 1299–1305.
10. J. Lippold: Welding Metallurgy and Weldability, 1st ed., Wiley, New York, 2014, pp. 1–400.10.1002/9781118960332 ↗
11. W. Mirihanage, M. D. Michiel, A. Reiten, L. Arnberg, H. Dong, and R. Mathiesen: Acta Mater., 2014, vol. 68, pp. 159 – 168.10.1016/j.actamat.2014.01.040 ↗
12. M. Rappaz and J. Dantzig: Solidification, 1st ed., EFPL Press, Lausanne, 2009, pp. 538–42.
13. L. Aucott, D. Huang, H. Dong, S. Wen, J. Marsden, A. Rack, and A. Cocks: Sci. Rep., 2017, vol. 7: 40255.10.1038/srep40255 ↗
14. S. Kou: Acta Mater., 2015, vol. 88, pp. 366–374.10.1016/j.actamat.2015.01.034 ↗
15. M. Rappaz, J. M. Drezet, and M. Gremaud: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 449–455.10.1007/s11661-999-0334-z ↗
16. W. S. Pellini: Foundry, 1952, vol. 80, pp. 124–133.
17. N. N. Prokhorov: Svar Proiz, 1956, vol. 6, pp. 5–11.
18. I. Medovar: Avtomatich. Svarka, 1954, vol. 7, pp. 12–28.
19. U. Feurer: Proceedings of the International Symposium on Engineering Alloys, Delft, pp. 131–145.
20. T. Kannengießer and T. Böllinghaus: Weld. World, 2014, vol. 58 (3), pp. 397–421.10.1007/s40194-014-0126-y ↗
21. S. Griesser, C. Bernhard, and R. Dippenaar: Acta Mater., 2014, vol. 81, pp. 111–120.10.1016/j.actamat.2014.08.020 ↗
22. H. Shibata, Y. Arai, M. Suzuki, and T. Emi: Metall. Mater. Trans. B, 2000, vol. 31B, pp. 981–991.10.1007/s11663-000-0074-3 ↗
23. M. Reid, D. Phelan, and R. Dippenaar: ISIJ Int., 2004, vol. 44 (3), pp. 565–572.10.2355/isijinternational.44.565 ↗
24. Y.-S. Chen, D. Haley, S. S. A. Gerstl, A. J. London, F. Sweeney, R. A. Wepf, W. M. Rainforth, P. A. J. Bagot, and M. P. Moody: Science, 2017, vol. 355 (6330), pp. 1196–1199.10.1126/science.aal2418 ↗
25. S. Griesser, and R. Dippenaar: ISIJ Int., 2014, vol. 54 (3), pp. 533–535.10.2355/isijinternational.54.533 ↗
26. V. Shankar, T. P. S. Gill, S. L. Mannan, and S. Sundaresan: Sadhana, 2003, vol. 28 (3), pp. 359–382.10.1007/BF02706438 ↗
27. N. Bailey: Weldability of Ferritic Steels, 1st ed., Woodhead Publishing, Sawston, 1994, pp. 69–70.10.1533/9781845698935.1 ↗
28. https://www.micress.de.
29. I. Steinbach and F. Pezzolla: Physica D, 1999, vol. 134 (4), pp. 385–393.10.1016/S0167-2789(99)00129-3 ↗
30. M. Amirthalingam, E. M. van der Aa, C. Kwakernaak, M. J. M. Hermans, and I. M. Richardson: Weld. World, 2015, vol. 59 (5), pp. 743–755.10.1007/s40194-015-0250-3 ↗
31. W.-Y. Wang, B. Liu, and V. Kodur: J. Mater. Civ. Eng., 2013, vol. 25 (2), pp. 174–182.10.1061/(ASCE)MT.1943-5533.0000600 ↗
32. N. Coniglio and C. Cross: Metall. Mater. Trans. A, 2009, vol. 40, pp. 2718–28.10.1007/s11661-009-9964-4 ↗
33. C. Bordreuil and A. Niel: Comput. Mater. Sci., 2014, vol. 82 (Supplement C), pp. 442–50.10.1016/j.commatsci.2013.09.067 ↗
34. S. Kou: Weld. J., 2015, vol. 94 (12), pp. 374s–388s.
35. K. Kubo and R. D. Pehlke: Metall. Trans. B, 1985, vol. 16B, pp. 359–366.10.1007/BF02679728 ↗
36. D. R. Poirier: Metall. Trans. B, 1987, vol. 18B, pp. 245–255.10.1007/BF02658450 ↗
37. Z. Evenson, S. Raedersdorf, I. Gallino, and R. Busch: Scripta Mater., 2010, vol. 63 (6), pp. 573 – 576.10.1016/j.scriptamat.2010.06.008 ↗
38. R. N. Singh and F. Sommer: Mon. Chem., 2012, vol. 143 (9), pp. 1235–1242.10.1007/s00706-012-0728-2 ↗
39. R. Wu, A. J. Freeman, and G. B. Olson: Science, 1994, vol. 265 (5170), pp. 376–380.10.1126/science.265.5170.376 ↗
40. F. Christien, R. L. Gall, and G. Saindrenan: Scripta Mater., 2003, vol. 48 (1), pp. 11 – 16.10.1016/S1359-6462(02)00309-3 ↗
41. C. Naudin, J. Frund, and A. Pineau: Scripta Mater., 1999, vol. 40 (9), pp. 1013 – 1019.10.1016/S1359-6462(99)00069-X ↗