journal article·2018-01

A Coupled Crystal Plasticity and Anisotropic Yield Function Model to Identify the Anisotropic Plastic Properties and Friction Behavior of an AA 3003 Alloy

Hyuk Jong Bong, Dohyun Leem, Jinwoo Lee, Jinjin Ha, Myoung-Gyu Lee

Publisher page

Abstract

A multi-scale simulation of the tip test, developed to determine the tribological characteristics of the back-extrusion process, was conducted on an AA 3003 alloy. A microstructure-level simulation, coupled with crystal plasticity finite element (CPFE) analysis, was utilized to characterize the macro-mechanical properties of the AA 3003. Owing to the limited size of the material provided, we performed CPFE analyses rather than multiple mechanical tests to determine the plastic anisotropy characteristics of the AA 3003 alloy. A three-dimensional finite element (FE) model of the tip test was developed using two different yield functions, namely the generalized von Mises yield function and Hill’s (1948) yield function, with material parameters identified from the CPFE analyses. The results revealed the following: 1. The directionality observed during the tip test is governed by the plastic anisotropy, rather than the frictional conditions. 2. The plastic anisotropy results in different Coulomb friction values. Therefore, the anisotropy should be carefully addressed in the tip test.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (73)

Show source-provided references
1. H. Kudo: Int. J. Mech. Sci. 1960, vol. 2, pp. 102-27.10.1016/0020-7403(60)90016-3 ↗
2. J. B. Hawkyard and W. Johnson: Int. J. Mech. Sci., 1967, vol. 9, pp. 163-82.10.1016/0020-7403(67)90027-6 ↗
3. T. Robinson, H. Ou, and C. G. Armstrong: J. Mater. Process. Technol., 2004, vol. 153–154, pp. 54-59.10.1016/j.jmatprotec.2004.04.045 ↗
4. S. J. Mirahmadi, M. Hamedi, and M. Cheraghzadeh: Tribol. Trans., 2015, vol. 58, pp. 778-85.10.1080/10402004.2015.1019598 ↗
5. M. Dehghan, F. Qods, M. Gerdooei, and J. Doai: Appl. Mech. Mater., 2012, vol. 249–250, pp. 663-66.10.4028/www.scientific.net/AMM.249-250.663 ↗
6. Y. T. Im, O. Vardan, G. Shen, and T. Altan: CIRP Ann. - Manuf. Technol., 1988, vol. 37, 225-30.10.1016/S0007-8506(07)61623-0 ↗
7. T. Nakamura, N. Bay, and Z.-L. Zhang: J. Tribol., 1997, vol. 119, pp. 501-06.10.1115/1.2833526 ↗
8. T. Nakamura, N. Bay, and Z.-L. Zhang: J. Tribol., 1998, vol. 120, pp. 716-23.10.1115/1.2833770 ↗
9. A. Buschhausen, K. Weinmann, J. Y. Lee, and T. Altan: J. Mater. Process. Technol., 1992, vol. 33, pp. 95-108.10.1016/0924-0136(92)90313-H ↗
10. T. Nishimura, T. Sato, and Y. Tada, J: Mater. Process. Technol., 1995, vol. 53, pp. 726-35.10.1016/0924-0136(94)01759-T ↗
11. Y.-T. Im, J.-S. Cheon, and S.-H. Kang: J. Manuf. Sci. Eng., 2002, vol. 124, pp. 409-15.10.1115/1.1445151 ↗
12. P. Chauviere, K. H. Jung, D. K. Kim, H. C. Lee, S. H. Kang, and Y. T. Im: J. Mech. Sci. Technol., 2008, vol. 22, pp. 924-30.10.1007/s12206-008-0211-5 ↗
13. Y.-T. Im, S.-H. Kang, and J.-S. Cheon: J. Manuf. Sci. Eng., 2003, vol. 125, pp. 378-83.10.1115/1.1559165 ↗
14. S.-H. Kang, J.-H. Lee, J.-S. Cheon, and Y.-T. Im: Int. J. Mech. Sci., 2004, vol. 46, pp. 855-69.10.1016/j.ijmecsci.2004.06.002 ↗
15. H. J. Bong, D. Leem, J. H. Kim, Y. T. Im: and M. G. Lee, Met. Mater. Int. 2016, vol. 22, pp. 356-63.10.1007/s12540-015-5158-3 ↗
16. K. H. Jung, H. C. Lee, D. K. Kim, S. H. Kang, and Y. T. Im: Wear, 2012, vol. 286–287, pp. 19-26.10.1016/j.wear.2011.05.031 ↗
17. K.-H. Jung, H.-C. Lee, J. S. Ajiboye, S.-H. Kang, and Y.-T. Im: J. Tribol., 2009, vol. 132, pp. 11601.10.1115/1.4000273 ↗
18. K. H. Jung, H. C. Lee, J. S. Ajiboye, and Y. T. Im: Tribol. Lett., 2009, vol. 37, 353-59.10.1007/s11249-009-9529-0 ↗
19. F. Barlat and H. Bong: in 60 Excell. Invent. Met. Form. SE - 7, A.E. Tekkaya, W. Homberg, and A. Brosius, eds., Springer, Berlin, 2015, pp. 43–48.
20. H. J. Bong, F. Barlat, D. C. Ahn, H.-Y. Kim: and M.-G. Lee, Int. J. Mech. Sci., 2013, vol. 75, 94-109.10.1016/j.ijmecsci.2013.05.017 ↗
21. H. J. Bong, F. Barlat, M.-G. Lee, and D. C. Ahn: Int. J. Mech. Sci., 2012, vol. 64, 1-10.10.1016/j.ijmecsci.2012.08.009 ↗
22. M. G. Lee, J. W. Lee, J. J. Gracio, G. Vincze, E. F. Rauch, and F. Barlat: Comput. Mater. Sci., 2013, vol. 79, 570-83.10.1016/j.commatsci.2013.05.056 ↗
23. M. Liu, K.A. Tieu, K. Zhou, C.-T. Peng: Metall. Mater. Trans. A. 2016, vol. 47 pp. 2717–25.10.1007/s11661-016-3439-1 ↗
24. J.-H. Jung, Y.-S. Na, K.-M. Cho, D.M. Dimiduk, Y.S. Choi: Metall. Mater. Trans. A, 2015, vol. 46, 4834–40.10.1007/s11661-015-3092-0 ↗
25. S. F. Choudhury, L. Ladani: Metall. Mater. Trans. A, 2014, vol. 46A, pp. 1108-18.
26. K. Zhang and B. Holmedal and O. S. Hopperstad and S. Dumoulin: Model. Simul. Mater. Sci. Eng., 2014, vol. 22, pp. 75015.10.1088/0965-0393/22/7/075015 ↗
27. R. K. Verma, P. Biswas, T. Kuwabara, and K. Chung: Mater. Sci. Eng. A, 2014, vol. 604, pp. 98-102.10.1016/j.msea.2014.03.002 ↗
28. K. Inal, R. K. Mishra, and O. Cazacu: Int. J. Solids Struct., 2010, vol. 47, pp. 2223-33.10.1016/j.ijsolstr.2010.04.017 ↗
29. H. Lim, R. Dingreville, L. A. Deibler, T. E. Buchheit, and C. C. Battaile: Comput. Mater. Sci. 2016, vol. 117, pp. 437-44.10.1016/j.commatsci.2016.02.022 ↗
30. B. Klusemann, B. Svendsen, and H. Vehoff: Comput. Mater. Sci., 2012, vol. 52, pp. 25-32.10.1016/j.commatsci.2011.03.042 ↗
31. M. Knezevic and S. R. Kalidindi: Comput. Mater. Sci., 2007, vol. 39, pp. 643-48.10.1016/j.commatsci.2006.08.025 ↗
32. H. Lim, J. D. Carroll, C. C. Battaile, T. E. Buchheit, B. L. Boyce, and C. R. Weinberger: Int. J. Plast., 2014, vol. 60, pp. 1-18.10.1016/j.ijplas.2014.05.004 ↗
33. F. Meier, C. Schwarz, and E. Werner: Comput. Mater. Sci., 2014, vol. 94, pp. 122-31.10.1016/j.commatsci.2014.03.020 ↗
34. J. Jung, J. I. Yoon, J. H. Moon, H. K. Park, and H. S. Kim: Comput. Mater. Sci., 2017, vol. 126, pp. 121-31.10.1016/j.commatsci.2016.09.017 ↗
35. A. Khajezade, M.H. Parsa, H. Mirzadeh: Metall. Mater. Trans. A, 2016, vol. 47 pp. 941–48.10.1007/s11661-015-3227-3 ↗
36. M.I. Latypov, M.-G. Lee, Y. Beygelzimer, D. Prilepo, Y. Gusar, H.S. Kim: Metall. Mater. Trans. A, 2016, vol. 47, 1248–6010.1007/s11661-015-3298-1 ↗
37. Y.S. Choi, M.A. Groeber, P.A. Shade, T.J. Turner, J.C. Schuren, D.M. Dimiduk, M.D. Uchic, A.D. Rollett: Metall. Mater. Trans. A, 2014, vol. 45, pp. 6352–59.10.1007/s11661-014-2556-y ↗
38. F. Barlat and O. Richmond: Mater. Sci. Eng., 1987, vol. 95, 15-29.10.1016/0025-5416(87)90494-0 ↗
39. M. Kuroda: in AIP Conf. Proc., 2005, vol. 778, pp. 445–50.10.1063/1.2011260 ↗
40. F. Khakbaz and M. Kazeminezhad: Mater. Sci. Eng. A, 2012, vol. 532, pp. 26-30.10.1016/j.msea.2011.10.057 ↗
41. R. Fournier and S. Fournier: Sheet Metal Handbook, HP Books, 1989, p. 143.
42. S. Lim, H. Huh: Int. J. Automot. Technol. 2017, vol. 18, pp. 719-27.10.1007/s12239-017-0071-z ↗
43. J. H. Sung, J. H. Kim, and R. H. Wagoner: Int. J. Plast., 2010, vol. 26, pp. 1746-71.10.1016/j.ijplas.2010.02.005 ↗
44. A. Smith, Z. Chen, J. J. Y. Lee, M. G. Lee, and R. Wagoner, Int. J. Plast. 2014, vol. 58, pp. 100-1910.1016/j.ijplas.2014.01.005 ↗
45. W.F. Hosford and R.M. Caddel: Metal Forming: Mechanics and Metallurgy, Cambridge University Press, 1983.
46. R. Hielscher and H. Schaeben: J. Appl. Crystallogr., 2008, vol. 41, pp. 1024-37.10.1107/S0021889808030112 ↗
47. H. Huh, C.G. Park, C.S. Lee, and Y.T. Keum: in Proc. 9th AEPA 2008 (World Scientific, Daejeon, Korea, 2009), pp. 527–28.
48. S. Akramove, M. G. Lee, I. Kim, D. Y. Sung, B. H. Park, and I. Kim, Mater. Sci. Forum, 2005, vol. 495–497, pp. 803-8.10.4028/www.scientific.net/MSF.495-497.803 ↗
49. R. J. Asaro and J. R. Rice: J. Mech. Phys. Solids, 1977, vol. 25, pp. 309-38.10.1016/0022-5096(77)90001-1 ↗
50. E. H. Lee: J. Appl. Mech., 1969, vol. 36, pp. 1-6.10.1115/1.3564580 ↗
51. R. Hill and J. R. Rice: J. Mech. Phys. Solids, 1972, vol. 20, pp. 401-13.10.1016/0022-5096(72)90017-8 ↗
52. D. Peirce, R. J. Asaro, and A. Needleman: Acta Metall., 1982, vol. 30, pp. 1087-1119.10.1016/0001-6160(82)90005-0 ↗
53. M. G. Lee, H. Lim, B. L. Adams, J. P. Hirth, and R. H. Wagoner: Int. J. Plast., 2010, vol. 26, pp. 925-38.10.1016/j.ijplas.2009.11.004 ↗
54. J. R. Rice: J. Mech. Phys. Solids, 1971, vol. 19, pp. 433-55.10.1016/0022-5096(71)90010-X ↗
55. J.W. Hutchinson: in Proc. R. Soc. Lond., 1976 vol. A 348, pp. 101–27.10.1098/rspa.1976.0027 ↗
56. C. A. Bronkhorst, S. R. Kalidindi, and L. Anand: The Royal Society, 1992, vol. 341, pp. 443–477.
57. S. R. Kalidindi, C. A. Bronkhorst, and L. Anand: J. Mech. Phys. Solids, 1992, vol. 40, pp. 537-69.10.1016/0022-5096(92)80003-9 ↗
58. J. Gubicza, N. Q. Chinh, J. L. Lábár, S. Dobatkin, Z. Hegedűs, and T. G. Langdon, J. Alloys Compd, 2009, vol. 483, pp. 271-74.10.1016/j.jallcom.2008.07.200 ↗
59. H. Wiedersich, JOM, 1964, vol. 16(5), pp. 425-30.10.1007/BF03398123 ↗
60. G. Schoeck and R. Frydman, Phys. Status Solidi, 1972, vol. 53, pp. 661-73.10.1002/pssb.2220530227 ↗
61. M. Kassner, J. Mater. Sci, 1990, vol. 25(4), pp. 1997-2003.10.1007/BF01045755 ↗
62. U.F. Kocks: J. Eng. Mater. Technol. Trans. ASME, 1976, vol. 98 Ser H, pp. 76–85.10.1115/1.3443340 ↗
63. S.R. Kalidindi: Ph.D. Thesis, Polycrystal Plasticity: Constitutive Modeling and Deformation Processing, Massachusetts Institute of Technology, 1992.
64. R. Hill: Proc. R. Soc. London A Math. Phys. Eng. Sci., 1948, vol. 193, pp. 281-97.10.1098/rspa.1948.0045 ↗
65. K. Zhang, B. Holmedal, O. S. S. Hopperstad, S. Dumoulin, J. Gawad, A. Van Bael, and P. Van Houtte, Int. J. Plast, 2015, vol. 66, pp. 3-30.10.1016/j.ijplas.2014.02.003 ↗
66. Y. Hanabusa, H. Takizawa, and T. Kuwabara, J. Mater. Process. Technol, 2013, vol. 213, pp. 961-70.10.1016/j.jmatprotec.2012.12.007 ↗
67. F. Barlat, H. Aretz, J. W. Yoon, M. E. Karabin, J. C. Brem, and R. E. Dick, Int. J. Plast. 2005, vol. 21, pp. 1009-39.10.1016/j.ijplas.2004.06.004 ↗
68. J. C. Pierret, A. Rassili, G. Vaneetveld, R. Bigot, and J. Lecomte-Beckers, Int. J. Mater. Form, 2010, vol. 3, 763-66.10.1007/s12289-010-0882-1 ↗
69. T. J. Shin, Y. H. Lee, J. T. Yeom, S. H. Chung, S. S. Hong, I. O. Shim, N. K. Park, C. S. Lee, and S. M. Hwang, Comput. Methods Appl. Mech. Eng, 2005, vol. 194, 3838-69.10.1016/j.cma.2004.10.002 ↗
70. H. Bašić, I. Demirdžić, and S. Muzaferija, Int. J. Numer. Methods Eng, 2005, vol. 62, pp. 475-94.10.1002/nme.1168 ↗
71. J.-H. Cheng: Int. J. Numer. Methods Eng., 1988, vol. 26, pp. 1-18.10.1002/nme.1620260102 ↗
72. W. K. Liu, T. Belytschko, and H. Chang: Comput. Methods Appl. Mech. Eng., 1986, vol. 58, pp. 227-45.10.1016/0045-7825(86)90097-6 ↗
73. D. J. Benson: Comput. Methods Appl. Mech. Eng. 1989, vol. 72, pp. 305-50.10.1016/0045-7825(89)90003-0 ↗