journal article·2017-11

An Atom Probe Study of κ-carbide Precipitation in Austenitic Lightweight Steel and the Effect of Phosphorus

L. N. Bartlett, D. C. Van Aken, J. Medvedeva, D. Isheim, N. Medvedeva, K. Song

Publisher page

Abstract

The influence of phosphorus on κ-carbide precipitation and alloy partitioning in an austenitic Fe-30Mn-9Al-1Si-0.9C-0.5Mo cast steel was studied utilizing a combination of transmission electron microscopy, 3D atom probe tomography, X-ray diffraction, and first-principles atomistic modeling. Increasing the amount of phosphorus from 0.006 to 0.043 wt pct P increased the kinetics of the initial ordering reaction. Specimens from the high-phosphorus steel showed some degree of short-range ordering of Fe-Al-C that took place during the quench. It was shown that phosphorus increases both the size and volume fraction of κ-carbide during aging. However, the distribution of phosphorus appears to be homogeneous, and thus long-range diffusion of phosphorus was not responsible for the observed increase in hardening. It is shown that phosphorus encourages the initial short-range ordering into the E21 structure of κ-carbide and also accelerates spinodal decomposition associated with carbon and aluminum diffusions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Advanced Materials Characterization Techniques · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. G. Frommeyer and U. Brux, Steel Research Int., 2006, vol. 77, pp. 627-633.10.1002/srin.200606440 ↗
2. R. Howell, T. Weerasooriya, and D. Van Aken: AFS Trans., 2009, vol. 117, pp. 751–763.
3. L. Bartlett, A. Dash, D. Van Aken, V. Richards, and K. Peaslee, 2012, AFS Trans, vol. 120, pp. 469–486.
4. G.S. Brady, H.R. Clauser, Materials Handbook, 1977, 11th Ed., p. 497.
5. O. Acelrad, L.C. Pereira, M.R. Amaral, Proc. of Proc. Prop. of Mats., 1992, pp. 829–34.
6. G. Kayak, Met. Sc. And Heat Tr., 1969, vol. 11, pp. 95–97.10.1007/BF00652271 ↗
7. K. Sato, K. Tagawa, and Y. Inoue, Metall. Trans. A, 1990, vol. 21 A, pp 5–11.10.1007/BF02656419 ↗
8. G.E. Hale, A.J. Baker: Conference on Alt. Alloying for Environmental Research, New Orleans, LA, 1986.
9. O. Acselrad, I.S. Kalashnikov, E.M. Silva, R.A. Simao, C.A. Achete, L.C. Pereira, Metall. Trans. A, 2002, vol. 33A, pp. 3569–3572.10.1007/s11661-002-0345-5 ↗
10. I.S. Kalashnikov, O. Acselrad, A. Shalkevich, L.D. Chumakova, and L.C. Pereira: J. Mater. Process. Technol., 2003, vol. 136, pp. 72–79.10.1016/S0924-0136(02)00937-8 ↗
11. K. Sato, Y. Igarashi, Y. Inoue, T. Yamazaki, and M. Yamanaka: International Conference Stainless Steels, 1991, pp. 503–09.
12. W.K. Choo and J.H. Kim: Conference on Thermo-mechanical Processing of Steels and Other Materials, 1997, pp. 1631–37.
13. K.H. Han, J.C. Yoon, and W.K. Choo, Scripta Metallurgica, 1986, vol 20, pp. 33-36.10.1016/0036-9748(86)90208-5 ↗
14. O. Acselrad, I.S. Kalashnikov, E.M. Silva, M.S. Khadyev, and R.A. Simao: Metal Sci. Heat Treat., 2006, vol. 48, pp. 543–53.10.1007/s11041-006-0133-8 ↗
15. K. Sato, K. Tagawa, and Y. Inoue: Mater. Sci. Eng. A, 1989, vol. 111, pp. 45–50.10.1016/0921-5093(89)90196-2 ↗
16. K.H. Han, W.K. Choo, D.Y. Choi, and S.P. Hong: Proceedings of the 116th Annual TMS-AIME Conference, 1987, pp. 91–106.
17. W. Choo, J. Kim, and J. Yoon, Acta Mater., 1997, vol. 45, pp. 4877-4885.10.1016/S1359-6454(97)00201-2 ↗
18. S. Karakishev and I. Kalashnikov, Phys. Met. Metall., 1986, vol. 62, pp. 187-190.
19. L.N. Bartlett, D.C. Van Aken, D. Ishiem, K. Song, and J. Medvedeva, Metall. Mater. Trans. A., 2014, vol. 45 pp. 2421-2434.10.1007/s11661-014-2187-3 ↗
20. L. Bartlett, A. Schulte, D. Van Aken, K. Peaslee, and R. Howell, MS&T Conf. Proceed., Houston, Texas, 2010, Oct., pp. 17–21.
21. R.A. Howell: Microstructural Influence on Dynamic Behavior of Age Hardenable FeMnAl Steel Alloys, 2009, PhD Dissertation.
22. N.I. Medvedeva, R.A. Howell, D.C. Van Aken, and J.E. Medvedeva, Phys. Rev. B.,2010, vol. 81, p. 012105-1-012105-4.
23. L. Bartlett, R. Howell, D. Van Aken, and K. Peaslee, AFS Trans., 2010, vol. 118, pp. 413- 423.
24. M. Mulholland, and D. Seidman, Microsc. Microanal. 2011, vol.17 p. 950.10.1017/S1431927611011895 ↗
25. K. Sato, K. Tagawa, and Y. Inoue, Scripta Metallurgica., 1988, Vol. 22, pp. 899-902.10.1016/S0036-9748(88)80071-1 ↗
26. C. Kim, S. Kwon, B. Lee, J. Moon, S. Park, J. Lee, and H. Hong, Materials Science and Engineering A., 2016, vol. 673, pp. 108-113.10.1016/j.msea.2016.07.029 ↗
27. B. Gault, M. Moody, J. Cairney, S. Ringer, Atom Probe Microscopy, Springer Science and Business Media, LLC, New York, NY, 2012, p. 282.10.1007/978-1-4614-3436-8 ↗
28. J.S. Langer, M. Baron, H.D. Miller, Phys. Rev. A, 1975, vol.11(4), pp. 1417–1429.10.1103/PhysRevA.11.1417 ↗
29. W. Xiong, J. Agren, and J. Zhou, arXiv:1205.4195 [cond-mat.mtrl-sci], 2012, pp. 1–5.
30. O.C. Hellman, J.A. Vanderbroucke, J. Rusing, D. Isheim, and D.N. Seidman, Microsc. Microanal., 2000, vol. 6, pp. 437-444.10.1007/S100050010051 ↗
31. H.C. Herper, E. Hoffmann, and P. Entel, Phys. Rev. B, 1999, vol. 60 p. 3839-48.10.1103/PhysRevB.60.3839 ↗
32. N.I. Medvedeva, D. Van Aken, and J.E. Medvedeva, J. Phys., Condens. Matter, 2010, vol. 22 p. 316002.10.1088/0953-8984/22/31/316002 ↗
33. W.A. Soffa and D.E. Laughlin, Acta Metall., 1989, vol. 37 pp. 3019–3028.10.1016/0001-6160(89)90338-6 ↗
34. G. Viswanathan, R. Banerjee, A. Singh, S. Nag, J. Tiley, and H. Fraser, Scripta Materialia, 2011, vol. 65, pp. 485-488.10.1016/j.scriptamat.2011.06.002 ↗
35. J. Zhao, and M. Notis, Acta Mater., 1998, vol. 4, No.12, pp. 4203-4218.10.1016/S1359-6454(98)00095-0 ↗
36. C. Corey, B. Rosenblum, and G. Greene, Acta Metallurgica, 1973, vol. 21, pp. 837-844 .10.1016/0001-6160(73)90140-5 ↗
37. I. Bartra, G. Dey, U. Kulkarni, and S. Banerjee, Mat. Sci. and Eng. A, 2003, vol. 360 pp. 220-227.10.1016/S0921-5093(03)00440-4 ↗
38. N.I. Medvedeva, M.S. Park, D.C. Van Aken, and J.E. Medvedeva, Journal of Alloys and Compounds, 2014, vol. 582 p. 475-82.10.1016/j.jallcom.2013.08.089 ↗
39. C.J. Smithells, Metals Reference Book, 1962, edited by William F. Gale, Terry C. Totemeier, Butterworth’s, London, p. 593.
40. C.J. Smithells, Metals Reference Book, 2004, edited by William F. Gale, Terry C. Totemeier, Butterworth’s, London, p. 13–21.
41. D. Laughlin, R. Sinclair, and L. Tanner, Scripta Metall.,1980, vol. 14, pp. 373-376.10.1016/0036-9748(80)90362-2 ↗
42. V. Daniel and H. Lipson, Proc. R. Soc., 1943, vol. 18A, pp. 368-78.10.1098/rspa.1943.0014 ↗
43. J. Udoh, H. Fujiyama, K. Hisatsune, M. Hasaka, and K. Yasuda, Journal of Mat. Sci., 1992, vol. 27 pp. 504-510.10.1007/BF00543944 ↗
44. K. Hisatsune and K. Udoh, Journal of Alloys and Compounds, 1991, vol. 176 pp. 269-283.10.1016/0925-8388(91)90035-T ↗
45. V. Lopez, A. Arias-Perez, L. Saucedo-Munoz, Journal of Mat. Sci. Lett., 2003, vol. 18 pp. 1697-1699.10.1023/A:1006633901400 ↗
46. F. Hernandez-Santiago, N. Cayetano-Castro, M. Lopez-Hirata, Dorantes-Rosales and J. Cruz-Rivera, Mater. Trans., 2004, vol. 45 pp. 2312–15.10.2320/matertrans.45.2312 ↗
47. Porter and Easterling, Phase transformations in metals and alloys, 2nd Edition, CRC Press, 1992, pp. 308–11.10.1007/978-1-4899-3051-4 ↗
48. S. Hill and B. Ralph, Acta Metall., 1992,vol. 30 pp. 2219-2225.10.1016/0001-6160(82)90142-0 ↗
49. K. Hono, S. Babu, K. Hiraga, R. Okano, and T. Sakurai, Acta Metall. Mater., 1992, vol. 40, pp. 3027-3034.10.1016/0956-7151(92)90466-R ↗
50. J. Zhou, J. Odqvist, M. Thuvander, S. Hertzman, and P. Hedstrom, Acta Mater., 2012, vol. 60, pp. 5818-5827.10.1016/j.actamat.2012.07.022 ↗
51. E. Eidenberger, M. Schober, P. Staron, D. Caliskanoglu, H. Leitner, and H. Clemens, Intermetallics, 2010,vol. 18 pp. 2128-2135.10.1016/j.intermet.2010.06.021 ↗
52. J. Hwang, S. Nag, A. Singh, R. Srinivasan, J. Tiley, H. Fraser, and R. Banerjee, Scripta Mater. 2009, vol. 61. pp. 92-95.10.1016/j.scriptamat.2009.03.011 ↗
53. L. Johnson, M. Thuvander, K. Stiller, M. Oden, and L. Hultman, Thin Solid Films, 2012, vol. 520, pp. 4362-4368.10.1016/j.tsf.2012.02.085 ↗
54. W. Xiong, P. Hedstrom, M. Selleby, J. Odqvist, M. Thuvander, and Q. Chen, CALPHAD: Comp. Coup. of Phase Dia. and Thermochem., 2011, vol. 35, pp. 355-366.10.1016/j.calphad.2011.05.002 ↗
55. M. Miller and R. Forbes: Materials Characterization., 2009, vol. 60, pp. 461– 69.10.1016/j.matchar.2009.02.007 ↗
56. I. Baker, R. Zheng, D. Saxey, S. Kuwano, M. Wittmann, J. Loudis, K. Prasad, Z. Liu, R. Marceau, P. Munroe, and S. Ringer, Intermetallics, 2009, vol. 17. pp. 886-893.10.1016/j.intermet.2009.03.016 ↗
57. M. Kato, T. Mori, and L. Schwartz, Acta Metall., 1980, vol. 28. pp. 285-290.10.1016/0001-6160(80)90163-7 ↗